Question about Nissan Cars & Trucks
Hight rpm and than lower
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I had the same problem before. after using the scanner i got a code number P0507. "Idle Air Control", New 2002 and up Nissan models like my Altima don't have an idle valve or sensor like older models to be replace. Here's the solution " Replace your "Throttle Chamber" the idle sensor is build in it, there is no other way to fix this problem. the throttle chamber is about $175.00 at your Nissan Dealer. The need your core or you will need to pay extra money. No need for expensive mechanic shop, you could do this your self. the throttle chamber is so easy to remove, four screws holds it together. I will take you about ten to twenty minutes to replace it. Please trust me and you will save big bucks!!!!!
Posted on Jan 13, 2009
1995 Nissan Pathfinder Car Stereo Radio Wiring Diagram
Car Radio Constant 12V+ Wire: Pink
Car Radio Switched 12V+ Wire: Blue
Car Radio Ground Wire: Gray
Car Radio Illumination Wire: Red/Blue
Car Radio Dimmer Wire: Red/Yellow
Car Radio Antenna Trigger: N/A
Car Radio Amp Trigger Wire: N/A
Front Speakers Size: 5′ x 7′
Front Speakers Location: Doors
Left Front Speaker Wire (+): Pink
Left Front Speaker Wire (-): Blue
Right Front Speaker Wire (+): White
Right Front Speaker Wire (-): Black
Rear Speakers Size: 5′ x 7′
Rear Speakers Location: Roof Mount
Left Rear Speaker Wire (+): Light Green
Left Rear Speaker Wire (-): Purple
Right Rear Speaker Wire (+): Blue
Right Rear Speaker Wire (-): Pink
Posted on Nov 20, 2009
Just hold the lock and unlock button on your key until you hear the horn again. Then its activated :)
Posted on Dec 10, 2009
Testimonial: "Excelletn solution, was looking for solution for months, vvg418 is super, can't thank enough."
Have the car re-learn the larger amount
of air volume that the modification creates, here is the procedure for doing this. It's
similar to the ECU clearing procedure:
1) Drive the car to "warm up" temperature. Make sure your idle is close to 700 rpm.
2) Ensure any battery draining devices are off. Ie. headlights, interior dome lights, HVAC,
3) Turn the car ignition key to "OFF"
4) Wait ten seconds
5) Turn the key to "ON" (not start)
6) Wait three seconds.
7) Perform the following five times in five seconds or less. Fully press the gas pedal and
8) Wait seven seconds from last of the five releases.
9) Fully press the gas pedal and hold down. Within ten seconds the "Service Engine Soon"
light should begin to blink.
10) Wait another ten seconds (while still holding the gas pedal) and the "Service Engine
Soon" light should stop blinking.
11) As soon as it stops blinking, release the pedal, start the car and check the idle
(should still be around 700 rpm)
12) Let the car idle at 700 rpm or so for about 25 seconds, rev the engine a few times and
then let it return to idle.
13) Shut the car down.
You car has now relearned the new air volume, which should be different than it was
(stock). You may notice a bit of a rough idle for the next 20 miles. This is normal and
will go away. The reason you should make sure idle is around 700 rpm (full warm up) is
because the car measures the air curve in relation to idle, so you don't want to confuse
Posted on Feb 25, 2010
Tips for a great answer:
Sep 28, 2015 | 2005 Nissan Altima
Apr 17, 2015 | Hyundai Santa Fe Cars & Trucks
Jul 27, 2014 | 1999 Daewoo Leganza
Apr 23, 2013 | 2002 Nissan Sentra
Jun 21, 2017 | 2002 Nissan Altima
Jun 14, 2011 | 2003 Nissan Maxima
Jun 04, 2011 | 2005 Nissan Quest
Feb 04, 2011 | 1998 Buick Regal
Aug 05, 2010 | 2004 Ford Focus
Jun 07, 2010 | 2005 Nissan Altima
82 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: