Question about 1999 Toyota Camry

1 Answer

Interior lights not working

Dome, console, control panel lights not working.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,990 Answers

Look under the Hood and see if there is a Fuse Relay Box. If so, There will be a Relay in here for "Illumination" Change this relay and check the other Fuses and the Fuses in the Panel inside the car with a Flashlight and see if they will not come on.

Posted on Jan 25, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Interior lights wont come on


What make , model an year vehicle ? Fuse's ? What interior lights ? Dome , instrument panel etc.... Depending on the year of vehicle a control module could be incharge of turning on the light's ! A BCM - body control module !

Mar 02, 2017 | Cars & Trucks

4 Answers

1995 Buick Century dome light stays on what causes this?


make sure light switch is turned off the full left position, if light is still on you probably have a bad door switch

Apr 13, 2014 | 1995 Buick Century

1 Answer

Interior lights not working


CHECK DOME LIGHTS.FAULTY SWITCH OF DOME LIGHTS IS ONE OF YHE PROBLEM U MAY HAVE.DOME LIGHTS DO NOT HAVE A SEPERATE FUSE.BCM CONTROLS THEM.IF U NEED MORE INFO LET ME KNOW

Apr 10, 2014 | 2009 Volkswagen CC

1 Answer

How do you turn off the interior lights in a 2006 buick lucerne? My aunt got one a few months ago, and the manual says that when you lock the doors, the interior lights will go off. They don't. Someti


Sounds like you need a new Body Control Module according to this.

Buick Lucerne CXL My 2007 buick Lucerne interior lights will

other info and manual

How to activate the "dome light" feature in your Buick or GMC - YouTube

? 1:07
https://www.youtube.com/watch?v=zrj6TQ9eF30
Jan 7, 2014 - Uploaded by Hall Buick GMC
This is a quick guide on how to turn your dome lights on and off. Many GM vehicle owners are unaware of ...

Dome Lamps :: Interior Lighting :: Lighting :: Buick Enclave Owners ...

www.buiclub.com/info-1752.html The dome lamps are located in the overhead console and above the rear seat passengers. The dome lamps come on when a door is opened, unless the dome lamp override button is pressed in. The lamps can also be turned on and off by turning the instrument panel brightness control clockwise to the farthest position.

[PDF]2006 Buick Lucerne Owner Manual M

https://cdn.dealereprocess.net/cdn/servicemanuals/buick/2006-lucerne.pdf indicate medium and one light indicates the lowest setting. When you press a button, the feature will turn on at the highest setting. Each time you press the button, the feature will decrease one temperature setting. To turn the feature off, keep pressing the button until the display lights turn off. If your vehicle has remote vehicle ...

How do you turn off the interior lights in 2006 buick lucerne Google Search

Dec 11, 2017 | 2006 Buick Lucerne

1 Answer

The interior lights on my father-in law's 2000 Safari are all inop (6 spots plus two dome lights) I can't find a fuse in the engine box for them. Is there another fuse box. The van has a dome overr


Does the van have remote keyless entry (RKE) system ?
Interior Lighting System Description
Vehicles with the optional remote keyless entry (RKE) system have interior lighting controlled by the body control module (BCM).
This vehicle uses a delayed interior lighting system.
The system functions as follows:
• The dome lamps will illuminate when any door is opened.
• The dome lamps will remain on for 20 seconds after the last door is closed.
• The delay is canceled and the dome lamps will go out when the ignition switch is turned to the ON position.
• The illuminated entry function will not operate when the dome lamp defeat switch is in the OFF position.
• The interior lighting system is protected from battery rundown by the retained accessory power (RAP) system. The RAP system functions by shutting down interior lights after 10 minutes (when ignition is OFF).

Interior Lights Circuit Description
When the interior lamps circuits are closed/enabled, the courtesy lamp relay is activated by the two following coil circuits:
• CKT 690 (GRY/BLK) which is the courtesy lamp enable output of the body control module (BCM) driving the coil side of the relay.
• CKT 1732 (ORN) which is the coil output side of the relay going to the potential grounding switches/sources.
When the courtesy lamp relay is enabled, CKT 156 (WHT) (courtesy lamp output) is enabled by the closed contact at the relay and then grounded by CKT 750 (BLK) at G110.
Some of these circuits can also be activated with the headlamp and panel dimmer switch. When this happens, the coil output side of the inadvertent power relay is grounded to the body control module (BCM) via CKT 1393 (DK BLU)
CKT 40 (ORN) from the courtesy fuse drives both input sides of the inadvertent power relay. When the contact is pulled closed, CKT 1732 (ORN) is supplied power, thus driving any lamps/circuits attached that circuit and providing ground.
The body control module (BCM) also monitors the following four door inputs:
• CKT 49 (DK BLU) -- LH door jamb switch input
• CKT 54 (ORN) -- RH door jamb switch input
• CKT 775 (PNK) -- Side door jamb switch input
• CKT 656 (YEL) -- Rear door jamb switch input/liftgate strut switch input (depending on option content)
When the doors are closed, the body control module (BCM) is in a floating state of 0-2 volts. When the doors are opened, the courtesy lamp relay is activated, sending power to the courtesy lamps.
The headlamp and panel dimmer switch also activates the following interior courtesy lamps when the switch is placed in the PARK or HEADLAMP ON positions:
• RF power window switch
• RH power door lock switch
• LH power window switch
• LH power door lock switch
• LH outside rearview mirror control switch
• Rear radio control head
The dome lamps can be disabled by closing the dome lamp defeat switch located on the headlamp and panel dimmer switch.

