An expert who has achieved level 3 by getting 1000 points
An expert that got 10 achievements.
An expert that got 5 achievements.
An expert whose answer got voted for 500 times.
Re: headlight on a 2005 trailblazer ext, passenger side
Hello the lens has to come out.There is the plastic grill in front of the lights this has to come out.some are clipped in some have tiny screws .You will have to put the hood up.once this piece is off there should be two clips that hold the lens in pull up carefully slide out lens to get to bulb.twist out socket.reverse order. you can do this! thank you
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Reach your hand down by the alternator, then over to the back of the headlight assembly. There, you'll feel a 3" round rubber boot that just pulls off by hand. Take this boot off, and twist the light bulb out and replace it with a new one.
The other way, is to pull the grill out, and release the little metal latches on the top and side of the headlight. Be careful though, the grill is brittle.
You need to remove the clips that hold on the grill, so you can pull away the grill as far as you can. You'll need to partly remove the headlight assembly to get to the bulb. Small hands are a plus!!!!
if its the vortec 6 it will be located on the passenger side of the engine just in front of the accordian boot visable when you are underneath and looking up near the right ft wheel well. there will be a panel on the botton of the truck that has 2 screws that rotate 1/2 turn then release. remove the panel to get access to the filter.
Open the hood and look at the side of the car that the bulb is shot. There should be two metal pins that should swing out and lift off. With these pins out you should be able to pull the headlight bezel out replace the bulb. Generally they twist off the bezel.
If ther is no openings on the headlight bezal then cheeck behind the rad. support just behind headlight and there should be 2 retaining strapes there about 3in. long and just pull stright up. the ***. should pull stright out.
sound like the heater core. you can bypass the heater core. there are 2 hoses under the hood on the pass side of the vehical on the fire wall undo the hose clamps on both hoses and ties the 2 hoses together