Question about 1992 Acura Integra Hatchback

1 Answer

Emergency brake on 92 Acura Integra sometimes sticks even when

The handle is released, resulting in warped rotors, etc. We have changed one caliper and the pads on both sides, had the rotors turned, but for some reason, the calipers will not always release from the rotor.  We have been told that this is a problem common to Acura Integras of this vintage, but there must  be a solution other than not using the e-brake.  The ebrake cable is operating fine, and sometimes the left rear caliper sticks but not the right.

Posted by on

  • deangolby Feb 05, 2009

    Are there no brake experts out there?   

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 124 Answers

Take the caliper apart and grease the Slide pins. There are two of them. When these get dried out it cause them to stick and not release the brake. When you pull the two halves of the caliper apart there will probably be dust in there. Clean it out and grease them up.

Posted on Mar 28, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 92 Acura Integra is not starting could it be my transmission fluid level


Search Results

    "No start" Due to Failed Fuel Pump Relay : Acura Integra ...

    repairpal.com > Problems > Acura > Integra
    where is the fuel system relay located at?I have replaced the distributer 2 times and also the... 1992 Acura Integra. fuel pump???? The car does not start unless I ...

    92 Integra wont start! Very weirdo problemo... - Honda-Tech

    honda-tech.com/acura-integra.../92-integra-wont-start-very-weirdo-probl...
    Jun 13, 2012 - Re: 92 Integra wont start! Very weirdo problemo ..... 91 Integra LS Defroster/Water Leaking, Bigmo5328, Acura Integra, 8, 01-30-2014 12:14 PM.

    92 DA9 WILL NOT START!!! - Team Integra Forums - Team Integra

    www.team-integra.net > ... > Generation Specific > Generation Two

    Apr 5, 2010 - 11 posts - ‎9 authors
    I just bought a 92 integra with the B18A1. The guy I ... Team-Integra.net is the premierAcura Integra Forum on the internet. ... But it still won't start and I don't know what is up. .... Engine will not rotate when attempting to start 98 gsr cranks but won't start. - Team Integra Forums ...
    10 posts
    Feb 9, 2012
    1992 Acura Integra NO SPARK! - Team Integra Forums ...
    15 posts
    Feb 5, 2012
    92 integra wont start after driving - Team Integra ...
    15 posts
    Oct 17, 2010
    Car wont start! has fuel but lil spark..? - Team Integra ...
    15 posts
    Dec 1, 2008
    More results from www.team-integra.net

    My '92 Integra cranks but does not s

Jan 21, 2016 | Acura Cars & Trucks

1 Answer

The brakepetal pusis bak when i stepp on the brake and wiberates. Sometimes it gets wery hard to brake.


It can be issue with master cylinder or the problem is there is still some air there in the system that has to be bleed. Or else the parts replaced are not aligned properly/.I suggest everything back.


There are few help links mentioned below to troubleshoot the issue.


Click the link below and follow its procedure: -----


All types of brake problems and repairs http://howtobyme.blogspot.com/2011/11/abs-and-service-light-comes-on.html

----------
Brake Fade Issue? http://whoisbyme.blogspot.in/2012/07/brake-fade-issue.html

-----------
Brake System Troubleshooting? http://technoanswers.blogspot.com/2011/11/brake-system-troubleshooting.html

----------
Car Brake lines have no pressure? http://schematicsdiagram.blogspot.com/2011/12/car-brake-lines-have-no-pressure.html

------------
Car Brakes Dragging? http://repairhelpcenter.blogspot.com/2011/12/car-brakes-dragging.html

-------------
Car Brakes grabbing? http://repairhelpcenter.blogspot.com/2011/12/car-brakes-grabbing.html

-----------
Car Brakes Making Noise? http://repairhelpcenter.blogspot.com/2011/12/car-brakes-making-noise.html

-------------
Car Brakes Pulling? http://repairhelpcenter.blogspot.com/2011/12/car-brakes-pulling.html

