Question about 2005 Honda Accord Sedan

Open Question

Cant unlock the trunk lock in my 2005 honda accord

I locked my trunk valet lock but now it won't unlock

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 840 Answers

SOURCE: 2005 honda accord doors will not open with remote

need an actuator for the driver door need more info go to collisionrepairadvice.com for how to do it yourself

Posted on Apr 11, 2009

  • 1 Answer

SOURCE: The trunk lock on my 2005 Honda Civic won't

On the floor driver side there is a compartment for a key just where the latch is to open your trunk. put ignition key in and turn it . should open for you. ..............good luck

Posted on Sep 07, 2009

  • 32 Answers

SOURCE: 05 Honda accord remote not working doorlocks

Your door actuators are out and will need to be replaced. This is a common problem . My 03 has this issue too. Actuators are about $70 each. I would recommend finding a good stereo shop to install them instead of the dealer since stereo shops deal with removal of door panels and actuator installs day in and out.

Posted on Nov 07, 2009

  • 11064 Answers

SOURCE: car radio decoder

notify dealer they have code the radio code is a security[anti theft ]code but it also activates when battery dies or changed out

Posted on Jan 25, 2010

geo5734036
  • 528 Answers

SOURCE: 2005 Honda Accord - the passenger door lock will

I suspect you lock linkage rod came off inside the door.Remove the door panel and lock / unlock manual knob as you watch the rod to see if it is moving. Typically a door panel will have a few screws and several push in fasteners holding the panel on the door. Look the panel over closely and remove all screws, including the handle bucket and top left side screws - some vehicles have screws on the edge of the door. Use a large flat blade screwdriver to slide along between the door and panel, twisting at the points where the panel is tight to the door. These push ins will be tight and your local auto parts store has a special tool for removing the push ins - this would be the safest route to go to prevent damaging the push ins. Remove panel and look at the locking mechanism - I think this is where you have the disconnect issue. There is a plastic retainer that the rod goes into. It pushes into the lock mechanism and swings over the arm. Sometimes these retainers break and the arm falls off, so you may need to replace them. Your local parts store mat have these in stock or be able to order them for you - otherwise you'll need to go to either the dealer or a body shop to get the parts. You can get an exact diagram of the interior of your door to show you the specifics of the mechanism at
www.alldata.com
They charge a fee for the look up and you can print out what you see there for future reference.
I hope this helps and please rate my solution - Happy Thanksgiving!!!

Posted on Nov 25, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Alarm won't turn off


the valet key doesnt have a transponder chip in it, so it will allow physical turning of keyways and operations, but will not disable the alarm and often wont disable the immobilizer.

sorry to say i think you will need to get an autolocksmith , or main dealer to get you a functioning key with transponder chip mapped to your cars rfid system that will allow alarm to be enabled /disabled

Mar 23, 2017 | 2000 Volkswagen Jetta TDI

2 Answers

My trunk won't open, I have tried my trunk button and the key won't work, it worked fine a few hours, but even when i try to do it manually it won't open. Also I would look in and try the...


There are 3 phases to fixing your car's trunk lid release problem.

Phase 1: First check the fuse - once you know that's OK, then proceed to phase 2 (below).
The fuse for the trunk lock is
the bcm (pwr) 15A fuse in the instrument panel fuse box (behind panel at drivers right foot)

Check that fuse, as it is the power supply for the button on the dash that sends power to the actuator in the trunk.

Phase 2: Get the trunk open (without taking it to the dealership).
If you have remote keyless entry to the trunk, you could try that - but with the actuator
dead/dying, it shouldn't work.

Here are a couple of ideas to try to enter trunk while (a) actuator isn't working, and (b) all
valet lockout features (designed to deny valets access to the trunk) are in the "Lock" position:

There is the lock cylinder, which you stated is not functioning - put the key in, and it doesn't
turn. Just to be sure, consider: lubricate key with Graphite lock-type lubricant, and retry.

The trunk has 2 valet safetys...the locking rear seats which require access to the trunk to unlock, and then there is a valet switch in the trunk that locks the button on the dash from working to keep valet parking attendants out of the trunk. That may be in the lock position.

