Question about 1997 Ford Escort

Open Question

Ford escort zetec motor 1.6 16v 1997 motor - 1997 Ford Escort

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 416 Answers

SOURCE: replaced alternator on 1997 ford escort and battery indicator lig

Battery light is on and battery is not holding the charge because you have at lest one cell damaged
because of accidental short-circuits between the battery terminal. So most probably you need to get new one (in Sears starts from $49,99) For fuses location follow this link please
Good Luck
http://www.autozone.com/az/cds/en_us/0900823d/80/15/66/b3/0900823d801566b3/repairInfoPages.htm

Posted on Dec 25, 2008

Ad
  • 92 Answers

SOURCE: how to do cam timing on a ford escort 1997 1600 16v zetec

set youre crankshaft on zero and put the belt on

Posted on Mar 14, 2009

  • 14 Answers

SOURCE: Ford Escort 1995 Zetec Engine.fuel pump switch on

POSS AIR FLOW METER

Posted on Apr 17, 2009

  • 94 Answers

SOURCE: cooling fan relay

its not an actual relay is like a relay assembly

Constant Control Relay Module (CCRM)


The Constant Control Relay Module is located at the LH front of the engine.

Posted on May 27, 2009

ZJLimited
  • 17970 Answers

SOURCE: changing the water pump on a ford escort 1997

2.0L Engine
SOHC ENGINE
See Figure 8

  1. Disconnect the negative battery cable.
  2. Raise the car and support it with safety stands.
CAUTION Never open, service or drain the radiator or cooling system when hot; serious burns can occur from the steam and hot coolant. Also, when draining engine coolant, keep in mind that cats and dogs are attracted to ethylene glycol antifreeze and could drink any that is left in an uncovered container or in puddles on the ground. This will prove fatal in sufficient quantities. Always drain coolant into a sealable container. Coolant should be reused unless it is contaminated or is several years old.
  1. Drain and recycle the engine coolant.
  2. Remove the timing belt.
  3. Unfasten the timing belt tensioner bolt and remove the tensioner.
  4. Disconnect the lower radiator hose from the water pump.
  5. Lower the car and disconnect the heater hose from the water pump.
  6. Unfasten the three bolts and one stud from the water pump.
  7. Remove the water pump.
b3b4f25.jpg

Fig. 8: Location of the water pump mounting bolts (A) and stud (B)-2.0L SOHC engine


To install:

WARNING Do not use any abrasive grinding discs to remove gasket material. Use a plastic manual gasket scraper to remove the gasket residue. Be careful not to scratch or gouge the aluminum sealing surfaces when cleaning them.
  1. Clean the gasket surfaces thoroughly until all traces of the old gasket residue are removed. Inspect the gasket mating surfaces, both must be clean and flat.
  2. Install a new gasket and the water pump.
  3. Install the water pump bolts and stud to 15-22 ft. lbs. (20-30 Nm).
  4. Connect the heater hose to the pump.
  5. Raise the car and support it with safety stands.
  6. Connect the lower radiator hose to the pump.
  7. Install the timing belt tensioner and tighten the bolt to 15-22 ft. lbs. (20-30 Nm).
  8. Install the timing belt and lower the car.
  9. Fill the cooling system with the proper amount and mixture of coolant.
  10. Start the engine and check for leaks.

DOHC ENGINE
See Figure 9
  1. Disconnect the negative battery cable.
CAUTION Never open, service or drain the radiator or cooling system when hot; serious burns can occur from the steam and hot coolant. Also, when draining engine coolant, keep in mind that cats and dogs are attracted to ethylene glycol antifreeze and could drink any that is left in an uncovered container or in puddles on the ground. This will prove fatal in sufficient quantities. Always drain coolant into a sealable container. Coolant should be reused unless it is contaminated or is several years old.
  1. Drain and recycle the engine coolant.
  2. Raise the car and support it with safety stands.
  3. Unfasten the splash shield bolts and remove the shield.
  4. Loosen the water pump pulley retaining bolts, then remove the drive belt.
  5. Remove the A/C compressor bolts and move the compressor aside.
  6. Unfasten the water pump retainers and remove the pump from the middle timing belt cover.
385501e.jpg

Fig. 9: Remove the water pump mounting retainers-2.0L DOHC engine


To install:
  1. Install the water pump and tighten the retainers to 17 ft. lbs. (24 Nm).
  2. Place the A/C compressor in position and tighten the mounting bolts.
  3. Install the drive belt and tighten the water pump pulley bolts.
  4. Install the splash shield and tighten the bolts.
  5. Fill the cooling system with the proper amount and mixture of coolant.
  6. Connect the negative battery cable.
  7. Start the engine and check for leaks.

Posted on Jul 20, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

A FREE MANUAL BOOK OF FORD ESCORT STATION WAGON 1.6L ZETEC MOTOR ?


TYPE "MANUAL FOR FORD ESCORT STATION WAGON 1.6L ZETEC MOTOR" IN WEB SEARCH BAR IF YOU HAVE ACCESS TO INTERNET THEN LOOK FOR PDF FILE CONTAINING FORD ESCORT STATION WAGON 1.6L ZETEC MOTOR AND PRINT IT. YOU HAVE YOUR FREE MANUAL.

Jun 10, 2017 | Ford Cars & Trucks

2 Answers

Does this car have an interference motor?


ford escort/ focus engine 2.0 l spi sohc 1997-2004 has been identified as an intereference engine and that means very likely valve to piston damage
( auto data timing belt information )
note-- up to 2002 year Ford has not recommended a timing belt interval for changing
Ford has however recommended a replacement every 120.000 miles using the service history as a guide
however good professional trade practice recommends every 60.000 miles ( 100.00klms) and the replacement work should include replacement of the crank and cam shaft seals and idler pulleys involved ( the biggest destroyer of belts is oil)
recommended labor time is 2 hours
if the belt has broken then head removal and valve work will add up to 5 hours to that time

Feb 25, 2016 | 2001 Ford Escort ZX2

1 Answer

How to set timing marks on 1.8 16v Zetec Escort 97


how I change the fusebox of Escort Zetec 1.8 (1998) SW?

Jun 07, 2010 | 1997 Ford Escort

1 Answer

What mileage do u change the timing belt on a 1997 ford escort zetec


The Ford maintenance info for 97 Escort can be found at the below site, where you can download your original owners manual and maintenance schedule for free. It states to replace the camshaft drive belt every 60k.
https://www.fleet.ford.com/maintenance/owners_manuals/default.asp

May 03, 2010 | 1997 Ford Escort

1 Answer

1998 ford escort 1.6 zetec,solenoid stuck when the engine is started,is this the starter motor faulty or is it something else??


Yes it is the starter motor, remove it and check, you probabley will have to replace the starter Bendix.

Jun 25, 2009 | 1998 Ford Escort

1 Answer

How to do cam timing on a ford escort 1997 1600 16v zetec


set youre crankshaft on zero and put the belt on

Mar 12, 2009 | 1997 Ford Escort

1 Answer

1997 escort 1.8 gti zetec


it should be a 5/8th inch (us) assuming that this is a AGSP32C plug that cross ref to a 2756 NGK plug. Let me know MRRodneyLong@gmail.com

Jun 18, 2008 | 1997 Ford Escort

Not finding what you are looking for?
1997 Ford Escort Logo

Related Topics:

83 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...