Question about Chevrolet Aveo

Open Question

05 aveo dash, interior and tail light not working???

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 333 Answers

SOURCE: rear brake lights wont work on our 2005 chevy aveo ????

It sounds like you should check for power at brake pedal switch. Hook up a test light to the switch and press the brake pedal. If the light does not go on and you have power in the wires to the switch then the switch should be replaced.
I hope this helps you out

Posted on Nov 24, 2008

jyackle5
  • 8197 Answers

SOURCE: No tail or running lights

Have you looked at the relays under the hood One of thim have something to do with the lights.

Posted on Jan 21, 2009

adnanbhatti
  • 1188 Answers

SOURCE: headlights and door locks not working

Fuse is probably blown out. Replace fuses for respective functions. Find the fuse box: might be in engine near battery or below steering wheel. open top and check for blown fuses. Try replacing if blown fuses are found. If all fuses are OK then it is very unlikely that all the bulbs are blown.

Posted on Jul 23, 2009

  • 52 Answers

SOURCE: 05 aveo lights flicker in and out on tail lights and dash both

def a short ...check all wires leading to lights ....

Posted on Jul 25, 2009

  • 563 Answers

SOURCE: Interior light bulb replacement in an 05 Audi A4

Look for a small-cut like recess on the sides of the bulb-housing.
Put a flat-end screw-driver to that recess and twist off.
If that don't seem to work, insert the screw-driver to the base of he bulb-housing and pry it off with a gentle but firm twist.

Posted on Dec 06, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1984 Chevy Suburban tail lights not working


Check the tail light bulbs, check to make sure the dash lighting switch is turned up but not turned so far up that the interior lights come on when the door is closed.

Jul 22, 2017 | Chevrolet Suburban Cars & Trucks

3 Answers

Dash and interior lights do not work


Dash lights are on the same fuse as the tail lights. Dash lights not working is an indication that the tail lights are not working. The first thing to check is that the tail light fuse is not blown. Most of the time replacing the tail light fuse will restore both the tail lights and the dash/interior lights. If this is not the case you may have to trace the wires and look for a broken or unplugged wire in the harness.

Nov 18, 2011 | 1994 Nissan Quest

1 Answer

I HAVE A SHORT SOMEWHERE AND ITS EFFECTING THE DASH LIGHTS WHEREAS THE DASH IS COMPLETELY OUT AND ITS NOT EFFECTING MY INTERIOR LIGHTS AT ALL. SOMEONE HELP?


Hello: Are your tail lights working? If not check the tail light fuse. Fuse box under hood on passenger side. Fuse location and identification on the inside of the cover.

Feb 21, 2011 | 2000 Buick Century

2 Answers

Interior dash and running lights dont work but my signal and brake lights work else works


Look at fuse #18, a 15 amp fuse, in the fuse block. This fuse powers both the tail lights and instrument cluster lights. Usually both of these light systems are powered by the same fuse so when your cluster isn't lit up you'll know right away that your tail lights aren't working as it's not safe to drive without tail lights. Your brake, turn, and head lamps are powered by different circuits. Hope this helps and good luck!

Aug 11, 2010 | 1997 Dodge Ram 1500 Club Cab

1 Answer

The light in my dash went out and I cant find the fuse to get it back working. Which one is it?


fuse panel cover should name each circuit fuse. for example; "tail lights 20A, or interior lights 15A or instrument cluster15A" also, you can look in owners manual for schematic of fuse panel. if all fuses are good, your dash light is out. dash light is generally in the tail light circuit.

Jan 09, 2010 | 2000 GMC Jimmy

1 Answer

Interior dash out, tail lights and running light out, is this a fuse? where is it? Signals and brake lights work but blow fuses when it rains


No interior dash lights and no tail lights on a GM usually means it's time for a new headlight switch. To check the fuse, it's in the middle of the fuse box marked instrument cluster. If the fuse is good, buy the switch. Lights blowing fuses means you either have a bare wire running down the driver's side of the truck or up into the tail light assemblies. There is also a plug in under the box on the driver's side near the bumper that may be getting wet. Hope this helps.

Oct 11, 2009 | 1986 GMC C3500

1 Answer

05 aveo lights flicker in and out on tail lights and dash both


def a short ...check all wires leading to lights ....

Jul 24, 2009 | 2005 Chevrolet Aveo

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...