Question about Cars & Trucks
The car was Import 2004 from Japan I have no car or radio manuals please help me?
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
The only way to get the code is giving the serial number off the radio to the loacl Honda dealer. They can then look it up through Honda's radio code database. If you remove the radio yourself, they might not charge to give you the code.
Posted on May 21, 2008
SOURCE: Stalling Toyota Camry 2004
P-0102 and P-0113 are mass air flow and intake air temp codes, the P-0136 is an Oxygen sensor code. Before you do anything, check for debris in the Mass Air Flow Sensor, it's small black box with electrical wiring connector that is screwed into the intake air tube, between the air box and the intake manifold. Undo the screws, remove the sensor, and, with a flashlight, and look down inside it for debeis, or broken wires inside it. If it's dirty, it could throw a P-0136...Comment back on what you find; hope this helps, and thanks for choosing FixYa!
Posted on Oct 24, 2008
Go into Toyota and take your registration with some form of Picture ID and for a fee they will be able to get you the code for that radio. Good Luck
Posted on Dec 10, 2008
I found three solutions somewhere, hope one works for you!
Good luck! Just tell me which worked.
I am wish to import a S40 too, can you give me the exporter's name and site?
. It went like this, turn radio on, when “code” is displayed push and hold “6” while pushing “power & volume” knobs at the same time. Let radio turn off while continuing to hold “6”. Turn radio back on by pushing both “power & volume” knobs at the same time. It worked on 98 V90.
#2 (JAPAN IMPORT)
-I emailed 2 Volvo Dealers and both replied 6666 is the code for all used Volvo imports from Japan, so I switched the ignition key to pos I for over 2.5 hours and "CODE" appeared, then pushed button 6 four times and the Radio swiched On. Problem solved.
-we altered the client access code input protocol by “rebooting” the stereo (turning it off and on using the combined volume/power input) and, at the same time, holding down the “stereo preset 6” button. The stereo then transitioned into the authenticated mode, allowing clients to listen to NPR without proving identity.
Posted on Jan 13, 2009
Tips for a great answer:
Nov 03, 2016 | Ford Cars & Trucks
Jun 13, 2015 | Toyota Cars & Trucks
May 03, 2014 | Toyota Camry Solara Cars & Trucks
Dec 07, 2013 | Cars & Trucks
Nov 03, 2013 | Audi Cars & Trucks
Mar 24, 2013 | 2004 Mazda 6
Sep 06, 2017 | Cars & Trucks
Aug 15, 2009 | 1998 Toyota Corolla
Jan 22, 2018 | Ford Cars & Trucks
27 people viewed this question
Usually answered in minutes!