You can try accessing the center area of the fold down rear seat and see if you can unhinge the rear seat from there. Maybe reach in with your hand, or an extension-type tool.

there may be a way to fold the hinge away from the seat back so it can be removed from the hinge and give you access to the safety latch in the trunk and open it that way (white handle in trunk).
The white-handled safety latch release is desiged to prevent accidentally trapping children, and
if you can pull it with your extending-type or grasping-type tool, the trunk will open whether or
not the actuator motor is working.

Phase 3: Replace the Problem part.

Your failed part may be either (1) Trunk Release Relay, or (2) Trunk Lock Release Switch

My Satrun ION manual doesn't cover either of these parts, and the online parts houses, e.g.
http://www.rockauto.com/catalog/x,carcode,1431624,pgname,Electrical-Switch%2B%2526%252338%253B%2BRelay,a,search.yahoo.com%2BSearch%2Bfor%2B2004%2BSATURN
fail to provide instructions. One of those times a mechanic has to t=rely on his/her native
handiness and/or experience.
To identify which of these parts is bad, locae the Trunk Release Relay (call your dealer parts
dept. for helpful tips on finding it), then operate the dashboard trunk release button with your
ear close tothe relay - if it makes a noise, the problem is the Trunk Lock Release Switch in
the trunk lid, otherwise its the relay.

Aug 15, 2011 | 2004 Saturn ION

2 Answers

Inside trunk release won't open trunk on 2002 Camry. Lock will not turn with master key. Remote trunk opener will open trunk.


1. Open trunk
2. Place latch in lock position
3. Pull inside trunk release to see what isn't moving
4. If trunk key won't turn, the key may be worn out and need to be replaced

Jun 05, 2011 | Toyota Camry Cars & Trucks

1 Answer

'91 LS400, trunk will not open. key will not turn, electric latch switch clicks but won't open. valet lock in open position. Tried 1) disconnect battery, reconnect battery, use switch, push down on...


If you hear the sound of the electric latch switch, then it's working but stuck somehow. Just put the key in the switch and turn it to the right and then pull up the trunk or ask someone to help you. it will open. I tried it today and it opened with me. It was stuck from inside by some kind of a broken plastic pieces. Just removed it and now it's working fine. good luck

May 26, 2011 | 1991 Lexus LS 400

1 Answer

Just bought this car I can't open the trunk with ignition key


It either has had the trunk replaced and the old cylinder wasn't installed, or the key you're using is the valet key. See if you can lock/unlock the glovebox. If you can't you're using the valet key. If you can, your trunk lock cylinder is not original.

Oct 01, 2010 | 1997 Audi A4

1 Answer

Cant get my 99 xj8 out of valet mode, and my trunk will not open.


There are Valet keys (often with a green knob) that will
only unlock the front doors and the ignition but not the
glove box nor boot/trunk.

When either the front door locks or the console button is
pressed, all the doors should lock. Likewise, when either
front door is unlocked, all the doors fuel filler lid and if
selected, the boot will also unlock.

Boot lock has three positions. Unlocked to the left,
automatic with the doors in the center, always locked to the
right. Simply remove the key in what ever position you desire.

The locks can get confused and not work correctly. Simply
sit in the car and manually lock all the doors. That will
usually get the locking module sane again.

Feb 28, 2010 | 1999 Jaguar XJ

1 Answer

Can't lock my Honda Accord as alarm goes off when locked


if you have a valet key, stick it it on the passenger side when unlocking door, so it wont alarm while you open the door hope that helps

May 17, 2009 | 1998 Honda Accord

1 Answer

Where is the valet switch on a 1999 honda accord?


Your Grey key is the valet key.

The Grey key will not open the glove compartment nor the trunk, BUT you have to lock the back shelf and remote trunk release handle in the car, and the glove compartment with the black key first.

Apr 27, 2009 | 1999 Honda Accord

Not finding what you are looking for?
2005 Honda Accord Sedan Logo

Related Topics:

98 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...