Question about 2002 Dodge Grand Caravan

1 Answer

2001 dodge caravan code P0750 was looking at possible solutions came accross, low battery voltage. My battery ****'s, dies if I leave door open for 10 mins. have you heard of this before? do you t

2001 dodge caravan code P0750 was looking at possible solutions came accross, low battery voltage. My battery suck's, dies if I leave door open for 10 mins. have you heard of this before? do you think it may be the cause?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Dodge Master
  • 21,873 Answers

Code 750 should be for a problem with the low and reverse solenoid circuit in the transmission.
Have you had the battery tested ?

Posted on Jan 18, 2013

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 46 Answers

SOURCE: 2005 Dodge Grand Caravan - Battery Replacement

no as long as its not over 15 mins

Posted on Jan 14, 2009

emissionwiz
  • 76846 Answers

SOURCE: Battery replaced on 2001 grand dodge caravan now radio dont work

U will need to enter the radio anti theft code, this lock out was triggered by the loss of voltage to the radio during the battery change, this code is unique to each radio and cam in the owners information packet when the cat was sold new.

Posted on Apr 13, 2009

litoshop
  • 298 Answers

SOURCE: I have a 2001 Dodge Grand Caravan 3.3 and just put

Hi I'm litoshop these problems your having are from the transmission p0700 is the transaxle control and the 1776 is the solenoid latching back you have to go into data and test drive with scanner on data and see which is the solenoid is really making the problem good luck if this information has been useful please let us know thank you

Posted on Sep 03, 2009

emissionwiz
  • 76846 Answers

SOURCE: P0700, P0750 and P0755 codes

P0700 (M)
Check Transmission DTC's
This code indicates that the EATX (Transmission controller) has an active fault and has illuminated the MIL via a BUS message. The specific fault must be acquired from the EATX via a DRBIII tool. (Input or Output Speed Sensor failures often cause this code and are a common failure part on WJ Grand Cherokees

P0750
Shift Solenoid circuit.
Note: If code P1767 (Transmission Relay Always On) is also present: Replace transmission solenoid assembly. See note provided. When transmission is in limp mode the relay that provides power to the solenoid group is switched off. This is normal and is designed to provide operation in one gear only. Engineering department suggests to replace transmission solenoid assembly anytime these two trouble codes occur together. See applicable service manual section (21) for solenoid assembly replacement directions. IMPORTANT: When performing this repair always check torque on all valvebody accumulator cover plate screws. Proper torque specification is 70 inch pounds. If any accumulator cover plate screws are damaged or missing replace the valvebody assembly. NOTE: If any other trouble codes are present do not replace solenoid assembly. See test in the applicable Transmission Diagnostic Procedures Manual

P0755
Shift Solenoid B

Posted on Oct 14, 2009

rlandis8
  • 16 Answers

SOURCE: i have code P0750 and HOW I REPAIR this?

Sounds to me like a solenoid. I believe thats the low reverse solenoid which if I'm not mistaken would allow your durango to kick into Overdrive. They run about $125 and you need to drop the pan on the tranny after draining the fluid and disconnect the wiring and remove the old one and do the reverse to put it back together with a new seal, and you might as well change the filters too (durango has 2). Fill it with ATF-4 fluid, 6 quarts i think and you should be good to go.

Posted on May 01, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2011 dodge grand caravan engine malfunction light keeps coming on. Dealer traced it to a bad battery, had a new one installed and codes disappeared. Now light is back on. Codes P0740/P0562 show up


P0740 torque converter malfunction
Possible causes
Low or dirty transmission fluid
Faulty torque converter clutch solenoid valve
Torque converter clutch solenoid valve harness is open or shorted
Torque converter clutch solenoid valve circuit poor electrical connection

P0562 charging system voltage low
Possible causes
Low battery charge
Defective battery
Faulty alternator
Problem with belt
Open or shorted system voltage circuit

Jul 04, 2016 | 2011 Dodge Grand Caravan

1 Answer

Tried to fix power window in door and now van won't crank.


dead battery or low voltage try charging the battery

Oct 01, 2012 | 2001 Dodge Caravan

1 Answer

2003 dodge caravan storing code p206


Hi there:
P0206 means that the PCM detected a fault in the injector or the wiring to the injector. It monitors the injector and when the injector is activated, the PCM expects to see the voltage pulled "low" or close to zero. When the injector is switched off, the PCM expects to see a voltage that is close to battery voltage or "high". If it doesn't see the expected voltage the PCM will set this code. The PCM also monitors resitance in the circuit. If the resistance is excessively low or high it will set this code.