----------
Pulsating Brake Pedal? http://repairhelpcenter.blogspot.com/2011/12/pulsating-brake-pedal.html

---------
Spongy brake pedal? http://repairhelpcenter.blogspot.com/2011/12/spongy-brake-pedal.html

----------
Hard Brake Pedal? http://repairhelpcenter.blogspot.com/2011/12/hard-brake-pedal.html

------------
Fading Sinking Brake pedal?

http://whoisbyme.blogspot.in/2012/06/fading-sinking-brake-pedal.html

-------------
Feels Like Brake pedal Pulsating http://repairhelpcenter.blogspot.in/2012/06/feels-like-brake-pedal-pulsating.html

-------------
What is Brake Drum Bar? http://repairhelpcenter.blogspot.in/2012/02/what-is-brake-drum-bar.html

------------
ABS light stays on but brakes work fine?

http://howtobyme.blogspot.com/2011/11/abs-light-stays-on-but-brakes-work-fine.html

-----------
Vibrations while braking On Chevrolet Van? http://technoanswers.blogspot.in/2012/04/vibrations-while-braking-on-chevrolet.html

-----------
Dragging brakes? http://howtobyme.blogspot.in/2012/03/dragging-brakes.html

------------
Brake pedal stuck? http://howtobyme.blogspot.in/2012/03/brake-pedal-stuck.html

-----------
After replacing brake rotors and pads, brake pedal remains on floor? http://technoanswers.blogspot.in/2012/02/after-replacing-brake-rotors-and-pads.html

----------
How to replace Brake Power Booster? http://repairhelpcenter.blogspot.in/2012/02/how-to-replace-brake-power-booster.html

-----------
1997 Chevy Tahoe Brake lights not working? http://technoanswers.blogspot.in/2012/02/1997-chevy-tahoe-brake-lights-not.html

------------
How to service Drum brakes? http://repairhelpcenter.blogspot.in/2012/02/how-to-service-drum-brakes.html

-----------
What type of problems usually noticed on Drum brakes? http://repairhelpcenter.blogspot.in/2012/02/what-type-of-problems-usually-noticed.html

----------
How to test Drum Brakes? http://repairhelpcenter.blogspot.in/2012/02/how-to-test-drum-brakes.html

---------
Brake Bleeder Screw Function? http://repairhelpcenter.blogspot.in/2012/02/brake-bleeder-screw-function.html

---------
Toyota Tundra: Parts diagram to replace Brake Drums?

http://technoanswers.blogspot.in/2012/06/toyota-tundra-parts-diagram-to-replace.html
---------- Squeak and grinding sound is heard when brakes are applied?

http://technoanswers.blogspot.in/2012/02/squeak-and-grinding-sound-is-heard-when.html

------------

Brake Pads Inspection on Acura Integra?

http://repairhelpcenter.blogspot.in/2011/11/brake-pads-inspection-on-acura-integra.html

-------------

How to remove Brake Pads on Acura Integra?

http://repairhelpcenter.blogspot.in/2011/11/how-to-remove-brake-pads-on-acura.html

--------------

How to remove Brake Disc Rotor on Acura Integra?

http://repairhelpcenter.blogspot.in/2011/11/how-to-remove-brake-disc-rotor-on-acura.html

------------

Brake Caliper OVERHAUL on Acura Integra?

http://repairhelpcenter.blogspot.in/2011/11/brake-caliper-overhaul-on-acura-integra.html

------------

How to remove Brake Caliper on Acura Integra?

http://repairhelpcenter.blogspot.in/2011/11/how-to-remove-brake-caliper-on-acura.html

------------

How to remove Parking Brake shoes on Acura Integra?

http://repairhelpcenter.blogspot.in/2011/11/how-to-remove-parking-brake-shoes-on.html

-----------

How to remove Parking Brake Cable on Acura Integra?

http://repairhelpcenter.blogspot.in/2011/11/how-to-remove-parking-brake-cable-on.html

-------------
Brake pedal is pulsating and vibrating? http://repairhelpcenter.blogspot.com/2012/01/brake-pedal-is-pulsating-and-vibrating.html

----------
2002 Ford Windstar: Brake Warning Light ON dash?

http://schematicsdiagram.blogspot.in/2012/06/2002-ford-windstar-brake-warning-light.html

-----------

These details will help.

