Question about 1996 Ford Thunderbird LX

1 Answer

How do you replace power window motor on a 1996 thunderbird?

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Ford Master
  • 443 Answers

Get to it and remove the door panel start at bottom popping the door panel loose with a flat blade working up both sides and remove screws in door handles some are hidden when all loose raise up on the door panel to release. then you will remove the plastic on the door and see the motor . it is rivited in so you will need a drill and some new rivets for replacement/

Posted on Jan 26, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

1996 ford thunderbird driver window is stuck down?

check fuses and the motor for power getting to it. Test the switch

Aug 01, 2015 | Ford Cars & Trucks

1 Answer

Window up or down when replacing window motor

Tape the window up after unbolting it from the regulator. Blue painters tape is best.

Oct 22, 2013 | 1996 Ford Thunderbird LX

1 Answer

When replacing window motor, window up or down.

Replacing only the motor does not metter.Replacing the coil also will show u the right position.Anyway,the distance does not metter as it stop from the overload curse end.

Oct 22, 2013 | 1996 Ford Thunderbird LX

1 Answer

96 thunderbird. electric widows motor works but windows won't move

The motor is still runs but is about to go out, it no longer has the power it needs..replace the motor, or the entire motor regulator assembly and you will be fine.

Dec 03, 2012 | 1996 Ford Thunderbird LX

1 Answer

2002 thunderbird window won't go up or down replace swith still wont work fuse are ok does the switch get power

The master switch connector does have circuits that have power on them. The Master switch is not directly connected to the window motors. The switch sends a signal to the Front Electronic Module and the module controls operation of the motor on the driver side. The passenger door window motor is controlled by a different module

Nov 28, 2012 | 2002 Ford Thunderbird

1 Answer

How to replace power motor gear?

Get a different motor from a auto wrecker, The gear is not replaceable

Nov 11, 2012 | 1996 Ford Thunderbird LX

1 Answer

96on both-sides. Windows are on track. Ford T-Bird power windows will not work. The motors run

check the switch does it have power going threw it , is there power going to it ? check the main one first that the drivers door!

Sep 12, 2012 | 1996 Ford Thunderbird LX

1 Answer

96 ford thunderbird power windows


Apr 11, 2012 | 1996 Ford Thunderbird LX

1 Answer

How to replace a blower motor in a 1996 ford thunderbird lx

  1. Remove the glove compartment liner to gain access to the heater blower motor and blower motor wheel assembly mounting screws.
  1. Use a small screwdriver to remove clip retaining hydraulic damper strut.
  1. Remove four screws and remove the heater blower motor assembly and blower motor wheel assembly from the heater blower motor housing.
  1. Using a new seal, position the heater blower motor and blower motor wheel assembly to the heater blower motor housing with the flat side of the flange near the heater blower motor switch resistor (18591). Install the four retaining screws.
  1. Tape the heater blower motor power lead to the air inlet duct to keep the wire away from the blower outlet during installation.
  1. Install the heater blower motor and blower motor wheel assembly in the vehicle.
  1. Install the glove compartment liner.

Oct 07, 2010 | 1996 Ford Thunderbird LX

1 Answer

How do you remove the door panel in a 1996 thunderbird to replace the speaker?

use a flat head screwdriver and pop it off where it meets the door. Be careful when it comes loose. If it falls it can rip the wires from the power windows and locks.

May 13, 2010 | 1996 Ford Thunderbird LX

Not finding what you are looking for?
1996 Ford Thunderbird LX Logo

710 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

78267 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers


Level 3 Expert

5655 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides