Question about 1995 Buick LeSabre

2 Answers

Installing serpentine belt on buick lasabre 1995

I know you have to take off motor mount but what part to be able to install the serpentine belt

Posted by on

  • Anonymous May 03, 2009

    Do you really have to take off the motor mount to change the serpentine belt? Is there any other way?

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 1 Answer

Motor mount does not need to be removed. there is an idler pulley which can be lifted up using a socket and long bar. the belt relaxes and is easily removed and replaced.

Posted on Jun 30, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 840 Answers

Loosen up the alternator and you should be able to get it around and pull and tighten bolts on alternator

Posted on Jan 25, 2009

  • Marc Podeszek Jan 27, 2009

    Please rate my response. Thank you !

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do you replace the serpentine belt on a 1995 Buick century 4 cylinder?


This is the advertised procedure:

REMOVAL & INSTALLATION

Except Serpentine Belt
It may be necessary to loosen more than one pulley or remove another belt to access the drive belt, such as the power steering and air conditioning.
  1. Loosen the driven accessory's pivot and mounting bolts.
  2. Move the accessory toward or away from the engine until there is enough slack in the belt to slip it over the pulley of the driven accessory.
  3. Remove the belt from the engine.
  4. Install the new belt and move the accessory toward or away from the engine until the tension is correct. You can use a wooden hammer handle as a lever, but do not use anything metallic.
  5. Adjust the belt tension, then tighten the bolts.
Serpentine Belt
  1. Place a tool over the tensioner pulley axis bolt.
  2. Rotate the tool counterclockwise to relieve belt tension.
  3. Remove the drive belt.
  4. Carefully release the tensioner pulley and remove the tool.
To install:
  1. Route the belt over the pulleys, except tensioner.
  2. Place tool over tensioner, rotate counterclockwise and install belt.
  3. Remove the tool, then check alignment of tension and belt.
25367323-4c3ev5g3hggqhbcvosjrywtf-3-0.jpg

Jan 13, 2015 | 1995 Buick Century

1 Answer

How to change serpentine belt?


You will need to put a jack under the front of the engine then remove the motor mount. You should be able to remove the serpentine belt then and install the new one. Good Luck

Dec 27, 2010 | 1995 Buick LeSabre

1 Answer

How do I install a serpentine belt on 97 buick skylark? Do I remove motor mount?


Hello
Yes remove the motor mount.You need to have it supported with a floor jack first.

Here is a step by step link to help guide you.

Good luck
http://www.wikihow.com/Change-a-Serpentine-Belt-on-a-1997-Buick-Skylark

Dec 08, 2010 | 1997 Buick Skylark

1 Answer

Replacing serpentine accessory belt. Is it necessary to remove motor mounting brace to remove and install new serpentine belt?


From my understanding I think you have to remove the motor mount and mount the engine to remove it because I have been asking different mechanics about the serpintine belt on my 1998 Buick Lasabre.

Nov 28, 2010 | 1998 Buick LeSabre

1 Answer

Serpentine belt replacement


need to see diagram for serpentine belt installation on 19991 buick lasabre

Dec 27, 2009 | 1996 Buick Riviera

3 Answers

I have a 95 Buick LeSabre and it recently started vibrating when I accelerate. I started only happening when i got to about 50 MPH but has steadily gotten worse. If I let off the accelerator it stops....


check the tires for separations or bulges in the tread face also check the drive axles see if the boots are torn or missing all together,also be sure to check the ball joints and tie rod ends.

Dec 26, 2009 | Buick LeSabre Cars & Trucks

1 Answer

Diagram for 1998 buick lasabre serpentine belt


I found the diagram in my owner's manual.
I replaced the belt on mine just 2 days ago. All you need to do is remove one bolt from the lower motor mount and remove the spacer. After you relieve the belt tensioner, the belt will slip right through the gap. Don't forget to support the engine before removing the bolt. As a backup I took a photo of the belt with my digital camera beforehand... just in case.

Sep 05, 2009 | 1998 Buick LeSabre

1 Answer

1995 buick rivera serpentine belt install?


look around under the hood , on the underside of the hood, sometimes the belt routing diagram is on a sticker also check a Chiltons Manual sold at auto pARTS STOReS or on the web

Jun 12, 2009 | 1997 Buick Riviera

1 Answer

Trying to insall serpentine belt on buick lasabre


Here it goes. Start at power steering pump top. Go to right (beneath the tensioner). Then to right, on top of alternator. From there right to wrap around the ac clutch. Here is where it can get confusing. Going back left (above motor mount) on top of water pump pulley. As you wrap around pulley, it makes a really tight squeeze between motor mount and main drive pulley. Once around the main drive, back up to power steering pump. The motor mount does not even have to be disconnected (my fear). I hope this helps.

Jan 25, 2009 | 1993 Buick LeSabre

Not finding what you are looking for?
1995 Buick LeSabre Logo

477 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6880 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...