Thanks.

Nov 26, 2012 | Toyota Cars & Trucks

2 Answers

Why is brake warning light is on


It can be issue with master cylinder or the problem is there is still some air there in the system,that has to be bleed.Or else the parts replaced are not aligned properly/.I suggest everything back.


There are few help links mentioned below to troubleshoot the issue.


Click the link below and follow its procedure:-----


2002 Ford Windstar: Brake Warning Light ON dash?

http://schematicsdiagram.blogspot.in/2012/06/2002-ford-windstar-brake-warning-light.html

-----------


Battery and brake Warning lights on Dash
http://alltypesofpartsreplacing.blogspot.com/2012/10/battery-and-brake-warning-lights-on-dash.html
-----------
ABS & Brake warning lights remains steady on dash? http://schematicsdiagram.blogspot.com/2011/12/abs-brake-warning-lights-remains-steady.html
------------


Brake warning light comes on and car will not start intermittently? http://repairhelpcenter.blogspot.com/2011/12/brake-warning-light-comes-on-and-car.html
------------ When the car stops, abs pump turns ON? http://howtobyme.blogspot.com/2011/12/when-car-stopsabs-pump-turns-on.html
----------- Where is Power Brake Booster located on 1995 Lincoln Town Car? http://howtobyme.blogspot.com/2011/12/where-is-power-brake-booster-located-on.html
----------- Sometimes ABS light comes on while Driving?


http://howtobyme.blogspot.com/2011/12/sometimes-abs-light-comes-on-while.html
-----------


All types of brake problems and repairs http://howtobyme.blogspot.com/2011/11/abs-and-service-light-comes-on.html

----------
Brake Fade Issue? http://whoisbyme.blogspot.in/2012/07/brake-fade-issue.html

-----------
Brake System Troubleshooting? http://technoanswers.blogspot.com/2011/11/brake-system-troubleshooting.html

----------
Car Brake lines have no pressure? http://schematicsdiagram.blogspot.com/2011/12/car-brake-lines-have-no-pressure.html

------------
Car Brakes Dragging? http://repairhelpcenter.blogspot.com/2011/12/car-brakes-dragging.html

-------------
Car Brakes grabbing? http://repairhelpcenter.blogspot.com/2011/12/car-brakes-grabbing.html

-----------
Car Brakes Making Noise? http://repairhelpcenter.blogspot.com/2011/12/car-brakes-making-noise.html

-------------
Car Brakes Pulling? http://repairhelpcenter.blogspot.com/2011/12/car-brakes-pulling.html

----------
Pulsating Brake Pedal? http://repairhelpcenter.blogspot.com/2011/12/pulsating-brake-pedal.html

---------
Spongy brake pedal? http://repairhelpcenter.blogspot.com/2011/12/spongy-brake-pedal.html

----------
Hard Brake Pedal? http://repairhelpcenter.blogspot.com/2011/12/hard-brake-pedal.html

------------
Fading Sinking Brake pedal?

http://whoisbyme.blogspot.in/2012/06/fading-sinking-brake-pedal.html

-------------
Feels Like Brake pedal Pulsating http://repairhelpcenter.blogspot.in/2012/06/feels-like-brake-pedal-pulsating.html

-------------
What is Brake Drum Bar? http://repairhelpcenter.blogspot.in/2012/02/what-is-brake-drum-bar.html

------------
ABS light stays on but brakes work fine?

