Question about 2001 Chrysler PT Cruiser

1 Answer

CHANGING ENGINE 2001 PT CRUISER 2.4 -- NEED ANOTHER ENGINE , HAS ANYONE DONE THIS?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    New Friend:

    An expert that has 1 follower.

  • Expert
  • 161 Answers

I wouldnt even attempt it.....its a front wheel drive car and its really tight underneath the hoods of those. basically a pain in the ***.

Posted on Feb 11, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How many quarts of transmission fluid does it take for 2001 pt cruiser


when changing fluid and filter between 8 & 12 quarts check lvl after 6 then keep adding and checking till up to the bottom mark on stick, fill with engine off and check with engine running and in park

Jan 22, 2015 | 2001 Chrysler PT Cruiser

1 Answer

My 2001 PT Cruiser is overheating. I took it to the dealership and they said I needed a new fan. I replaced the fan and it's still overheating. Does anyone know why?


They did not do there job, they should of block check the engine also what about the radiator is it plugged or the waterpump they fail on the inside as the propellor is plastic. Becareful your engine can blow a head gasket blows easy

May 23, 2011 | 2001 Chrysler PT Cruiser

1 Answer

2001 PT CRUISER MISFIRE CYLINDER 2


Do you know how check the engine codes? Turn the key 3 times and the codes will be displayed where the odometer number is displayed.
If the code is 302 it is spark plug mis fire.
It could be a bad fuel injector.

May 26, 2010 | 2001 Chrysler PT Cruiser

2 Answers

Timing belt replacement on a 2001 pt cruisre


Not for the beginner, I will be doing one on monday. 2001 Twin Cam.

I have been in repair for 30 years, I would not let anyone with less than 5 years experience touch it. This motor has the potential to bend valves if out of time between the cams and crank.

Changing the right side mount too. 10 hours according to the book (all data) and thats for someone that knows how.

Feb 28, 2010 | 2001 Chrysler PT Cruiser

1 Answer

Engine motor mounts on 2001 PT Cruiser


Place a block of wood under the engine sump to prevent damage when you jack up the engine to take the tension off the mount. Make sure you do not jack the engine up too much as you might damage the exhaust,cooling hoses etc.

Apr 07, 2009 | 2005 Chrysler PT Cruiser

1 Answer

Need to replace water pump in 2001 pt cruiser


This is a fairly large job and it should only be done by someone that has some experience with this engine. The fit is very tight in the PT Cruiser and will involve jacking the engine up and down and a lot of screwing around trying to get all of the engine cover bolts out etc.

I would not even attempt to do this job without a good manual.

It is best if you replace the timing belt, belt tensioner, and idler pulleys while the job is being done.

The water pump is in the front of the engine and is run off of the timing belt.

If you look online at this picture: http://img.neons.org/archives/99RTproject7.jpg you will see that it is on the bottom of the engine on the right.

Bring it to a reputable shop that backs their work as it is easy to make a mistake on this job.

Good luck.



Apr 01, 2009 | 2001 Chrysler PT Cruiser

1 Answer

2000 PT CRUISER


How about the MAF sensor?

Oct 18, 2008 | 2001 Chrysler PT Cruiser

Not finding what you are looking for?
2001 Chrysler PT Cruiser Logo

Related Topics:

93 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

60541 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21927 Answers

chargerhp
chargerhp

Level 3 Expert

813 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...