Question about Cars & Trucks

Open Question

What dose signal disturb mean on my sherrill compass

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2007 checy impala read "calibration complete" what does that mean ????


CALIBRATION COMPLETE
Refer to Electronic Compass Calibration do you have an owners manual ?
Compass Calibration
The compass direction will show CAL if it needs to be calibrated. Before calibrating the compass, drive the vehicle to an area that is magnetically clean (free of large metallic objects).
  1. Turn ON the ignition.
  2. Before calibrating the compass, make sure the compass is set to the variance zone in which the vehicle is travelling. See Compass Magnetic Variation Adjustment below.
  3. Press the vehicle information button until the PRESS TO CALIBRATE COMPASS screen is displayed.
  4. Press the set/reset button to start the compass calibration.
  5. The DIC will display CALIBRATING: DRIVE IN CIRCLES. Drive the vehicle in circles at less than 8 km/h (5 mph) to complete the calibration. The DIC will display CALIBRATION COMPLETE when the calibration is complete.

Oct 02, 2016 | 2007 Chevrolet Impala

1 Answer

How do I replace the Drivers side turn signal lens on a 2009 jeep compass


from inside the hood of cur=urse you might have to movea few things

Jan 26, 2015 | 2009 Jeep Compass

1 Answer

Body control module control not communicating with the over head compass trip computer


It could be corrosion at the plug ends, either side. Or a bad wire. Bcm's and the console electronics are not protect from moisture/water. So it could be on the circuit boards also.

Apr 20, 2014 | 2001 Dodge Ram 2500 Truck

1 Answer

What is the fuse location for a 2007 jeep compass, turn signal


there is no turn signal fuse it is integrated with the fuse module.

Oct 27, 2009 | 2007 Jeep Compass Limited

1 Answer

2008 Jeep Compass: Possible Electrical Problems...


I am having the same problem. Did you ever get it worked out? I would appreciate any help that you could give me.
Thanks,
Robert

blankman296@hotmail.com

Oct 26, 2009 | 2008 Jeep Compass

1 Answer

1997 Nissan Terrano electronic compass blinking


CORRECTION FUNCTIONS OF COMPASS
NAEL0307S01
The direction display is equipped with automatic correction function.
If the direction is not shown correctly, carry out initial correction.
INITIAL CORRECTION PROCEDURE FOR COMPASS
NAEL0307S02
1. Pushing the “Mode” switch for about 10 seconds will enter the
initial correction mode. The direction bar starts blinking.
2. Turn the vehicle slowly in an open, safe place. The initial correction
is completed in one or two turns.
NOTE:
In places where the terrestrial magnetism is extremely disturbed,
the initial correction may start automatically

Feb 08, 2009 | 1997 Nissan Pathfinder

4 Answers

1997 Toyota land cruiser prado Rz compass bearing, temperature setting, etc.


I've been resetting pajero's compasses but try to get to an area where you can do 360 degrees turns (empty car parks, ) press the reset button and make 2 complete 360 turns slowly and normally this should set the compass bearing.
Let us know how you get on. Cheers.

Sep 14, 2008 | 1996 Toyota Land Cruiser

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

59 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...