http://howtobyme.blogspot.com/2011/11/abs-light-stays-on-but-brakes-work-fine.html

-----------
Vibrations while braking On Chevrolet Van? http://technoanswers.blogspot.in/2012/04/vibrations-while-braking-on-chevrolet.html

-----------
Dragging brakes? http://howtobyme.blogspot.in/2012/03/dragging-brakes.html

------------
Brake pedal stuck? http://howtobyme.blogspot.in/2012/03/brake-pedal-stuck.html

-----------
After replacing brake rotors and pads, brake pedal remains on floor? http://technoanswers.blogspot.in/2012/02/after-replacing-brake-rotors-and-pads.html

----------
How to replace Brake Power Booster? http://repairhelpcenter.blogspot.in/2012/02/how-to-replace-brake-power-booster.html

-----------
1997 Chevy Tahoe Brake lights not working? http://technoanswers.blogspot.in/2012/02/1997-chevy-tahoe-brake-lights-not.html

------------
How to service Drum brakes? http://repairhelpcenter.blogspot.in/2012/02/how-to-service-drum-brakes.html

-----------
What type of problems usually noticed on Drum brakes? http://repairhelpcenter.blogspot.in/2012/02/what-type-of-problems-usually-noticed.html

----------
How to test Drum Brakes? http://repairhelpcenter.blogspot.in/2012/02/how-to-test-drum-brakes.html

---------
Brake Bleeder Screw Function? http://repairhelpcenter.blogspot.in/2012/02/brake-bleeder-screw-function.html

---------
Toyota Tundra: Parts diagram to replace Brake Drums?

http://technoanswers.blogspot.in/2012/06/toyota-tundra-parts-diagram-to-replace.html
---------- Squeak and grinding sound is heard when brakes are applied?

http://technoanswers.blogspot.in/2012/02/squeak-and-grinding-sound-is-heard-when.html

------------

Brake Pads Inspection on Acura Integra?

http://repairhelpcenter.blogspot.in/2011/11/brake-pads-inspection-on-acura-integra.html

-------------

How to remove Brake Pads on Acura Integra?

http://repairhelpcenter.blogspot.in/2011/11/how-to-remove-brake-pads-on-acura.html

--------------

How to remove Brake Disc Rotor on Acura Integra?

http://repairhelpcenter.blogspot.in/2011/11/how-to-remove-brake-disc-rotor-on-acura.html

------------

Brake Caliper OVERHAUL on Acura Integra?

http://repairhelpcenter.blogspot.in/2011/11/brake-caliper-overhaul-on-acura-integra.html

------------

How to remove Brake Caliper on Acura Integra?

http://repairhelpcenter.blogspot.in/2011/11/how-to-remove-brake-caliper-on-acura.html

------------

How to remove Parking Brake shoes on Acura Integra?

http://repairhelpcenter.blogspot.in/2011/11/how-to-remove-parking-brake-shoes-on.html

-----------

How to remove Parking Brake Cable on Acura Integra?

http://repairhelpcenter.blogspot.in/2011/11/how-to-remove-parking-brake-cable-on.html

-------------
Brake pedal is pulsating and vibrating? http://repairhelpcenter.blogspot.com/2012/01/brake-pedal-is-pulsating-and-vibrating.html

----------

These details will help.

Nov 23, 2012 | 2004 Ford Expedition

1 Answer

Frt brake rotors go out of balance with in 7 weeks after replacing rotors and pads, has happened 5 times.I have replaced the rotors 3 times and have turned the rotors the other times, how to fix frt...


