Question about 2003 Toyota Tundra

Open Question

HOW TO REPLACE HOOD RELEASE CABLE ON 2003 TUNDRA

How to install

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 56 Answers

SOURCE: Where is the hood release latch in the grill of an

UNDER THE HOOD RIGHT IN THE MIDDLE OF THE GRILL

Posted on Jan 22, 2010

Bray2thaden
  • 173 Answers

SOURCE: hood will not release

You need to remove the black plastic mud guard from under the bumper, use a 10 or 12 mm socket with extention to reach the hood latch from under the car, un bolt the latch and lift the hood up to repair. Hope this helps.

Posted on Mar 20, 2010

  • 120 Answers

SOURCE: my hood release cable has been pulled but doesnt

Tap on the hood while somebody else pulls the leaver, try pulling up on it to. If this does not work you will have to try to gain access to the hood latch and pull the leaver where the cable is attached to open the hood. The cable may be stretched or broke.

Posted on Sep 12, 2010

jimmybrown67
  • 835 Answers

SOURCE: How do I replace a hood release cable for my 2000

unhook from latche ***. couple clamps down driver fender holding cable -rubber gorment thru fire wall -cable handle bolts under dash - put back in reverse order

Posted on Nov 05, 2010

  • 1403 Answers

SOURCE: the interior hood release isnt

try this,have another person push down on the hood in the front of your truck,while they apply downward pressure,pull hood release out,keep the hood release pressure pulled out,tell the other person to let up on hood,then release the pressure you have on the hood release handle and hood should pop up.if this does'nt work,you have a broken hood release cable.that means you'll have to get on the ground under front of truck and reach up to the hood release cable with pliers and pull the cable release manually.good luck hope this helps and thank you for choosing fixya.com

Posted on Jan 10, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hood wont open


It may be that your hood release cable that runs from the hood release is broken. You'r going to have to try and manually release the hood latch by tripping the release through the grill with something like a long screwdriver. You should be able to identify the latch trigger by following the cable to end.
You might also try having push down on the hood while another person tries to trip the latch if the cable isn't broken, but just stuck.

Feb 20, 2013 | 2003 Chevrolet Malibu

1 Answer

Toyyota tundra hood cable not connected to verticle rod connected to latch under grill.Hood is popped up 1 inch. How and where do I reach cable.


Hi Mark, If you lift the hood with your right hand once it has been released from the release lever inside the cabin, around the centre of the hood you will feel (and if you stoop down, you can see) the safety locking latch, which is released by pushing the lever upwards. This operation is carried out as you stand in front of the vehicle and lift the hood allowing that space. Regards John

Jan 19, 2013 | 2003 Toyota Tundra

1 Answer

Saturn ion hood release


Take it to a Saturn dealer with a service department and they will repair or replace it for you.

Jul 27, 2012 | 2003 Saturn ION

1 Answer

I need help on how to change a headlight bulb on my 2000 toyota tundra


  • 1 Open the Tundra's hood and locate the back of the headlight assembly inside the engine compartment.
  • 2 Unplug the electrical connector from the assembly and remove the rubber cover from the bulb socket.
  • 3 Release the retaining spring to loosen the old bulb, and then pull it directly out of the socket. Carefully dispose of the bulb to prevent it from cracking or shattering.
  • 4 Align the tabs of the new bulb with the cutouts of the mounting hole. Then, carefully press the bulb into the socket until it's secure.
  • 5 Install the rubber cover in its original position and reattach the electrical connector to the headlight assembly. Make sure the rubber cover is fastened to the socket before continuing.
  • 6 Start your Tundra's engine and test the headlights to make sure they work before closing the hood.

Jul 30, 2011 | 2002 Toyota Tundra

1 Answer

The interior hood release isnt working is there a way to relase the hood manually from outside the truck on a 2010 toyota tundra


try this,have another person push down on the hood in the front of your truck,while they apply downward pressure,pull hood release out,keep the hood release pressure pulled out,tell the other person to let up on hood,then release the pressure you have on the hood release handle and hood should pop up.if this does'nt work,you have a broken hood release cable.that means you'll have to get on the ground under front of truck and reach up to the hood release cable with pliers and pull the cable release manually.good luck hope this helps and thank you for choosing fixya.com

Jan 10, 2011 | Toyota Tundra Cars & Trucks

1 Answer

My 2003 misubisi eclipse hood latch cable is broken how can i open the hood


This happened to my 2003 mitsubishi Galant... We wound up having to use some cable cutters and cut the cable, then pull the cable out through one of the grill slots, pull off the cover/sheath around the cable, and then we were able to pull the cable and release the latch. If it is already broken and you're going to have to replace it, then you're not hurting anything to cut the cable. Good luck to you.

Oct 24, 2010 | 2002 Mitsubishi Eclipse

1 Answer

Broken Hood Release


Hello There

In short no there isn't, however it's most likely your plastic release lever is broken and not the metal cable, you need to open the cover over the release lever, there will be a cable you can pull using a gripper and it will release the bonnet, you can easily replace the plastic llever and it's reletively cheap.

Hope this helps, please don't forget to rate me.

May 20, 2009 | 2003 Toyota Sienna

1 Answer

2003 ranger.the hood will not open. i think cable is loose /broke


You will need 2 people to get the hood open. While you pull on the hood release cable have an assistant gently pound on the center of the hood until it pops up. If this does not work, inspect the hood release lever to see if the pivot broken, if so pull directly on the cable with a pair of locking pliers. After you get the hood open make sure to spray the latch with penetrating oil (WD40)

Dec 17, 2008 | 2003 Ford Ranger Regular Cab

2 Answers

Hood latch


There is no other way to release the hood other than either trying to reach the latch release from under the car or removing the grille.

Jul 28, 2008 | 1993 Acura Legend

Not finding what you are looking for?
2003 Toyota Tundra Logo

Related Topics:

92 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...