Question about Cars & Trucks
Parts tore may do some good here just ask with make and model if not try the service dept of a local dealer..good luck..
Posted on Jan 19, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
click on this link, and scroll down to 5.7L
Posted on Dec 22, 2008
First, I'd recommend you buy a manual, because the water pump is internally mounted, driven by the timing belt. You will also need a puller to remove the crankshaft pulley. You can usually rent/borrow this from the same place you bought the manual. The manual will also show you how to properly install the timing belt and compress the tensioner.
You will need to drain the cooling system, raise the car (safely), remove the right tire, right inner fender, right engine mount (aka front mount), accessory drive belts, timing belt cover, timing belt and tensioner (which needs to be recompressed correctly), and now you are at the water pump. Since the timing belt has to be removed, you should also replace it.
Posted on Sep 19, 2009
Headlight Bulb Replacement
1. Open the hood and remove the two headlight mounting
2. Remove the push-in fasteners for the grill area by prying under the
head of the fasteners with a flat bladed tool.
Posted on Feb 03, 2010
For 2004 Dodge Stratus 2.4L SFI SOHC 4cyl the Head Bolt Torque sequence
------------ | 10 6 2 3 7 | | 9 5 1 4 8 | ------------
Step: 1 - Torque to 25 ft/lbs
Steps: 2 - Torque to 50 ft/lbs
Steps: 3 - Torque to 50 ft/lbs
Steps: 4 - Turn 90 degreesRecheck final torque in sequence
Caution:Engine uses torque to yield head bolts (TTY) that permanently stretch during initial installation. New head bolts must be used when cylinder headis replaced or re installed to obtain proper torque specification.
Hope helps (remember comment and rated this).
Posted on Aug 02, 2010
Testimonial: "I appreciate your quick response. Thanks"
Tips for a great answer:
Jul 07, 2016 | Dodge Cars & Trucks
Nov 01, 2014 | 2005 Dodge Stratus
Oct 16, 2014 | 2005 Dodge Stratus
Apr 05, 2014 | 2004 Dodge Stratus
May 17, 2011 | 2004 Dodge Stratus
Apr 04, 2011 | 2005 Dodge Stratus
Jan 10, 2011 | 2004 Dodge Stratus
Jun 15, 2009 | 2005 Dodge Stratus
Dec 22, 2008 | 2004 Dodge Ram 1500
Aug 29, 2008 | 2004 Dodge Stratus
36 people viewed this question
Usually answered in minutes!