Question about 2006 Hyundai Tucson 2.0

Open Question

How do you adjust the clutch free play on Hyundai Tucson

Only just rest on clutch as it slips

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

jmassengill
  • 345 Answers

SOURCE: Hyundai tucson clutch

Thank you for the request. Since the car only has 24,000 miles on it, I would take it back to the dealer. It does sound like that your clutch needs an adjustment of some type. Since I do not own a Hyundai I have no idea what the actual problem might be. I just did some research and found out that the clutch in your car is hydrolic (meaning that it uses a master and slave cylinder with hydrolic fluid to push the clutch arm when you push the clutch pedal with your foot). Trying to work on this type of clutch system can sometimes be a very hard to do. With the small amount of miles your car has on it, I would get the dealer involved in solving this problem. It could be something as simple as bleeding air from the hydrolic system of the clutch or it might be replacement of either the master cylinder, the slave cylinder and/or the fluid line that goes in between those two cylinders.

Much good luck in fixing this problem.


Posted on Nov 27, 2008

  • 566 Answers

SOURCE: Clutch pedal low near floor, can the clutch be adjusted?

hi the clutch on accent is hydraulic operation so if pedal is very low on disengaging clutch ? you may have a problem with the hydraulics 1st thing to check is fluid level? this is the reservoir that feeds both brakes and clutch but is seperaterated inside if fluid low? top up and bleed the slave cyl however if fluid low indicates a leak ? possibly slave cyl? if no loss of fluid ? then prob may be fault in the master cyl ? check fluid come back with any update please ps if this problem has just occured? check for leaks ?

Posted on Feb 02, 2009

johnthejag
  • 286 Answers

SOURCE: Clutch Sometimes Slipping in 4th and 5th gears!

Hi Jackiaria

Unfortunately you have a hydraulic clutch, which is self adjusting on your car.

The problem you are experiencing is the excessive wear to your clutch, or oil contamination on the clutch plate.

Both these problems can only be fully diagnosed once the gearbox is removed and the clutch is inspected.
There is also a possibility of excessive wear, or scoring, on the flywheel surface, the longer you drive the vehicle with a slipping clutch, possibly requiring the flywheel to be skimmed.

Shop around for a best price, and a trustworthy garage !

Good Luck !

A FixYa rating would be Nice....Thanks.....John.

Posted on Feb 17, 2009

martin538
  • 117 Answers

SOURCE: Hyundai Tucson

The transmission filter is inside the transmission. You have to drain out the oil and remove the transmission pan and gasket. The filter is made of metal guaze and is screwed/bolted to the underneath of the valve body.

Posted on Apr 09, 2009

ghost45
  • 1280 Answers

SOURCE: Frequent useof clutch causes clutch pedal to go hard clutch slips

Adjust the clutch push rod (under the dash).

Posted on Nov 04, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What could be the reason for clutch slipping on my 2002 Hyundai elentra


It may be a simple adjustment
Check the clutch pedal with your hand, move it up and down gently to determine how much "free play" there is before you meet resistance. If there is no free play the clutch will not be fully released.
If the free play is ok it may mean you need a new clutch plate as the friction plates are worn.

Jun 11, 2016 | Hyundai Cars & Trucks

2 Answers

Hyundai. Tucson, 59 plate' clutch slips at high speed when changing gear


check /replace clutch cable or replace master cylinder. If the clutch has not been replaced it may need a clutch kit as the indications are that the pressure plate is weak ( worn clutch plate or from overheated clutch)

Feb 10, 2015 | Hyundai Tucson Cars & Trucks

1 Answer

Slipping Transmission


Not normally as there is no adjustment on the clutch slave cylinder push rod . I would check that the clutch release arm is allowed to return to the rest position and that by pushing it further off you can get free play at the arm. If that is the case replace the clutch master cylinder as there is a blocked compensating port that is not allowing the fluid return to the reservoir. Always do the cheapest fix first.. If the rod is almost at the bottom of the cylinder then I would say that you are in for a clutch kit replacement job.

Apr 02, 2014 | 1986 Ford F 250

1 Answer

I had anew clutch in the hyundia in 2010 it seems to be slipping how long should it last can it be adjusted


Clutch life is determined by several factors, most of which you have control over. Excessive revs while slipping the clutch to move slowly, resting you foot on the clutch pedal instead of the foot rest, starting to move in 2nd instead of 1st, allowing the vehicle to run back when engaging the clutch to go forward. Assuming you do not do any of these things then it comes back to the clutch master cylinder being faulty and a compensating port is blocked and holding the clutch partially disengaged. The clutch is not normally adjustable. I would check the condition of the fluid and if it is almost black I would replace the m/cyl. Find out if the m/cyl has been replace if possible

Feb 01, 2013 | Hyundai Cars & Trucks

1 Answer

Revs slow to drop when changing gears


right the steeper motor is playing up which is why the engine is taking a long time to drop RPM as for teh clutch its auto adjust so if clutch worn then renew it ,clutch life depends on the driver so i can get 150.000kms out of a clutch and one of my customers only gets less than 20,000kms out of a clutch as he pulls away in second and slips clutch when changing gears ,i cringe when i hear him driving past the yard

Jul 17, 2010 | 2004 Hyundai Elantra

1 Answer

Car has done only 3600 miles but clutch seems to slip when trying to pull hard. Hyundai Tucson 2 litre crdi


check your clutch pedal for free play it should be 3/4" it might be adjusted up to much, you might have to adjust it off a little....hope this helps....cheers

Jul 06, 2010 | 2005 Hyundai Tucson

2 Answers

It feels as though the clutch pedal is much softer than it used to be and has to be depressed all the way to the floor to shift and it is more difficult to get into gear, particularly reverse.


try adjusting any free play in your cable connected to the clutch fork from the clutch peddle, there mite be an adjustment screw, nowadays its usually white plastick, take up any free play in the cable,failing this you mite need a clutch replacement.due to ware.

Oct 28, 2009 | 2000 Hyundai Elantra

2 Answers

Clutch pedal is very heavy to push down


If the clutch in your car is hydralic there is no way to adjust that type of clutch. That you describe the clutch as being hard to push and that you have to have the clutch "right down on the floor to engage a gear" is an indication that the clutch is worn and needs to be replaced. If the clutch in your car is pushed by a cable, the cable might be adjustable and if that is the case you might get a few more months of use from the car, but the fix is still the same, you will need to get a new clutch put in your car.

Nov 26, 2008 | 2005 Hyundai Tucson

Not finding what you are looking for?
2006 Hyundai Tucson 2.0 Logo

Related Topics:

478 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...