Question about 1999 Toyota Corolla

1 Answer

1999 Toyota Corolla Drivers side door handle broke during freeze

How do I replace the drivers side door handle? The inside door handle quit working also. Is this super hard to fix?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 840 Answers

Very easy there are little cover u need to take screws out of the pull the trim panel starting from the bottom take mirror cover of and pull the trim of there is a vapor plastic easy after that

Posted on Jan 26, 2009

  • Marc Podeszek Jan 27, 2009

    Please rate my response. Thank you !

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The driver side door broke on my 1996 toyota corolla


you will have to pull off door panel and reconnect door latch rod into handle assembly.

Nov 12, 2012 | 1996 Toyota Corolla

1 Answer

Have a 2000 Toyota Corolla. The entire inside door handle on the driver's side broke off. What to do?


You need to get a new one from the dealer, just tell them the color or have the VIN number handy.

Sep 06, 2010 | 2000 Toyota Corolla

1 Answer

The rear door on drivers side of 1992 Toyota Corolla is broken. my grandson tried to open the door when it was locked then it would not open using the outside handle, but would open using the inside...


Actually, I suggest going to a junk-yard to get your parts. It will be much more expensive to get at your dealership or bodyshop, plus the huge huge huge labor fee. If you want to invest a few minutes to save yourself some time, look to see what other vehicles use the same door handle yours does, (it will be a toyota).

Mar 17, 2010 | 1992 Toyota Corolla

3 Answers

How can I fix the door handle on the inside of 1999 Toyota Coroll


It's probably broken, or unhooked. Just take your inner door panel off, and you'll soon figure out what's happening. Sometimes the rods get bent, or they come off the clip, or just need adjusting. And sometimes the handle itself is broken, but you can do it!

May 16, 2009 | 1998 Toyota Corolla

1 Answer

Replacing a manual door mirror on 1999 toyota corolla


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door

Feb 27, 2009 | 1999 Toyota Corolla

2 Answers

1995 Toyota Corolla Door Handle


My husband (who is a weight lifter) managed to bust our door handles three times during the hot summer months. It was about $35 for the not so fancy handles and installation, I think over $50 for someone to do the fancy painted handle (driver's side door). We had it done since I think at least one of the times, the door would have had to be dismantled.
FYI the Toyota dealer said that in the hot summer months, the door handles were the items ordered the most for Toyotas across the board. We don't live in a hot climate anymore, and havent had any problems with melted/broken handles.

Feb 09, 2009 | 1995 Toyota Corolla

2 Answers

How to fix 1999 Toyota Corolla Outside Drivers Door Handle LH?


i have a corolla i have been through 3 drivers door handles for some reason they break fairly easy the handles aftermarket are usually 50 bucks or so and i should take about an hour to replace so idk what ur mechanics hourly rate is but this should be a rought idea

Dec 23, 2008 | 2000 Toyota Corolla

1 Answer

1999 Toyota Corolla interior door handle


There's two screws by the handle, pull those out and you'll see how it all connects on the inside. I was able to remove my broken one, and drill a hole into the plastic where it broke and reuse it - it's lasted over 4 years now. 

Aug 11, 2008 | 1999 Toyota Corolla

Not finding what you are looking for?
1999 Toyota Corolla Logo

381 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

60769 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...