Question about 2003 Mercury Grand Marquis
When you say the engine is hot are you talking about the normal operating temperature? Has the Check Engine or Service Engine light come? If so, was the On Board Diagnostics system checked for a codes? Usually a knocking sound during acceleration indicates a improper fuel mixture or low octane.
Posted on Jan 19, 2013
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Does it only change when going uphill, or under heavy acceleration? Or is it just when ever it feels like it? Generally, it's vacuum controlled and on a Ford, loss of vacuum when accelerating or pulling a grade under heavy loads can be normal, causing the air to come out of the defrost. To answer your question, the blower door is located in the dash, generally behind the radio area.
Posted on May 22, 2010
Remove all screws to door panel. Remove the lock and window controls. Then take large flat-tip screwdriver and gently pry directly next to plastic studs holding panel on to door. Lift door panel off. Remove plastic out of the way. You will now have access to window motor. You may have to solder off old wiring. Or if you have enough to cut, would be good
Posted on Sep 11, 2009
SOURCE: 2003 mercury grand marquis LS
The blend door is stuck in cold position. That usually happens because the blend door actuator has failed.
You will need to test and replace the blend door actuator.
To replace the actuator you will need to take apart the dash and remove completely the instrument panel,d isconnect the connector, remove the four screws, remove the temperature blend door actuator and replace it.
The replacement is not a job for beginners, since you have to take apart the dash to access the actuator.
Posted on Nov 18, 2009
SOURCE: How to reset Check Engine
You can remove the NEG battery terminal for 10 minutes and it will clear. Or go to Autozone or Oreillys for a free scan, find out why it came on, then have them clear it with their scanner.
Posted on Dec 02, 2010
Tips for a great answer:
Feb 25, 2017 | 2003 Mercury Grand Marquis
Sep 11, 2014 | 1997 Mercury Grand Marquis
Aug 02, 2011 | 2003 Mercury Grand Marquis
Feb 19, 2011 | 1996 Mercury Grand Marquis
Nov 07, 2010 | 1992 Mercury Grand Marquis
Jun 14, 2010 | 2003 Mercury Grand Marquis
May 22, 2010 | 2003 Mercury Grand Marquis
Jun 05, 2009 | 2003 Mercury Grand Marquis
325 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: