Question about 2002 Toyota Camry

1 Answer

Compressor not coming on

I have a 1997 Toyota Corolla in which the compressor isn't coming on. The blower motor also doesn't work in the low position and when you depress the A/C switch the light doesn't come on. I am leaning towards the Blower motor switch since it does work in all the other setting except for low and I think that is where the A/C switch is wired to get its power from. So anyone out there with some experience with this please help.

Posted by on

  • Angelo Attard
    Angelo Attard May 11, 2010

    have you checked fuses

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Toyota Master
  • 443 Answers

First if the compressor isnt coming on at all .. it has a pressure switch that if it is low on freon it will not kick in .. and if your switch only works in one or two positions it is needing replaced..

Posted on Jan 26, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

TROUBLE SHOOTING THE Air Condition system


Hi, when it comes to vehicle air conditioning I advise taking it to a
professional with the appropriate experience/qualification...I have heard instances of individuals being blinded by freon.
If your blower only works sometimes might be that the compressor has issues.

Jun 20, 2015 | 1997 GMC Sierra

1 Answer

2003 Toyota Corolla AC Blower/Fan will not turn on, I replaced the Blower/Fan a few weeks ago,


A/c compressor works fine and the blower motor works and shutdown right? it is the problem with the blower resistor or with blower motor relay. try to direct the resistor irrespective of the speed. hope the problem may be solved.

Jun 05, 2014 | 2003 Toyota Corolla

1 Answer

The compressor is working but the ac is still blowing hot air what's the problem


even if the compressor is turning doesn't mean the compressor is good. You need to have someone put a set of gages on your system to see what the pressures are on the high side and the low side.This will give you an idea what your problem is.

May 29, 2012 | 2003 Toyota Corolla

1 Answer

03 Corolla A/C will not work. A/C light comes on, engine speeds up, compressor will not run. Tests show no elect to the compressor coil, and, when jumped by a hot wire the coil will not engage the clutch...


It should have a low freon pressure switch.This may be worn or the system has low freon and this switch is over rideing the power the compressor clutch.

Nov 05, 2009 | 2003 Toyota Corolla

1 Answer

2005 Toyota Corolla A/C compressor cycling problem.


Could be low on freon. Or the cycling switch is bad. Hope this helps.

Jun 20, 2009 | 2005 Toyota Corolla

2 Answers

I want to put some freon into the AC but cannot locate the "low" valve. The RedTek guage will not fit onto the "high" valve.


follow the lines coming out of and into the compressor. The line leading from the firewall to the compressor is the low pressure line.
the line going from the compressor to the condenser located in front of the radiator is the high side.
Always charge with can in upright position through the low side line into the compressor.

Jun 05, 2009 | 2003 Toyota Corolla

2 Answers

1995 toyota corolla ac not working


if the compressor was locked up the drive belt would come of when u engage the AC compressor, your problem is most likely a low charge

Mar 31, 2009 | 1995 Toyota Corolla

1 Answer

I have a 1997 toyota Corolla and the compressor is not coming on. The blower doesn't work in the low position nor does the a/c switch light come on when you depress the switch. I think it is the blower...


Blower Motor Not Working in LOW only Indicates Resistor is Bad Simple Replacement

It Has 4 Wire Plug and is Held in By 2 screws


BLOWER RESISTOR REMOVAL

  1. Remove Glove Compartment Parts
2. Remove Blower Resistor
  1. Disconnect the connector from the blower resistor.
  2. Remove the 2 screws and the blower resistor.
BLOWER RESISTOR INSTALLATION
Installation is in the reverse order of removal

Also seems you are correct About the A/C Switch
Another Simple R7R Tape the end of a Smaller Flathead Screwdriver with Electrical tape --to Protect your dash

Remove A/C Switch
Using a screwdriver, pry loose the clips and remove the A/C switch.

REMOVAL HINT: Tape the screwdriver tip before use.

SWITCH INSTALLATION
Installation is is the reverse order of removal.

This Should Correct your Problems ///Beyond this is a Simple Recharge of A/c System With Freon R134A// I Truely Hope That this Sends you on your way Pleased with My Advise If so and you Feel Im worthy if a Good Rating then Feel Free to rate me as Fairly as you Feel I Deserve I hope to Represent FixYa.com Properly and I thank you for Your Time Have A Great Day!!!

Jan 26, 2009 | 2002 Toyota Camry

Not finding what you are looking for?
2002 Toyota Camry Logo

115 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

60792 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...