Question about 1995 Chevrolet K1500

Open Question

1995 gmc yukon the speedometer ,odometer gear indicator and tach will not shift down stuck in hight gear i change the cluster and it did not change

Posted by Anonymous on

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 2 Answers

SOURCE: I have a 1995 Chevy

i have a 95 k2500 350 just put in a new tranny and less than 90days later there is little to no pressure. Thinking it is a bad pump but could be the ecu thing as well since the previous tranny went out the same way. If you know where to locate it any help would be great! c = 2wd k = 4wd

Posted on Sep 29, 2008

Mechanic65
  • 142 Answers

SOURCE: Have a 95 GMC truck and the speedometer, odometer,

Check fuse 20 on Insturment Pannal fuse block.

Posted on Oct 09, 2009

Testimonial: "That's amazing I was expecting some generic answer. I checked it and it is good. I think I'm going to have to bear down and take in to the shop."

  • 66 Answers

SOURCE: 1997 gmc 1500 went to

Check transmission fuse its the one labeled PRNDL or similar.Use a test light when you check it by the way.If the fuse is good then its probaly your ignition switch failed.If that fuse is bad or the ignition switch is not suppling power to that fuse your tack,speedo,and gear indicator wont work, and your transmission will go into a safe mode.Safe mode is just the transmission staying in 3rd gear all the time until you fix this.

Posted on Nov 21, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi i have a 1995 ford mustang 3.8 v6 5 speed my trip meter doesnt work ive had the instrument cluster replaced and still dont work odometer and tach work just not the trip how to fix thanks


Fords in that era are notorious for broken plastic gears in the assembly. If the Speedometer works and the odometer works but the trip odometer does not work, you can still have a broken or stripped plastic gear. They are very small and cost about $25 but they are a pain to replace. You can send your cluster off to have it repaired by a reputable shop. Just Google instrument cluster repair.

Dec 17, 2014 | Cars & Trucks

1 Answer

Tranmission and instrument cluster


The speed sensor on your trans sends a signal to the electronics telling it when to shift, this will be where you fault is.

Mar 05, 2012 | 2001 GMC Yukon XL

1 Answer

Today I started my 1997 GMC Sierra K1500 4x4 and the little light that moves under the P R N D 3 2 1 shift indicator did not come on. Neither the speedometer nor tachometer work and the truck drives...


1997 GMC Subburban 1500 loses Tach Speedo and Trans sticks in High Gear. I changed the ignition Starter switch which I read was the problem but problem is intermittant and still exist? AMMCO told me to try changing the Neutral Saftey switch first, but didn't say why?

Oct 07, 2010 | 1997 GMC Sierra K2500

3 Answers

2005 gmc yukon speedometer doesn't work. Odometer still working though. How do i fix it? is it speedometer cluster?


It could be the cluster but I would look at the speed sensor first. It is located on the transmission. You should get a Haynes manual on your vehicle from the local auto parts store before going into the job.

Jul 18, 2010 | 2006 GMC Yukon

1 Answer

Have a 95 GMC truck and the speedometer, odometer,


Check fuse 20 on Insturment Pannal fuse block.

Oct 09, 2009 | 1995 Chevrolet K1500

1 Answer

97 Chevy truck cluster and transmission


I would say its your Ignition switch or the fuse for tranny is blown or the tranny is unplugged.My truck had a problem where it was stuck in third gear, the tach never moved,the gear indicator light went out.I left it at the tranny shop all day and nobody could find the problem.All you need to do is check your fuses with a test light.I looked at all my fuses and they were all good but when I used a test I found that some fuses didnt have power supplied to them from the ignition switch.Your fuses need power on both sides to complete that circiut.So I would say go get a test light because they are cheap and check your fuses before you go right back to the parts store for that ignition switch.Good Luck

Apr 06, 2009 | 1997 Chevrolet C1500

1 Answer

Electrical ?


probally need to check engine groundwires. clean all terminals. battery may have loose terminal.

Jan 14, 2009 | 1999 GMC Sierra

1 Answer

My speedometer is stuck


Typically on a Yukon instrument cluster this is caused by failing stepper motors on the cluster's circuit board, it can be fixed though. Check out this page for more about Yukon speedometer problems and how to get it fixed - Yukon speedometer fix

Dec 18, 2008 | 2005 GMC Yukon

Not finding what you are looking for?
1995 Chevrolet K1500 Logo

Related Topics:

49 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...