The symptoms for this code will likely be a misfire and a rough running engine. Poor acceleration. The MIL will also be illuminated.

The causes of a P0206 engine light code could be any of the following:
- Bad injector. This is usually the cause of this code but doesn't rule out the possibility of one of the other causes
- Open in the wiring to the injector
- Short in the wiring to the injector
- Bad PCM

First, using a DVOM check the resistance of the injector. If it isn't within specs, then replace the injector.

Check for voltage at the fuel injector connector. It should have 10 volts or more.
Visually check the connector for damage or broken wires.
Visually check the injector for damage.

If you have access to an injector tester, activate the injector and see if it operates. If the injector operates, then you likely have either an open in the wiring, or a blocked injector. If you do not have access to a tester, swap the injector with another one and see if the code changes. If the code changes, then change the injector.

At the PCM, remove the driver wire from the PCM connector and Ground the wire. (Make sure you have the correct wire. If you're not sure, do not attempt) The injector should activate
Replace the injector

Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

May 24, 2012 | 2003 Dodge Caravan

1 Answer

P206 code stored on my2003 dodge caravan


Hi there:

P0206 means that the PCM detected a fault in the injector or the wiring to the injector. It monitors the injector and when the injector is activated, the PCM expects to see the voltage pulled "low" or close to zero. When the injector is switched off, the PCM expects to see a voltage that is close to battery voltage or "high". If it doesn't see the expected voltage the PCM will set this code. The PCM also monitors resitance in the circuit. If the resistance is excessively low or high it will set this code.




The symptoms for this code will likely be a misfire and a rough running engine. Poor acceleration. The MIL will also be illuminated.





The causes of a P0206 engine light code could be any of the following:
- Bad injector. This is usually the cause of this code but doesn't rule out the possibility of one of the other causes
- Open in the wiring to the injector
- Short in the wiring to the injector
- Bad PCM




First, using a DVOM check the resistance of the injector. If it isn't within specs, then replace the injector.

Check for voltage at the fuel injector connector. It should have 10 volts or more.
Visually check the connector for damage or broken wires.
Visually check the injector for damage.




If you have access to an injector tester, activate the injector and see if it operates. If the injector operates, then you likely have either an open in the wiring, or a blocked injector. If you do not have access to a tester, swap the injector with another one and see if the code changes. If the code changes, then change the injector.




At the PCM, remove the driver wire from the PCM connector and Ground the wire. (Make sure you have the correct wire. If you're not sure, do not attempt) The injector should activate
Replace the injector




Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

May 24, 2012 | 2003 Dodge Caravan

1 Answer

Code p0203


P0203 - Cylinder 3 Injector Circuit Malfunction

P0203
means that the PCM detected a fault in the injector or the wiring to the injector. It monitors the injector and when the injector is activated, the PCM expects to see the voltage pulled "low" or close to zero. When the injector is switched off, the PCM expects to see a voltage that is close to battery voltage or "high". If it doesn't see the expected voltage the PCM will set this code. The PCM also monitors resitance in the circuit. If the resistance is excessively low or high it will set this code.

The symptoms for this code will likely be a misfire and a rough running engine. Poor acceleration. The MIL will also be illuminated.

The causes of a P0203 engine light code could be any of the following:
Bad injector. This is usually the cause of this code but doesn't rule out the possibility of one of the other causes
Open in the wiring to the injector
Short in the wiring to the injector
Bad PCM

Hope this helps and just keep in mind that your feedback is important and I'll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa.
Jose.

Oct 23, 2011 | 2001 Dodge Ram 2500 Truck

2 Answers

Have a 1998 dodge caravan with service engine soon light still on after fixing code 205 and 206. Tried to reset it but the light will not go off. I need to pass emissions soon. What do I need to do.


The symptoms for this code (both) will likely be a misfire and a rough running engine. Poor acceleration. The MIL will also be illuminated. The causes of a P0206 engine light code could be any of the following:
* Bad injector. This is usually the cause of this code but doesn't rule out the possibility of one of the other causes
* Open in the wiring to the injector
* Short in the wiring to the injector
* Bad PCM

Your possible solutions, first, using a DVOM check the resistance of the injector. If it isn't within specs, then replace the injector.
* Check for voltage at the fuel injector connector. It should have 10 volts or more.
* Visually check the connector for damage or broken wires.
* Visually check the injector for damage.

Also, if you have access to an injector tester, activate the injector and see if it operates. If the injector operates, then you likely have either an open in the wiring, or a blocked injector. If you do not have access to a tester, swap the injector with another one and see if the code changes. If the code changes, then change the injector.

At the PCM, remove the driver wire from the PCM connector and Ground the wire. (Make sure you have the correct wire. If you're not sure, do not attempt) The injector should activate
* Replace the injector

Hope helps.

Aug 08, 2011 | 2001 Dodge Caravan

2 Answers

MY 2002 DODGE GRAND CARAVAN TRANSMISSION ONLY RUNS IN THE THIRD AND REVERSE SHIFT POSITIONS. I CODE TESTED THE VEHICLE AND IT DISPLAYED P0750 WHICH ACCORDING TO RESEARCH INDICATES A PROBLEM WITH THE SHIFT...


  • What has happened is your transmission solenoid pack has gone bad. Not to worry, this is an easy fix.

  1. You need to purchase a transmission solenoid pack and a gasket.
  2. You can take your chances with a salvage yard or you can get one off of e-bay for about half of what the dealer will charge you or you can go to the dealer.
  3. Pop your hood and look on the top of the transmission. That little black box is the transmission solenoid.
  4. Clean the area around the solenoid real well with a shop rag.
  5. Remove the connector hooked onto the solenoid.
  6. You may have a linkage to pop off.
  7. Now remove the long bolts holding it into the transmission.
  8. Now wiggle the solenoid out.
  9. Reverse to finish.
  • That's it. Real easy fix for this vehicle.

Regards, Tony

Apr 27, 2011 | 2002 Dodge Grand Caravan

1 Answer

Battery doesn't charge. I have checked the cables from the battery to the alternator. They ohm out ok. The alternator was tested and is good. I have checked the voltage at the alternator and it is the same...


The battery on a Dodge Caravan is subject to the same drainage issues every conventional automobile battery has. If the alternator does not produce enough current to recharge the battery, it will lose its charge over time. If the voltage regulator is not functioning properly it can impair the ability of the battery to stay charged. If the operator leaves the headlights on, or the door open or any number of other accessories that draw electricity from the battery while the engine is not running, the battery will eventually die. Loose battery cables can also keep the alternator from supplying current back to the battery
the votage regalator usally is first to go out. thanks

Oct 27, 2010 | 1994 Dodge Caravan

2 Answers

P0700, P0750 and P0755 codes I was driving at 65 mph and the 2003 Dodge Caravan down shifter to low gear and the check engine light came on. It will not ship to high gear.


P0700 (M)
Check Transmission DTC's
This code indicates that the EATX (Transmission controller) has an active fault and has illuminated the MIL via a BUS message. The specific fault must be acquired from the EATX via a DRBIII tool. (Input or Output Speed Sensor failures often cause this code and are a common failure part on WJ Grand Cherokees

P0750
Shift Solenoid circuit.
Note: If code P1767 (Transmission Relay Always On) is also present: Replace transmission solenoid assembly. See note provided. When transmission is in limp mode the relay that provides power to the solenoid group is switched off. This is normal and is designed to provide operation in one gear only. Engineering department suggests to replace transmission solenoid assembly anytime these two trouble codes occur together. See applicable service manual section (21) for solenoid assembly replacement directions. IMPORTANT: When performing this repair always check torque on all valvebody accumulator cover plate screws. Proper torque specification is 70 inch pounds. If any accumulator cover plate screws are damaged or missing replace the valvebody assembly. NOTE: If any other trouble codes are present do not replace solenoid assembly. See test in the applicable Transmission Diagnostic Procedures Manual

P0755
Shift Solenoid B

Oct 14, 2009 | 2003 Dodge Caravan

1 Answer

1997 dodge caravan shifting problems have codes p700 and po750


p0700 is indicating a trans fault present..p0750 is low-reverse solenoid circuit..most likely defective solenoid pack on front of transmission..300-400 dollar part

Jun 10, 2009 | 2003 Dodge Neon

Not finding what you are looking for?
2002 Dodge Grand Caravan Logo

216 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...