Question about 1965 Ford Mustang

1 Answer

Putting together the 3 bows for convertible top

I am restoring a 1965 mustang convertible and I need help, instructions,
that shows how to put it together.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 136 Answers

Do yourself and your Mustang convertible a favor. Have the top professionally installed. The bows are position sensitive and require adjustment so the top fabric is stretched just right. I had a 66 drop top that needed just fabric and I still paid a pro to do it.

Posted on Mar 19, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i set distributor timing for a 1965 ford mustang


you need to find the tdc on compression cylinder number one and poin dist rotor to face cylinder one on the cap

Sep 21, 2014 | 1965 Ford Mustang

1 Answer

1965 mustang the car starts and runs but when put into reverse or drive the car stalls this happened after i canged the spark plugs and replace all the wiring, i dont have very much experince on mustangs...


if automatic, look for vacuum hose damage/leaks or loose wires that may have come off during the work you did. Is the distributor a vacuum advance and are timing/ points set correctly?

Oct 03, 2010 | 1965 Ford Mustang

1 Answer

Where can I find schematics on putting the glass back into the doors of a 1965 mustang gt?


You won't find a schematic but you can find pictures and instructions in some of the classic Mustang parts catalogs or on Mustang web sites and forums. If you disassemble anything else, take some photos and write down the steps. Bag and label the hardware.That way you can reverse the steps and look at the pretty pictures and get it installed correctly the first time.
Of course, if the rear glass was out when you got the car, you'll have to do a little web searching and order some parts catalogs (most are free). Good luck...I still have the doors to do on my '65 so I can't really tell you the exact steps needed.

Aug 14, 2010 | 1965 Ford Mustang

3 Answers

How do you put down the top on a ford 1998 mustang convertible


Make sure the parking brake is engaged first. Then just push the button next to the parjing brake.

Mar 27, 2010 | 1998 Ford Mustang

1 Answer

Rearside window on my 65 convertible won't go down.


Remove inner panel. You probably have a defective regulator assembly. If glass has jumped track, you may be able to put it back. Remember it didn't jump track because it felt like it. There's a reason - your job is to find it. Replacements can be ordered from any number of places. Google Mustang Parts. I like CJ Pony Parts but there's a ton of them.

Jan 15, 2010 | 1965 Ford Mustang

1 Answer

Explain how to remove back ashtrays from 1965


usually you press down on the part where you put out the cigarette on.

Dec 16, 2009 | 1965 Ford Mustang

1 Answer

89 ford mustang convertible


This is a professional job for a conv. top shop. has to be sewn in at the bottom.

Removal
NOTE: Mark vinyl to be removed so it can be returned to the same position after disassembly.
  1. Remove sail area panels as outlined.
  1. Remove staples retaining elastic straps at each side of back window glass (42006) to rear tacking strip and folding top rear number 4 bow (51278) and remove elastic straps.
  1. Remove staples retaining rear bow corner pad (537A71) and bottom of folding top back window curtain (52500) to rear tacking strips.
  1. Remove staples retaining top of folding top back window curtain to folding top rear number 4 bow and remove back window glass .
1994 mustang. don't have 89 Window, Rear Installation
NOTE: Transfer markings from the removed assembly.
  1. Mark with grease pencil center point on folding top rear number 4 bow in line with hole on rear of folding top rear number 4 bow .

Oct 07, 2008 | 1989 Ford Mustang

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

293 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

60867 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...