Question about 1994 Ford Taurus

Open Question

Where is door chime relay located on 98 taurus?

Posted by Anonymous on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 2963 Answers

SOURCE: 98 Ford Explorer. No chime sounds when keys left in ignition and driver door open. Also no chime that lights are on. Passenger door chimes when opened and key in ignition.

Bad door switch, or it may be dirty and "stuck" in the recessed position as it would be when the door is closed. I find WD-40 or equal is a good solution for this. Otherwise the switch's connections are bad (corrosion) or the switch itself is bad. More extreme is a break in the wiring to the switch and or connection near the fuse.

Posted on Mar 26, 2015

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a 98 Taurus a day I want to have my door open and listen to the radio without the door chime going good off and my key still in the ignition


When you open the door down towards the bottom is a black push button when the door is open the chime sounds you can push it in and tape it

Oct 16, 2016 | 1998 Ford Taurus

1 Answer

Door chimr module loca5ion 2005 taurus


There isn't a chime module , built into instrument cluster !
Door Ajar Chime
The door ajar chime feature is controlled by the smart junction box (SJB). The driver and passenger door ajar switches, and the lift gate are hardwired to the SJB. If any door or lift gate is sensed as being open, and the ignition switch is in RUN/START position, the SJB will process the input and sends a chime request to the instrument cluster over the controller area network (CAN).
Safety Belt Warning Chime
The safety belt chime feature is controlled by the restraints control module (RCM). The driver safety belt switch is hardwired to the RCM. The RCM communicates with the instrument cluster over a hardwire connection. If at any time during the first 6 seconds after the ignition switch is placed in RUN the driver safety belt is sensed as being unfastened, the RCM will process the input, and in turn, sends a chime request to the instrument cluster.
Do you know what C.A.N controller area network is ? Serial data communication bus.
Do How to Diagnose Controller Area Network CAN

May 28, 2016 | 2005 Ford Taurus

1 Answer

Where is the Power Windows Fuse in a 2005 Ford Taurus?


It is located in the SJB smart junction box , it's a fuse / relay center / microprocessor ! Fuse # F2.10 30 amp . location -behind left side dash panel . Also check the accessory relay . Top relay left side , same location SJB .
Visual Inspection Chart Mechanical Electrical
  • Door window regulator and motor
  • Door glass top run
  • Door window glass
  • Loose, corroded connectors
  • Circuitry
  • Window control switch
  • Battery junction box (BJB) fuse(s):
    • 1 (60A)
    • 3 (60A)
    • 11 (50A)
  • Smart junction box (SJB) fuse(s):
    • 7 (20A)
    • 27 (10A)
    • 30 (10A)
  • SJB circuit breaker 10 (30A)
  • SJB rear window defrost relay 1
  • Relay center box 1 rear window defrost relay 2
  • Delayed accessory relay
  • Battery saver relay
  • Rear window defrost grid

Sep 23, 2015 | 2005 Ford Taurus

2 Answers

98 ford taurus wgn se door ajar light wont go out


The switches that activates the door ajar are located on the body frame. For front doors try looking between the hinges, on the frame of the body cavity. Might have a rubber grommet around it. On the back doors, look on the frame of the body cavity near the hinges.

Apr 02, 2010 | 1998 Ford Taurus

1 Answer

"ding" won't stop


It might be the door chime relay itself that is shorted out. First remove it and see what happens . You should have power to the radio. To properly test it use a voltmeter and hook it up to the door chime terminals , then depress the door switch and see if the voltage droped to zero. If it did then the culprit is the relay if it didn't then its either the switch or you have a short in the system.

Mar 30, 2010 | 1994 Ford Taurus

2 Answers

The door open light on the dash and the dome light wont go off on a 1999 ford taurus


Check the relay, replace it with the one right next to it, if that works, buy a new relay. If that does not work, you will need to replace the switch.

Mar 12, 2010 | 1999 Ford Taurus

1 Answer

Location of door chimes module chimes wont stop and the aut door locks lock it back when i unlock it


one of the doors is not closed completely or...... the button is stuck in the depressed position. try each door one at a time, shut each firmly and check the result or................ look inside the door frame when the door is open to see if the button is popped out(there is a button that looks like a stem in the door jam towards the hinge end of the door). if you find one that is stuck (pushed in as if the door was closed) then pop it out with your finger or small screw driver and then lubricate it with a few drops of oil.

Feb 13, 2010 | 1998 Ford Taurus

Not finding what you are looking for?
1994 Ford Taurus Logo

Related Topics:

32 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...