Question about 2008 Chevrolet Impala LT
The check engine light should be on and there should be a code or codes in the computer which would tell you the cylinder in question.
If so, the problem could be ignition, fuel, or compression.
Posted on Jan 19, 2013
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
ur vehicle is in limp mode[ a safe mode ] which will get u home trying not to cause any damage to engine --theirs a few reasons the vehicle will do this-low oil pressure-transmission problem-have vehicle scanned most auto stores such as auto zone / advanced auto [check ur local area]do this service for free the code gives u a start point towards resolving ur problem
Posted on May 11, 2010
There are two hoses that come from the radiator. The very bottom hose is conneted to the thermostat housing. Looking at the car from the front under the hood just below the first hose is another one same in diameter and there it is two bolts and you done.
Posted on Dec 03, 2010
the shift lever solenoid is going bad, you didnt mention if it was a column shifter lever or console shifter so i cant tell you how to bypass it, same problem with my chevy,hope this helps, you may need to get this done by a dealer or honest mechanic, if you can find 1, but im sure it will help you out if you look like you know what your talking about, im sure this is your problem! good luck
Posted on Jan 07, 2011
Tips for a great answer:
Feb 19, 2017 | 2003 Chevrolet Impala
Jan 27, 2016 | Cars & Trucks
Jan 23, 2016 | Cars & Trucks
Feb 28, 2015 | 2008 Chevrolet Impala
Jul 06, 2014 | 2008 Chevrolet Impala
Jan 29, 2014 | 2008 Chevrolet Impala
Feb 20, 2018 | 2008 Chevrolet Impala
May 11, 2010 | 2008 Chevrolet Impala
161 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: