Question about 2009 Dodge Journey

Open Question

Replace 2009 journey front hub assembly - 2009 Dodge Journey

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

slazabaza
  • 47 Answers

SOURCE: front wheel hub assembly replacement

if you have basic knowledge you should be able to carry out this job yourself. you will probably need to ring a dealership and ask very kindly if you could have the torque settings for the nuts and bolts ect.

hope this helps.

Posted on Mar 18, 2009

slazabaza
  • 47 Answers

SOURCE: 2004 dodge stratus SE wheel hub assembly

you should be able to carry out this job yourself. you will need to contact your dealer and ask very kindly for the torque settings for the nuts and bolts ect.

hope this helps.

Posted on Mar 18, 2009

  • 101 Answers

SOURCE: replacing front wheel hub assembly 1996 Dodge caravan

first jack up the van remove the wheel remove the brake caliper and rotor remove the axel nut then remove the three bolts on the back of the hub tap on the hub with a hammer it should come out hope this is helpful

Posted on Mar 19, 2009

  • 1 Answer

SOURCE: 2001 Dodge 2500 Front Hub Assembly removal

Get a Haynes book for your model truck for less than $20.00. It has pictures and written directions. It is easy to do.

It is foolish to work on your truck without a service manual. You can order one on the internet or go to a Strauss or Pep Boys store,

Posted on Oct 18, 2009

  • 869 Answers

SOURCE: Brake light stuck on. 2009 Dodge Journey. Front

get the batteries of ur remote changed

Posted on Jan 23, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to change abs sensor on right front


You might need a new wheel hub. My experience is some sensor r built into the hubs. May not be a do it yourself deal depending on your skill level

Mar 29, 2016 | 2009 Dodge Journey SXT

1 Answer

How do I replace front wheel bearing?


You should have a sealed hub assembly. You change the whole thing as a unit. You need to remove the wheel and brake caliper, rotor, hub nut, and sometimes have to take off the swaybar end link and pop the lower ball joint to separate the lower control arm from the spindle to gain access to the hub bolts on the back side of the spindle to remove the hub assembly.

Aug 14, 2015 | 2009 Ford Fusion

1 Answer

Does the front wheel hub have one or two bearings ?.


its one unit hub and bearing and abs in sealed assembly

Mar 12, 2015 | 2009 Pontiac Torrent

1 Answer

How do I replace front wheel bearing on 2009 dodge journey?


REMOVE TIRE CALIPER CALIPER BRAKET BRAKE DISK THEN REMOVE CENTER NUT FOR THE U JOIN AND REMOVE THE BOLT FOR THE HUB ASSY AND REMOVE HUB

Oct 05, 2014 | Cars & Trucks

1 Answer

How to remove headlight assembly on 2013 Dodge Journey


First, you need to disconnect the negative battery cable. Then loosen up the front fascia on the side where you are removing the headlight assembly. Remove the 4 push pins that fasten the upper grille to the FEM (Front End Module). You will then need to push the fascia and grille forward enough so that you can remove the three screws which hold the headlamp assy. to the FEM. Finally, you pull the assy. far enough away from the FEM to reach the headlampand dash wire connectors from the rear of the headlamp housing.

Jul 25, 2014 | 2009 Dodge Journey

1 Answer

How to replace front disc brake pads on a 2009 Dodge Journey?


remove the front wheel and support the van then remove the two bolts that hold the caliper then remove the old pads then using a clamp or big channel lock plies press the caliper piston in so the caliper can go on after you put on the new pads after you would of replace your wheels pump up your breaks and check to see if you need to put in some more brake fluid

May 03, 2014 | 2009 Dodge Journey

1 Answer

Own a 2009 Dodge Journey I have had front brakes/routers replaced at 20,000 mile now its time for back brakes at 40,000k. How much will this cost?


i cant imagine already having to replace brakes, look into a recall. Around $160.00 if you do it yourself.

Jan 29, 2011 | 2009 Dodge Journey

2 Answers

Brake light stuck on. 2009 Dodge Journey. Front brakes and rotos replaced at 40,000 miles. Keyless remote still is working.


Brake light switch mounted just above your brake pedal under dash is mis-aligned and/or defective

Jan 04, 2011 | 2009 Dodge Journey

1 Answer

How do I replace the antenna base?


have to have front and back rotors done and brakes done

Oct 13, 2009 | 2009 Dodge Journey

Not finding what you are looking for?
2009 Dodge Journey Logo

Related Topics:

78 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...