--------------------------------------------------------------------------------
Courtesy or Dome Lamps Inoperative
Step
Action
Value(s)
Yes
No
Important: Verify functional bulbs before beginning diagnostic procedure.
1
Did you perform the Lighting Diagnostic System Check?
--
YES - Go to Step 2
NO - Go to Diagnostic System Check - Lighting Systems
2
Are all of the courtesy/dome lamps inoperative?
--
YES - Go to Step 6
NO - Go to Step 3
3
Activate courtesy/dome lamps
With DMM, check for battery voltage from inoperative lamp CKT 1732 (ORN) to ground
Is battery voltage present?
B+
YES - Go to Step 4
NO - Go to Step 5
4
Repair open in CKT 156 (WHT) between inoperative lamp assemply and S214.
Is the repair complete?
--
NO - Go to Step 10
--
5
Repair open in CKT 1732 (ORN) between inoperative lamp assemply and one of the following splices:
• S258
• S301
Is the repair complete?
--
Go to Step 10
--
6
Turn the courtesy lamp switch to the ON position
Check for battery voltage at BCM C2 cavity B12.
Is battery voltage present?
B+
Go to Step 7
Go to Diagnostic System Check - Body Control System in Body Control Systems
7
Verify continuity of the following three circuits with DMM:
• CKT 1732 (ORN) between courtesy lamp relay and body control module
• CKT 156 (WHT) between courtesy lamp relay and S214
• CKT 750 (BLK) between courtesy lamp relay and S206
Are all of the circuits functional?
--
Go to Step 8
Go to Step 9
8
Replace courtesy lamp relay.
Is repair complete?
--
Go to Step 10
--
9
Repair the inoperative circuit.
Is the repair complete?
--
Go to Step 10
--
10
Operate the system in order to verify the repair.
Did you correct the condition?
--
System OK
Go to Step 2

Mar 01, 2018 | 2000 GMC Safari

1 Answer

Overhead console and interior lights not working


my 97 burban has a dome override button next to light switch that does the same things you discribed look for it and push it if you have one its labeled

Nov 15, 2009 | 1998 Chevrolet Blazer

1 Answer

Dome Light (switched circuit now working) Shorted it out


Why didn't you hook into the entertainment system (radio ) ?
The one that turns on when the door opens is controlled by the BCM -body control module .You probably shorted out the transistor in side the BCM .
These lamps may be manually turned on by placing the interior lamp switch in the ON position, or by opening a door.
• The Dome Lamp
• The Rear Compartment Courtesy Lamp
• The Rear View Mirror Map Lights
The inadvertent power control circuit of the BCM supplies battery positive voltage to the dome lamp and the map lamps. When any door is opened, the door jamb switch contacts close providing a door open input to the BCM. The BCM then provides a ground to the interior lamps. The interior lamps receive a ground at G401 or G403.
If the driver inadvertently leaves any interior lamp on the BCM will turn it off after a 20 minute time-out.
The courtesy lamps will normally turn off using the theater dimming feature. The BCM provides a pulse width modulated ground to the interior lamps for the theater dimming feature. The courtesy lamps will also turn off immediately if a door lock command is received with all the doors closed, or if the ignition switch is turned to the ON position.

--------------------------------------------------------------------------------
Dome Lamps Inoperative
ematic Reference: Interior Lights Schematics
DEFINITION: Only the dome lamp is inoperative.
1
Did you perform the Diagnostic System Check - Vehicle?
YES - Go to Step 2
NO - Go to Diagnostic System Check - Vehicle
2
Place the instrument panel (I/P) dimmer switch in the DOME position.
Does the dome lamp illuminate?
YES - Go to Testing for Intermittent Conditions and Poor Connections
NO - Go to Step 3
3
Disconnect the dome lamp assembly.
Probe the courtesy lamp supply voltage circuit with a test lamp that is connected to a good ground.
Does the test lamp illuminate?
YES - Go to Step 4
NO - Go to Step 6
4
Connect the test lamp between the courtesy lamp supply voltage circuit and the courtesy lamp low control circuit.
Does the test lamp illuminate?
YES - Go to Step 5
NO - Go to Step 7
5
Inspect for poor connections at the harness connector of the dome lamp assembly. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs .
Did you find and correct the condition?
YES - Go to Step 9
NO - Go to Step 8
6
Repair an open, high resistance, or short to ground in the courtesy lamp supply voltage circuit. Refer to Circuit Testing and Wiring Repairs .
YES - Did you complete the repair?
NO - Go to Step 9
--
7
Repair an open or high resistance in the courtesy lamp low control circuit. Refer to Circuit Testing and Wiring Repairs .
YES - Did you complete the repair?
NO - Go to Step 9
--
8
Replace the dome lamp assembly. Refer to Dome Lamp Replacement .
YES - Did you complete the replacement?
NO - Go to Step 9
--
9
Operate the system in order to verify the repair.
Did you correct the condition?
YES - System OK
NO - Go to Step 3

Mar 21, 2017 | 2007 Saturn ION-2 Quad Coupe

1 Answer

Interior lights won't turn off 1999 BuicK LeSabre.


yes there is a relay switch in engine compartment or under dash

Jan 25, 2009 | 2001 Buick LeSabre

1 Answer

Courtesy lights don't work


You will need to test the Body Control Module, it controls the lights.

Jul 03, 2008 | 1996 Dodge Caravan

Not finding what you are looking for?
1999 Toyota Camry Logo

166 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

78267 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8836 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...