I presume that you mean that they warp. There is nothing about rotors that could cause them to go out of balance, and even if they did, you would not notice it because the diameter and resulting inertia of a rotor is relatively small on the wheel assembly.
This car has four piston front calipers. When you work on the brakes, are any of the pistons more difficult to press back than the others? A sticking piston will press on the hot rotor after you park the car. The pressure and uneven cooling can warp it. Most folks these days buy rebuilt calipers rather than rebuilding their own. Mass production rebuilders can rebuild calipers more efficiently and better then you can, but if you buy rebuilt calipers, visually check them to make sure that the rebuilder did not mis-match the two halves of the caliper (i.e. bolt two outside halves together) as this is possible to do and has been known to happen. If this is done, only one half of the caliper will work.
If the front pads are not wearing evenly, it can be caused by a sticking piston, but also remember that both brake fluid circuits feed each of the front calipers. If one circuit is not working well due to a failing master cylinder or a loose rear wheel bearing, it is hard on the front rotors and may contribute to warping. Loose rear wheel bearings have the same effect on brakes that loose front wheel bearings have, if the rotor has excessive lateral movement due to the loose bearing, it forces the pistons far back into the caliper, so the master cylinder has to move a lot of fluid on that circuit before the brakes start to engage.
Finally, rotors that are poorly made from non-homogeneous metal will tend to warp as they heat and cool. For the bargain conscious, I have had good luck with Mexican-made Brembos. They rust like crazy, but they are reasonably priced and I have used them for years on several of my cars and have never had one warp yet.

Jul 09, 2011 | 1993 Volvo 240

1 Answer

WANT TO KNOW HOW TO CHANG ROTORS ON 2000 ACURA INTEGRA GSR


TO CHANGE FRONT BRAKE ROTORS. FIRST YOU NEED TO SAFELY RAISE SUPPORT VECHICLE ON JACK STANDS.MAKE SURE VECHICLE PARKED ON LEVEL SOLID GROUND.YOU NEED TO REMOVE BRAKE CALIPER BOLTS AND THE CALIPER FROM THE KNUCKLE.DONT LET CALIPER HANG BY BRAKE HOSE USE A PIECE OF WIRE TO SUPPORT CALIPER.REMOVE THE DISC BRAKE ROTOR RETAINING SCREWS IF EQUIPPED.IF THE ROTOR WILL NOT EASILY PULL OFF,SCREW TWO 8MM BOLTS INTO THE DISC BRAKE REMOVAL HOLES AND TURN THE BOLTS TWO TURNS AT A TIME TO PRESS THE ROTOR FROM THE HUB.

Mar 19, 2011 | 1996 Acura TL Series

1 Answer

Good afternoon, I have a Skoda Fabia Combi 1.4 TDI...


It can be the wheel Hub bearings. The rotors if warped will wear out pads early. Bad calipers are another possibility as well as a bad Master cylinder.

If the Hub bearings are bad your tires will have cupping. If the tires are okay the rotors are warping from contact with the pads. The pads won't release if the calipers are jamming OR the Master Cylinder is keeping pressure to the calipers.

You can get a pressure check done on the Master cylinder to see if the pressure is releasing when your foot is off the brake. If the pressure is releasing then the calipers are probably sticking. Make sure to use new brake hardware and a lubricate for the hardware when you assemble the calipers.

May 16, 2010 | Cars & Trucks

1 Answer

Front brakes not releasing properly.


Sounds like the caliper needs replaced. Sometimes the pistons lock in the caliper and cause the brakes to drag. When the mechanic changed the brakes before, he pushed the pistons in all the way to accomodate the new brake pads. Now that they are wearing back down, it is getting to the warped spot in the caliper and starting to stick.

Jun 25, 2009 | 1998 Ford F150 Regular Cab

1 Answer

Brakes


drive the car apply slowly the emergency brake you gonna brake with the rear only if you fell the pulse its our rear drum that warp be carefull when applying the emergency try to hold the release handle at the same time if no pulse change our front rotor there nothing else that can pulse when you brake hope it help fixya our post thanks pierre

Jul 13, 2008 | 2000 Buick LeSabre

Not finding what you are looking for?
1992 Acura Integra Hatchback Logo

345 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acura Experts

yadayada
yadayada

Level 3 Expert

63291 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you an Acura Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...