Question about Dodge Ram 2500
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: priming fuel
You prime it at the lifter pump on the drivers side the primer is a black rubber push button type. you shouldn't have to crack any injector lines if you do you can risk damaging the lines or their ability to seal. good luck
Posted on Dec 06, 2008
fuel filter housing on driver side of motor. need the correct size of socket to remove the lid. unscrew lid and pull straight up to remove filter. remove old filter from lid and install new filter and seal. drain old fuel/water from housing. then reinstall filter into housing. tigthten lid then make sure the petcock is closed from draining it earlier. bump the starter a couple times to fill the filter housing then start engine. clean any spilled fuel and your done
Posted on Jan 22, 2009
It's in the fuel tank, no service, only gets replace if fuel pump goes bad, fuel filter is part of the fuel pump, comes as one unit only.
Posted on Jul 22, 2010
It is located on the driver's side of the engine. You will see a yellow handle for the fuel/water separator drain valve at the bottom of the filter housing. The black plastic top unscrews and the filter can be pulled out.
Posted on Sep 16, 2010
Tips for a great answer:
Feb 03, 2016 | Dodge Cars & Trucks
Feb 25, 2015 | 2011 Dodge Ram 2500
Sep 16, 2010 | 2006 Dodge Ram 2500
Jul 22, 2010 | 1995 Dodge Ram 2500
Jun 01, 2010 | 2001 Dodge Ram 2500 Truck
Apr 26, 2010 | 2008 Dodge Ram Pickup 2500
Dec 05, 2009 | 2005 Dodge Ram 2500 Truck
Feb 01, 2009 | 2004 Dodge Ram 2500
Jan 21, 2009 | 2006 Dodge Ram 2500
41 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: