Question about Dodge Shadow

1 Answer

Feul pump does not come on when key is turned on onmy 1994 dodge b250 van with 3.9 l v-6

There is nothing tagged as fuel pump in fuse block,does anyone know the location of fuse and relay?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Dodge Master
  • 21,873 Answers

The fuel pump relay gets power from a 30amp fuse that also powers the ASD relay. I think the fuse is marked with the letter D.
You may have to check the 30amp fuses to see if any are blown.
You can also jumper the pump relay.

Posted on Jan 18, 2013

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 383 Answers

SOURCE: fuel pump relay location

dfifrank: The relay you are seeking is locate on the driver's side of the car. The left kick panel or panel forward of the left front door pillar. There is a large box which is the ABS control unit.
There are two smaller relays with it. The relay mounted which is closest to the rear of the car is the fuel pump relay.
The relays in the fuse panel are as follows: the one to the extreme left which is located half way up the box is the ignition relay.
The one at the top right is the accessory relay and the one at the bottom right is the blower relay.
You have a pair of audio amp relay's located in the right lower kick panel and a flasher unit sometimes referred to as a relay, located further up closer to the firewall on the right kick panel.
I believe this should answer your questions and then some.
I service a lot of Maxima's consequently they are somewhat familiar to me.

Posted on Apr 18, 2009

  • 30 Answers

SOURCE: 1994 toyota fuel pump relay

Fuel pump relay is in the engine compartment left side fuse block

Posted on Jul 08, 2009

  • 1071 Answers

SOURCE: electrical Drawings for a 94 Dodge B250 Primetime conversion

there is no real diagram for the conversion vans you only have stock diagrams because glaval or primetime usually took the shells and made thier own interiors and yes i have seen alot of issues with these its a wonder im not bald just have to use basic electricity for the add ons they are not actually chrysler supplied items yes you can get them from chrysler but they order them from the other 2 companies that convert the vans

Posted on Jul 31, 2009

MNfisherman
  • 11896 Answers

SOURCE: 1992 Dodge Grand Caravan engine failure

There is not fuse for pump but a relay in the relay block. I do suggest jumping to see if pump turns on. Test voltage from ECM if needed. If voltage is to pump, then pump is shot. If not voltage, relay may be bad

Posted on Sep 11, 2009

  • 713 Answers

SOURCE: FUEL PUMP RELAY LOCATION

Fuel pump relay should be in the under hood fuse box. going to be a small relay about 1x1/2 long.

Posted on Oct 03, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

1994 Dodge Ram Van B250 Check Engine light doesn't come on, van won't crank, won't start....nothing when key is turned on It is not battery......buzzer and such does come on when key is turned on


I know you said it isn't the battery, forgive me, be sure the battery has a full charge and battery connections all good. Use a test lite and follow battery voltage. Battery ground is important also.
The battery voltage may lead to junction block--fusible links--fuse box?
At the fuse-box, pick any component that has a fuse, check fuse circuit for voltage, use a test lite. Some fuses are hot all the time, some go hot with key on, test both ways.
If the starter motor won't crank, check voltage and ground for the starter motor. Usually two voltage circuits at the starter motor, one comes from the battery, hot all the time. The other circuit goes hot with key in the crank position and is probably wired through the clutch or neutral switch then through the starter relay, where applicable, to the starter motor. The starter motor usually grounds through the engine block, so, battery negative connection is important.
Any testing at starter motor, make sure tranny is in park or neutral and functional parking brake is set. Safety is your responsibility. You don't want the vehicle to move during testing.

Apr 03, 2016 | Dodge Cars & Trucks

1 Answer

Drove van,parked, then it would crank but not start? I check the power to fuel pump, none. no power to injectors either I've change relays, sensors and power control module and still nothing, please h


Check your owners manual for a fuel shut off button/reset, normally found somewhere in the back interior of the van near the gas tank fill. If you still don't get power, try checking your fuses, make sure you check for two fuse panels....one maybe under the hood and one under the dash. Check them using a lighted probe on both sides of the fuse. Also Google 1994 dodge ram 3500 wiring diagram, much found when I did it! I hope this helps!

Sep 07, 2014 | 1994 Dodge Ram 3500

1 Answer

1994 dodge ram van wont start


need to narrow the field a little,1st check battery connections,turn headlights on @ turn key to start, if lights dim,,starter drawing amps,could be bad starter, is fuel pump humming when key on? if not check fuses under hood for fuel pump relay if ticks when key turned on it's good. it's either a spark or fuel issue, hope this helps!!

Aug 15, 2010 | 1993 Dodge Ram 250

1 Answer

Where can i download a free wiring for a 1988 dodge 250 ram van


I suggest visit and check autozone.com (free register) for 1988 Dodge Truck B250 3/4 ton Van 5.2L FI 8cyl, several wiring diagrams in there.

Hope helped (remember rated this) Good luck.

Feb 17, 2010 | 1994 Dodge Ram 2500

1 Answer

What transmision is in a 1990 dodge ram van b250 with a 318 moter?


You will have to refer to the id on the pan or on a tag on the transmission. There is the 727,904,and the 999.

Jan 12, 2010 | 1987 Dodge Ram Wagon B250

1 Answer

1994 dodge ram van b250. when warm, starts easily. when cold, will crank but not start. eventually, fuel pump kicks in and primes lines, starts rough, sputters, dies, then finally starts rough and runs...


Sounds like the fuel pump is going out. Its inside the tank. But first see if the fuel pump is clooged. take it off and see if its plugged. Check fuel pressure if you can. should be 45-55 psi

Oct 13, 2009 | Dodge Ram B250 Cars & Trucks

1 Answer

Changed feul pump feul filter changed computer. Van still shutdow


this could be a number of problems,check the voltage with a volt meter,not a test light at the fuel pump connection. make sure you have 12V,if so unhook the fuel supply line,turn key to ON not START, and make sure the pump will continue to flow,( obviously cqatch the fuel with a pail,or put a hose on it to pump it into a pail,don't let it leak all over the place.)if the pump continues to flow with out shutting off,your pump,filter,and electrical for your pump is ok.it could be a restriction in the return line,or the regulator may not be functioning.un hook the return line as close to engine as possible,install hose on it and route to a pail to catch fuel,with supply line hooked back up,start van and see if it works,if it keepd shutting off,you've now eliminated return line problems.check the regulator.

Oct 07, 2009 | 1996 Dodge Caravan

1 Answer

1992 Dodge Grand Caravan engine failure


There is not fuse for pump but a relay in the relay block. I do suggest jumping to see if pump turns on. Test voltage from ECM if needed. If voltage is to pump, then pump is shot. If not voltage, relay may be bad

Sep 11, 2009 | 1992 Dodge Grand Caravan

2 Answers

Dodge Ram B250 1994 - has a Starting Problem


if you van has a security system in it, it could be causing this problem. they usually disable the starter circuit. Paul has listed good places to start. but if they don't fix it do this: when your trying to start but its not working have some one check voltage at the starter. there are 3 points to check 1: where battery cable connects 2: where starter connects to solenoid 3: small wire that operates solenoid. if there is voltage at all three point replace starter it has a shorted / open spot on armature. voltage at 1 and 3 but not 2 replace solenoid. voltage at 1 but not at 3 and you have already checked the items Paul identified check wiring between neutral safety switch and solenoid.

May 15, 2008 | 1987 Dodge Ram Wagon B250

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

130 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8514 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...