Question about Cars & Trucks

Open Question

ZITON FIRE ALARM PANEL ZP3 CANNOT ISOLATE SOUNDERS

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My first alert fire alarm is chirping...three quick chirps....help please...the noise is driving me crazy


replace the flat battery
normally a chirping alarm is indicating that the battery is going flat and the alarm is no longer reliable
most fire authorities recommend a anniversary date and change the battery on that date for example ---every christmas eve

Nov 27, 2016 | Cars & Trucks

1 Answer

How to disconnect the alarm system .


just cut the red wire and isolate him

Nov 20, 2014 | 1994 Mazda 929

1 Answer

Why did the wires to the alarm system burn?


water is a great conductor and probable caused short --thats why water and electricity dont mix

Aug 06, 2017 | Toyota Cars & Trucks

1 Answer

Is the Simplex 2001 panel an addressable fire alarm control panel


late answer i know.

but no, the simplex 2001 is not an addressable fire alarm panel. it is a zoned panel.

this panel has not been made for several years and new parts cannot be obtained. it may be possible to obtain used parts if you call your local simplexgrinnell office.

May 22, 2012 | Cars & Trucks

1 Answer

I lost my keys for toyota celica 1996 year,i had another 2 keys and but without remote,now when i opening door with keys alarm turns on and after that when i startin engine after 1 minutes alarm turns...


Look under the steering column ,now normally on an after market alarm installation ther should be bunsh on wire tied up with plastic zip-ties --looks like a mess , and in that a mess look for a square relay about 1" sq. Unplug that. That will isolate the alarm system.Good Luck

Oct 12, 2009 | 1996 Toyota Celica

1 Answer

Car alarm goes off repeatedly every 20 minutes or so


In this particular vehicle you must diode isolate from the GEM module . What happens is when you arm the vehicle the electronic module in the vehicle stays awake and then in about 20 min- 30 min then it shuts down and sends a a pulse and the alarm detects it as an intrusion and makes the alarm go off . Take it back to a shop or try to isolate it yourself


Jul 15, 2009 | 2002 Ford Explorer

2 Answers

After recharging the car battery car alarm not


may have to reprogram alarm completely along with shock sensor. may have shorted something out as well during the recharge isolate and test the alarm with the car off...

Jun 12, 2009 | 1998 Toyota 4Runner

1 Answer

Parking lights & dash lights stay on all the time, even when fuse is pulled.


do you have an after market alarm installed if you do then the problem is a back feed from the lights output of the alarm. Diode isolate.

Nov 04, 2008 | Honda Civic Cars & Trucks

2 Answers

Battery drain


Best bet is to disconnect the clock and disable the alarm and see if you still have a drain. If you do, it's likely that it's something inside the computer (although that seems far-fetched). Chances are there are more components than that in the suspect circuit. However, that being said, I'd suspect the alarm system - the ECU doesn't really draw power with the car off, per se, and the clock is a minimal drain. Something shorting out in the alarm however, will likely drain your battery quickly. I have seen faulty sensors added as part of an alarm system cause battery drains in the past.

Oct 14, 2008 | 2001 BMW Z3

1 Answer

I hope you can help me!!!!!!


It sounds as though you are having a security (alarm) system issue. Does this vehicle have an aftermarket alarm installed? If you recently bought this car, it might have one that you don't even know about. Try locking and unlocking both front doors with the key. If the vehicle has a factory alarm system, this is the usual way to deactivate it. If that does not work, look up behind the dash on the driver's side. An aftermarket alarm system is usually pretty easy to spot as it'll have a bunch of wires connected to it that are usually wrapped in black tape and you can tell it's not factory installed. If this is the case, there will be a valet switch somewhere in the vicinity of the driver's kick panel. To turn the alarm off, turn the ignition switch to the on position and press the valet switch. This should turn the alarm off.

Jul 21, 2008 | 1993 Chevrolet Suburban

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...