Question about 2002 Audi allroad

Open Question

Audi A4 97 reverse doesnt work

97 Audi A4. Reverse gear doesnt work it seems to be in Neutral when I put the selecter in Reverse, was on and off for a while but now it just doesnt reverse. please help
NB The car runs good in all other gears.
thanks

Posted by on

3 Suggested Answers

  • 5 Answers

SOURCE: Gear 1 and reverse gear can no longer be engaged in my Audi A4

Thanks I got the solution it was fixed this morning. One of the gear links was loose and out of place just at the gearbox level

Posted on Nov 18, 2008

chain saw
  • 94 Answers

SOURCE: Gear Selection Audi A4

GEAR LINKAGE ADJUSTMENT IS UNDER GAITER PLUS REMOVE ASHTRAY .......BUT I WOULD CHECK FOR WORN OR DAMAGED GEAR LINKAGES ....CLUTCH FAULT WOULD BE THE NEXT THING

Posted on Feb 18, 2009

  • 188 Answers

SOURCE: hi, have a 99 audi a4 1.8t tiptronic with issue on

Hi,it can be one of two things the oil level in box to low or torque converter is on its way out.Get it to a garage to get the oil level checked and take it from there.hope this helps.Conraad

Posted on Jul 23, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2005 Audi A5 steering is get stiff after few minutes of starting in the morning. This is the situation even with enough power steering oil. The power steering doesn't work. The gear system also has a...


Check the gear box oil level sounds low to me i had a similar problem with a auto box car before and as for your steering it could be a worn steering rack if the oil level is good

Feb 03, 2015 | Audi A5 Cars & Trucks

2 Answers

Audi a3 auto reverse gear doesn't move


run fault codes and look for faulty TCM and reverse servo .

Nov 29, 2013 | Audi Cars & Trucks

1 Answer

97 audi a4 won't go into reverse, acts like it is in neutral


either you have lost the reversing gear or the gear shifting solenoid will not work.

Sep 03, 2012 | Audi A4 Cars & Trucks

1 Answer

Hi, have a 99 audi a4 1.8t tiptronic with issue on reverse gear, 'not enough pressure' when attempting to reverse (especially up steep gradiant) have to put into neutral then back into reverse gear...


Hi,it can be one of two things the oil level in box to low or torque converter is on its way out.Get it to a garage to get the oil level checked and take it from there.hope this helps.Conraad

Jul 21, 2011 | 1999 Audi A4

2 Answers

When i put my truck into reverse my lights dont work however if i pull my shifter back inbetween reverse and neutral if i get this one spot they come on


There is usually a switch mounted on the transmission. Perhaps it has gotten loose or something is worn or broken. Your gear selection goes park, reverse, neutral and drive. Since the switch is not coming on from park to reverse but it kinda does if you go past reverse (neutral) then it sounds like the switch has moved from its original place. That's why I think it is loose. Good Luck!

Mar 15, 2010 | 1998 Jeep Cherokee 4WD

1 Answer

No reverse gear if you put the car in reverse you actually are in neutral but the cable is not the problem. there is however possibly a problem with the neutral safety switch. you don't have to put the...


the neutral safety switch is only there to inhibet starting while the car is in gear can u select reverse gear at the gearbox with the cable disconnected

Feb 21, 2010 | 2000 Kia Sephia

1 Answer

No reverse neutral sends truck in drive


try putting on a transmission filter kit

Feb 07, 2010 | 1997 GMC Sierra

1 Answer

Transmission is stuck in reverse but the shifter is in neutral and will not go in gear


Check for wear in the gear lever selector/gate mechanism.
It may have allowed the lever to select reverse, the 'jump' the lockout gate back to neutral position for selection of forward gears.
You may be able to de-select reverse if you access the lever directly at the gearbox case.

Oct 14, 2009 | 1993 Jeep Wrangler

1 Answer

Transmission: Reverse


check power going to reverse shift solynoid and check neutral switch

Sep 25, 2009 | 2001 Hyundai Accent

1 Answer

My magna wont slect Drive without flashing Neutral also


i bypassed my heater coil and gave my ecu a clean and now works as normal

Jun 11, 2009 | 1999 Mitsubishi Diamante

Not finding what you are looking for?
2002 Audi allroad Logo

Related Topics:

135 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audi Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

yadayada
yadayada

Level 3 Expert

63456 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

13213 Answers

Are you an Audi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...