Question about 1986 Nissan Pulsar

1 Answer

Engine either dies or revs high at stops-86 nissan pulsar

Sometimes will idle normally also

Posted by on

  • rocdroc Feb 26, 2009

    Engine revs very high when I start it and power cuts off when am driving it.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Its vacuum hose related. Mine does the same thing. Am looking for a vacuum hose diagram so I can take off the carb..... Check your vacuum hoses for leaks by spraying something like WD-40 on them and look for bubbles.

Posted on Apr 21, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why doesn't it continue running after start up?


Carburetor idle circuit is not working - carb needs to be cleaned and reset to restore normal operation.

Feb 14, 2016 | 1986 Nissan Pickup 4WD 1986

1 Answer

Nissan pulsar 1999, surging. Power and revs wave up and down quickly. What could this be?


  1. Fuel delivery problems (bad fuel pressure regulator, bad injectors, clogged fuel filter, etc.);
  2. Defective idle bypass (Idle Air Controller);
  3. Bad Throttle Position Sensor (TPS);
  4. Defective Engine Control Computer;
  5. Demonic purple gremlins from space (don't make them angry).

Jul 23, 2014 | Cars & Trucks

1 Answer

89 chevy s10 misfires and sputters when i give it gas, dies when i stop. Sometimes it runs fine, but recently it's just been bad. When i rev the engine it can stabilize the idle, but usually die


check fuel pump pressure- fuel filter --air filter --egr valve if carboned up clean or replace and cat converter feel the exhaust if feels restricted may be clogging up

Mar 30, 2013 | Chevrolet Blazer Cars & Trucks

1 Answer

2001 FORD F150 ENGINE SURGES AND DIES AT IDLE


Check all of your vacume lines. If it isn't a vacume line it is most likely the O2 sensor.

Apr 16, 2009 | 2001 Ford Crown Victoria

2 Answers

Have 1987 nissan sentra wagon 1.6 carb.engine the problem is an idle problem when I start in the morning or when its had time to cool down I depress the accelorator pedel to set the choke and high idle cam...


Check your Ignition timing before anything
check your plugs see what color they are
red or orange means carb is to lean , black
or oil means to rich then you can go from there
and set mixture screws on carb , let me no how you make out .

Mar 09, 2009 | 1987 Nissan Sentra Wagon

1 Answer

Fast idle


I have a similar problem which seems to stop ,if after 20 mins of driving or warmed up engine if you stop for 10 mins the revs die to a more normal 1500 revs! it is a spanish car now living in theUK I think the problem is choke related.

Oct 14, 2008 | 1988 Volkswagen Cabriolet

2 Answers

2004 stratus 2.7L Erratic idle, sometimes dies, sometimes revs at stops


hey-I have has this before different car but same - idle control valve is failing - computer at shop will pick this up on diagnostic

Oct 12, 2008 | 2004 Dodge Stratus

3 Answers

Car idles too high and dies


The later 80's accords have a problem with idling being to high at start up, even when the ambient air temp does not warrant it. I have had a 86 and now an 87 accord and both did that. I pretty much deal with it, being as you cant hardly replace indiv carb parts. Adjusting the idle will do nothing to stop it either. I took my 86 to a shop when I still had it and he fixed it, but I cant remember what all he did. I know he drilled a couple small holes in the choke plate. I think that the thermowax valve is bad, but again, you cannot find just a thermowax valve or anybody who knows what it is. Replacement carb in my area is about $450. Like I said, you might just have to learn to live with a high idle at start up.

Jun 30, 2008 | 1987 Honda Accord

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

286 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...