Question about 1993 Buick LeSabre

1 Answer

Trying to insall serpentine belt on buick lasabre

Posted by on

  • Anonymous Jan 31, 2009

    i cant get the mount off to replace belt.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 2 Answers

Here it goes. Start at power steering pump top. Go to right (beneath the tensioner). Then to right, on top of alternator. From there right to wrap around the ac clutch. Here is where it can get confusing. Going back left (above motor mount) on top of water pump pulley. As you wrap around pulley, it makes a really tight squeeze between motor mount and main drive pulley. Once around the main drive, back up to power steering pump. The motor mount does not even have to be disconnected (my fear). I hope this helps.

Posted on Feb 19, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I put on a serpentine belt for a buick 2001, LaSabre?


should be picture on inside of hood or near the radiator

Aug 18, 2015 | Buick Cars & Trucks

1 Answer

How do Iput a serpentine belt on a 1997 buick lasabre but cant release tension pulley?


  • There is a bolt and spacer on the lower side of the engine mount housing that needs to be removed and the belt will the go right on. If you are pulling the serpentine wrench one way to no avail try pulling it the other way.

Regards, Tony

May 27, 2011 | Chevrolet Celebrity Cars & Trucks

1 Answer

Replacing serpentine accessory belt. Is it necessary to remove motor mounting brace to remove and install new serpentine belt?


From my understanding I think you have to remove the motor mount and mount the engine to remove it because I have been asking different mechanics about the serpintine belt on my 1998 Buick Lasabre.

Nov 28, 2010 | 1998 Buick LeSabre

1 Answer

I want a diagram of a serpentine belt for a 97 buick lasabre


The Belt Diagram should be on the underside of your hood, however they have a way of disappearing.

If it is not there:
Click on the following free direct Link. It has the correct Serpentine and Drive Belt Diagrams for your 1997 Buick LeSabre 3.8L V6-Cylinder Engine with the different Engine Options (AC/No AC etc.).

Let me know if this helped, or if you have additional information questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/1997/make/buick/model/lesabre/1997_buick_lesabre_drive_belt_routing_diagram.htm

Apr 02, 2010 | 1997 Buick LeSabre

1 Answer

Diagram of 1997 buick lasabre serpentine belt Trying to replace belt but dont have an owner's manual!!


The diagram should be on a sticker somewhere in the engine bay (check upper radiator supports, underside of the hood, plastic panels, strut towers, anything) it will be there unless the sticker is damaged or removed. 

Hope this helps!
Joe

Feb 26, 2010 | 1997 Buick LeSabre

1 Answer

Serpentine belt replacement


need to see diagram for serpentine belt installation on 19991 buick lasabre

Dec 27, 2009 | 1996 Buick Riviera

1 Answer

Diagram for 1998 buick lasabre serpentine belt


I found the diagram in my owner's manual.
I replaced the belt on mine just 2 days ago. All you need to do is remove one bolt from the lower motor mount and remove the spacer. After you relieve the belt tensioner, the belt will slip right through the gap. Don't forget to support the engine before removing the bolt. As a backup I took a photo of the belt with my digital camera beforehand... just in case.

Sep 05, 2009 | 1998 Buick LeSabre

2 Answers

Installing serpentine belt on buick lasabre 1995


motor mount does not need to be removed. there is an idler pulley which can be lifted up using a socket and long bar. the belt relaxes and is easily removed and replaced.

Jan 25, 2009 | 1995 Buick LeSabre

1 Answer

I need to see the routing of the serpentine belt on 2002 Lasabre limited


Go to this site..http://www.2carpros.com/car_repair_information/tec_info/2002/buick/lesabre/2002_buick_lesabre_drive_belt_routing_diagram.htm

Dec 17, 2008 | 2002 Buick LeSabre

Not finding what you are looking for?
1993 Buick LeSabre Logo

276 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6878 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...