Question about 2001 Ford Escort ZX2

Open Question

Remove rear bumper on a 2001 ford escourt zx2

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

michigan man
  • 3533 Answers

SOURCE: I am looking to buy

try an after market place that sells parts also a salvage yard also remember because cars are made at different factories through out the world take the exterior paint code inside on the driver door and the VIN# normally it is the 7th number on the vin so if you find one with the paint code of your car it will save you having to paint it but finish master are really good on matching paint

Posted on Jan 14, 2009

mikehitchner
  • 28 Answers

SOURCE: how difficult is it to remove the rear bumper on a Ford Explorer

its not the bumper

Posted on Jan 01, 2010

  • 1206 Answers

SOURCE: 1999 ford Escourt zx2. have fir and fuel. timing

check exhaust could have bad catalytic,i have seen them melt to the point engine does not start due to complete blockage, hope this helps you.

Posted on Jan 29, 2010

  • 1757 Answers

SOURCE: supinten belt on a 2002 ford escourt zx2 2L

Sorry for the delay. I am personally going back to answer your unanswered question.
I do not know if you still need the answer, but I am going to answer it in case you still do.


Click on the following direct Link. It has the Serpentine Belt Diagrams that you will need for your specific engine size and options (AC/No AC...etc).

http://www.2carpros.com/car_repair_information/year/2002/make/ford/model/zx2/2002_ford_zx2_drive_belt_routing_diagram.htm

Posted on Mar 23, 2010

ftw1952
  • 10319 Answers

SOURCE: need to remove rear bumper from 2001 ford explorer

easier to remove the frame bolts from the brackets and remove the entire assembly and place it on a set of hourses to remove the face bar separately. bodymen do it this way all the time for it is the easiest way to do it

Posted on Sep 04, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The brakes light won't go off. Ford Escort ZX2 2001


either replace brake light switch or check on the brake pedal arm for a 1/2 diameter blue rubber brake light switch bumper pad. The brake switch is normally closed which means when you push the on brake pedal the switch makes and power is applied through the switch to the lights. When the brake pedal is released the switch actuator strikes the rubber bumper and opens the switch contacts. If the bumper is missing the switch will not open to break the power circuit to the lights.

Apr 13, 2011 | 2001 Ford Escort ZX2

1 Answer

Location of horn for a 99 ford escort zx2


You have to remove the front bumper cover to gain access to the horn. It is below the passenger side headlight.

Jan 01, 2011 | 2001 Ford Escort ZX2

1 Answer

Instructions for replacing fuel pump in a 2001 ford Escort ZX2


Remove the rear seat, remove the 4 screws holding the metal cover, and you'll see the top of the fuel tank. The pump module is held in place by a locking ring that can be removed by use of a brass punch and hammer. If the ring is rusted, it'll get damaged during removal and will need replaced. You can get a new ring from Ford. Once the ring is removed, you can pull the pump module out. Remove the small screws from the top of the module and you can pull the top off of the basket to gain access to the fuel pump. Replace the pump and get new fuel pump strainers.

Feb 09, 2010 | 2001 Ford Escort ZX2

1 Answer

1999 ford Escourt zx2. have fir and fuel. timing belt good. what isthe solution?


check exhaust could have bad catalytic,i have seen them melt to the point engine does not start due to complete blockage, hope this helps you.

Jan 29, 2010 | 1999 Ford Escort

1 Answer

Supinten belt on a 2002 ford escourt zx2 2L


Sorry for the delay. I am personally going back to answer your unanswered question.
I do not know if you still need the answer, but I am going to answer it in case you still do.


Click on the following direct Link. It has the Serpentine Belt Diagrams that you will need for your specific engine size and options (AC/No AC...etc).

http://www.2carpros.com/car_repair_information/year/2002/make/ford/model/zx2/2002_ford_zx2_drive_belt_routing_diagram.htm

Nov 10, 2009 | 2002 Ford ZX2

2 Answers

I'm trying to remove a 2001 ford escort headlight but cant get access to all the screws.. do I have to remove the bumper? And if so how??


your prabably removing too much. Get the replacement bulb first. Unplug the connector and put in the new bulb from the rear of the housing

Sep 02, 2009 | 2001 Ford Escort ZX2

1 Answer

2000 escourt zx2 left front end clunking noise when hitting bumps or letting out the clutch in 1st gear .Ball joints and springs/struts have been replaced.


have u looked at the top mounts allso could be gearbox or engine mounting allso is it front wheel drive could be drive shaft joints

Aug 21, 2009 | 2001 Ford Escort ZX2

2 Answers

I am looking to buy a used white 2001 ford zx2 that was rear ended and needs the rear bumper replaced, what is an estimate for the cost?


try an after market place that sells parts also a salvage yard also remember because cars are made at different factories through out the world take the exterior paint code inside on the driver door and the VIN# normally it is the 7th number on the vin so if you find one with the paint code of your car it will save you having to paint it but finish master are really good on matching paint

Jan 13, 2009 | 2002 Ford ZX2

1 Answer

STARTER


the starter motor is on the rear side of engine nearest bulkhead and is connected to the engine where it connects to g/box clutch housing by three bolts b4 you tamper disconnect the earth lead from battery also if location is not clear in above ? follow the positive +red lead to where it connects on engine this will be the starter solenoid part of motor hope this helps ps to remove starter is best done and more accessable from below

Dec 27, 2008 | 2001 Ford Escort ZX2

1 Answer

Replace ford escourt 1800 d head


Did you get the torque yet?

Cheers

Jul 03, 2008 | 2001 Ford Escort ZX2

Not finding what you are looking for?
2001 Ford Escort ZX2 Logo

Related Topics:

96 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5470 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...