Question about 1997 Ford Expedition

1 Answer

Break lights and turn signal not work.

Parking lights work
all fuses are good

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,011 Answers

I assume it is a chevy replace the turn signal multifunction in the steering column.

Posted on Jan 25, 2009

  • mike loshbough
    mike loshbough Jan 25, 2009

    sorry i didn't see this was a ford still needs a multifunction switch alot of electrical runs through.this.i have replaced at least 25 of them

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Parking, tail and lic plate lights are not turning on. But the headlights, hazards and turn signal all work


On "most" vehicles, the parking, tail, lic plate AND dash lights are all on the same circuit. Usually, the fuse will be labeld "park", "tail", or "illum".
If you have dash lights but no park lights, it's likely that there is a break in the wiring somewhere...

Mar 15, 2014 | 2004 Lincoln Aviator

1 Answer

2003 ford crown victoria with working brake lights but no parking or rear lights


Duplicate the issue ? You mean the lights are working now ?
The turn signals and brake light circuit is one and the same. The parking lights are on a different circuit. The parking lights get power from the headlight switch and don't travel thru the turn signal switch.
So have you checked the park fuse for power ?
The location of the fuse should be in your owners manual.

Feb 15, 2014 | 2003 Ford Crown Victoria

1 Answer

My 74 MGB turn signals and break lights do not work. Fuse is good, bulbs are good. Gauges work, hazards work, parking lights work. Any suggestions?


I don't have repair info on a model that old, but the normal procedure is to follow the circuit from the brake light switch thru the turn signal switch and find out where you are loosing power.
Do the fuses have power ?

Feb 04, 2014 | Cars & Trucks

1 Answer

None of the blinkers work on my 1996 dodge stratus, all bulbs are good as the park lights and flashers work. I have three dead ports in fusebox under hood.


Guessed it's a V6. Trying to sort this out. If setting the headlamp switch to PARK turns on the park filaments of the front park/turn signal lamp and the tail filaments of the rear tail/stop lamps and the separate tail lamps, the park light circuit is good. If 20A fuse 6 in the power distribution center is OK, the combination flasher in the multifunction switch is receiving power. Power is directed to the turn signal lamps by operation of the turn signal/hazard warning switch. If the turn signals are not flashing, the combination switch may have failed or the turn signal flasher part of the combination flasher may have failed. Finally, the hazard warning switch causes the turn signal elements of the front combination park/turn signal lamps and the rear turn lamps to flash.

Sep 14, 2012 | 1996 Dodge Stratus

1 Answer

2005 suburban , the trailer harness wiring behind the plug in has power for the break and right turn but has no power for riding lights or left turn ?


Find the LEFT INSTRUMENT PANEL FUSE BLOCK. At the TURN SIGNAL/FLASHER MODULE, a 10A fuse (A9?) protects the right trailer stop/turn circuit (DK GRN) which you say is OK. Back at the S/FM, a 10A fuse (A8?) protects the LEFT trailer stop/turn circuit (YEL). At the UNDER HOOD FUSE BLOCK, a 15A TRL PARK fuse (B6?) protects the running/parking lights (BRN).

Sep 04, 2012 | 2005 Chevrolet Suburban

1 Answer

Why aren't my turn signals, brake lights, parking lights, dome lights and trunk light not working when the fuses are good?


A mechanic would check for power at the headlight switch and turn signal switch then go from there.
Might be a fuseable link in the engine compartment.

Jul 20, 2012 | Ford Cars & Trucks

1 Answer

Why both turn signals don't work


For the defroster:

Turn the defroster on and check for 12v at the connector on the window. If you have 12v, check for breaks in the element (the thin lines running across the window). If you do not have 12v and the fuse is good, the culprit will most likely either be the switch or the wiring.

For the right park light:

Check the bulb socket. You should have 12v at one terminal (with the park lights on) and ground at the other. If the voltage and ground are ok, you either have a bad bulb or possibly a bad socket. By bad socket I mean they can sometimes distort and not allow the terminals to make good enough contact.

Hope this was helpful.

Oct 20, 2011 | Cars & Trucks

3 Answers

Brake lights not working


Not even the third eye? then the fuse is blown or all the bulbs are out or the brake light switch on the break pedal is bad wire off or broken( it breaks right off the plug then crosses then blows the fuse as the loose broken wire hits the brake pedel arm. Test the break pedal switch first if the third eye doesesnt work either. no power with a test light the fuse is blown or the wire broke ( the wire goes straight to the switch from the fuse and doesnt go anywhere elese. the other wire if hot should light the lights. Most of these wont come out of park without this working as the wire also turns on the park release but some Fords the park release sticks released and Ford made em that way as they didnt like the brake to get out of park law. If the brake lights dont work maybe you ought not be able to get out of park anyway till its fixed. the switch is hot on both wires with the switch pused down and the lights dont still work go after the third eye first if the bulbs are bad change em before you do the rest of the work. on cars with yellow turn signals the brake lights all work on the same wire but red only use three wires, but you didnt say the turn signales didnt work if they work and they are red you r on the way to the turn signal switch as the brake switch powers the turn switch with power then it splites it fot the two lights and adifferent switch circuit for the front hooks them all together for hazard. yellow turns in the back or even separt bulbs can mean blown bulbs ther too its old enought for all the bulbs to fail and the runs still work.

Aug 14, 2009 | 1999 Ford Explorer

1 Answer

1996 carpice classic park lights fail


their is another fuse box in the engine compartment check that as well

Jan 23, 2009 | 1995 Chevrolet Caprice Classic

2 Answers

Turn Signal Not Working, But Parking & Back Brake Light Does


i would say try to replace the relay,(it should be in the fuse box) for the signals. if it's not that it could be the brain it's located in the colum of the steering unit.

Jan 06, 2009 | 2002 Ford Mustang

Not finding what you are looking for?
1997 Ford Expedition Logo

Related Topics:

58 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Ron Lankford

Level 3 Expert

5386 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...