Question about 2005 Chevrolet Malibu

Open Question

What does code P 0826 mean on a 2005 Chevy Malibu 2.2L?

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

awcforever
  • 359 Answers

SOURCE: I have a 2005 Chevy Malibu. The check engine

"This indicates a fuel vapor leak in the EVAP control system. It means a very small leak has been detected. In fact, the leak can be from a hole as small as 0.04" in diameter. The (EVAP) emission control system prevents the escape of fuel vapors from a vehicle's fuel system. Fuel vapors are routed by hoses to a charcoal canister for storage. Later, when the engine is running a purge control valve opens allowing intake vacuum to siphon the fuel vapors into the engine."
Hope that helps..

Posted on Mar 25, 2009

  • 12 Answers

SOURCE: I have a 2005 Chevy Malibu Maxx. It has a TC

i think it stands for traction control. most cars with that say ETC which stands for electronic traction control. if you have a manual for the car it should say what it is.

Posted on Sep 27, 2009

  • 122 Answers

SOURCE: error code 0108

your MAP sensor is receiving a High Input. possible causes are as follows: this means that the circuit is open or shorted to the VREF, the grounding circuit is open between the sensor and the PCM, the sensor is damaged, PCM has failed. possible causes for the sensor to fail, extended engine cranking or a backfire. I hope this helps you, thanks

Posted on Oct 06, 2009

  • 52 Answers

SOURCE: I have a 2005 Chevy Malibu. I need to know if it

front wheel drive , please leave feedback

Posted on Nov 22, 2009

  • 115 Answers

SOURCE: where do i fill transimision

Pull out the dip stick for the transmission, use a transmission funnel and pour in the transmission fluid.

Posted on Mar 18, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi there, I have a 2005 Chevy Malibu 3.5L engine with an error code B3948. Does anyone know how to resolve this? Thanks!


See if the signal flashes, buy a new bulb. Some Chevy no longer use a flasher relay, the signal comes from the body computer.

B3935Transponder Authentication Error
B3948Left Front Turn Signal Circuit
B3949Right Front Turn Signal Circuit
B3950Left Rear Turn Signal Circuit

List of Diagnostic Trouble Codes for 2008 2010 HHR Chevy HHR Network

Dec 01, 2016 | 2005 Chevrolet Malibu

1 Answer

2005 Chevy Malibu Maxx is throwing codes for both seat belt retractors is there a way to troubleshoot this?


no because a volt meter uses power and that can blow off the charge they did have connector problems so look close to them

Oct 10, 2012 | 2005 Chevrolet Malibu

1 Answer

2005 chevy malibu radio lock have the code cant figure out how to put it in


you use the radio preset numbers to install the code then push am-fm button

Jul 07, 2012 | 2005 Chevrolet Malibu LS

1 Answer

Where do i fill transimision fliud 2005 malibu classic 2,2l automatic


Pull out the dip stick for the transmission, use a transmission funnel and pour in the transmission fluid.

Mar 18, 2011 | 2005 Chevrolet Malibu

1 Answer

ENGINE LIGHTS ON 2005 MALIBU MAXX MEANING? I DON'T


TAKE VECHICLE TO AUTO ZONE OR ADVANCE AUTO PARTS THEY WILL CODE SCAN YOUR VECHICLE FREE.SERVICE ENGINE SOON LIGHT COMING ON COULD MEAN EVAPORATIVE LEAK OR CYLINDER MISFIRE.BUT AUTO ZONE WILL SCAN IT AND TELL YOU WHAT TROUBLE CODE YOU ARE GETTING.

Aug 07, 2010 | 2005 Chevrolet Malibu Maxx

2 Answers

2005 Chevy Malibu gas cap tightened, chk eng still on.


It needs to be reset probably has a p0440 code in the computer.

Jul 24, 2010 | 2005 Chevrolet Malibu

1 Answer

Error code 0108 2005 chevy malibu


your MAP sensor is receiving a High Input. possible causes are as follows: this means that the circuit is open or shorted to the VREF, the grounding circuit is open between the sensor and the PCM, the sensor is damaged, PCM has failed. possible causes for the sensor to fail, extended engine cranking or a backfire. I hope this helps you, thanks

Oct 06, 2009 | 2005 Chevrolet Malibu

3 Answers

I have a 2005 Chevy Malibu. The check engine


"This indicates a fuel vapor leak in the EVAP control system. It means a very small leak has been detected. In fact, the leak can be from a hole as small as 0.04" in diameter. The (EVAP) emission control system prevents the escape of fuel vapors from a vehicle's fuel system. Fuel vapors are routed by hoses to a charcoal canister for storage. Later, when the engine is running a purge control valve opens allowing intake vacuum to siphon the fuel vapors into the engine."
Hope that helps..

Mar 25, 2009 | 2005 Chevrolet Malibu

Not finding what you are looking for?
2005 Chevrolet Malibu Logo

Related Topics:

75 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8215 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...