Question about Acura RSX
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: A/C won't work 03 Acura RSX
General Troubleshooting Information
How to Retrieve a DTC
The Climate Control Unit has a self-diagnosis function. To run the self-diagnosis function, do the following:
1. Turn the ignition switch OFF.
2. Tu rn the fan switch OFF, the temperature control dial to MaxCool (60.F or 18.C), and the mode control dial to Vent.
3, Turn the ignition switch ON (ll),then press and hold the recirculation control switch. Within lO seconds while holding the switch down, press the rear window defogger switch five times. The recirculation indicator blinks two times and the A/C indicator comes on, then the self-diagnosis will begin. About 15 seconds later, the self diagnosis will finish and the Ay'C indicator goes off. lf there is any problem in the system after finished self diagnosis, the recirculation indicator will blink the Diagnostic Trouble Code (DTC) 1 through 13. When problems in the evaporator temperature sensor circuit are detected (codes 14 and t5), the A/C indicator will blink the DTC. lf no DTCs are found. the indicator will not blink.
Resetting the Self-diagnosis Function
Turn the ignition switch OFF to cancel the self-diagnosis function. After completing repair work, run the self-diagnosis function again to make sure that there are no other malfunctions.
Posted on Jan 17, 2009
I"m having trouble with locking and unlocking my hatch using my remote. I have flipped the white switch in the trunk and it acts as a child safety lock if flipped one direction. However I am not able to open the trunk this way. It acts as a permanent lock. So I figure the switch must be flipped the other direction and need to replace my actuator. Is this hard to do. It looks to me like it two switches holding a bracket to hold the actuator itself after plugging in the actuator from both sides. Is it really this simple?? Is there more to it???
Posted on Mar 04, 2010
First have a look at this video which shows the common places where you may find the code tag hidden in the vehicle itself.
If the code is not found inside the car at any of the locations mentioned in the video, there is a site here that says it can provide the code from the cars VIN number, as long as your details tally with the ownership database.
Hope this helps. Thanks for using FixYa.
Posted on Aug 16, 2010
Tips for a great answer:
Nov 17, 2016 | 2002 Acura RSX
Aug 23, 2014 | 2002 Acura RSX
Jul 24, 2012 | 2002 Acura RSX
Mar 29, 2011 | 2002 Acura RSX
Apr 29, 2010 | 2002 Acura RSX
Jan 15, 2010 | 2002 Acura RSX
Sep 30, 2008 | 2002 Acura RSX
Oct 19, 2017 | Acura Cars & Trucks
67 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: