Question about 2003 Chevrolet Tahoe

2 Answers

Left hand signal lights do not work!

Right hand turn signal lights work fine,you can hear the flasher clicking. When signaling left one click is heard and the lights do not work. When the warning lights a activated only the right lights work. All fuses are good. Could the flasher be the problem to only let the right hand side work and not the left?

Posted by on

  • tricky_warri
    tricky_warri Jan 20, 2013

    The flasher module was the problem.

  • tricky_warri
    tricky_warri Jan 21, 2013

    The flasher module was the problem!

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

Yes but first check the bulb

Posted on Jan 18, 2013

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

It is most likely that the bulbs are burnt out and if not have an auto electrician check on it for you.

Posted on Jan 18, 2013

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 4 Answers

SOURCE: 99 Chevy Tahoe... Rear turn signals, brake lights, and hazards

I had this problem, and to be honest, it happened to the left side about a week later...it's the board that the bulbs plug into...it's a very common problem with this model. So popular that you can normally get the socket board off the shelf at a parts store! it's extremely simple to replace, and I replaced all the bulbs at the same time!

Posted on Oct 11, 2009

  • 51 Answers

SOURCE: 1997 cavalier turn signals

Your left turn signal relay might be out, if i remember correctly, it's located in the fuse box, and is as easy as changing a fuse. If it isnt in the fuse box under your dash then check under the hood, possibly near the battery.

Posted on Feb 01, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 1987 chevy deluxe r10 dont have any turn signal I have head light brake lights park light an hazard lights but no right turn signal nor left turn signal I have check all fuses and put a new signal...


I think you might have a separate flasher for the turn signals under the dash. The turn and hazard flasher would look alike. Turn you hazards on and find the flasher for it under the dash. You will probably be able to feel it working and hear it clicking. The other flasher under the dash is for the turn signals. Try replacing that one. I think it was in later years they began to combine the two into a single composite flasher.

Mar 01, 2013 | Chevrolet Cars & Trucks

1 Answer

Dodge ram 1500 2007 turn signal malfuction


Good job, and good joe to you for solvin it! Now you'll remember that's a common indicator of a burnt out bulb. For some reason I can't explain, that is how a bad bulb acts on the flasher unit - by more rapid clicking (breaking contact inside the flasher relay at a quicker rate). It seems both the front and rear signal lights have to be working for the normal flasher rate ...well good.

Aug 22, 2012 | Dodge Cars & Trucks

2 Answers

Turn signals aren't working but flashers are


that is because they run off different systems, they both have thier own relays, normally the common fault with flashers not working is either, fuse, or relay (flasher repeter unit), if you turn your turn signals left or right can you hear a click click click noise? if not its your flasher unit, hope this helps

Feb 01, 2010 | 1994 Chevrolet S-10 Blazer

3 Answers

97 olds 88, left turn signal not blinking.


possibly one side of your signal flasher is out turn on emergency flashers to locate one flasher then you can locate the other

Sep 12, 2009 | 1997 Oldsmobile 88

1 Answer

No left turn signal


CHECK ALL BULBS, SOME HAVE A SLIGHT DARK SPOT ON THE BULB AND IS BAD AND FLASHER COULD ALSO BE BAD. CHECK THE FUSES TOO.

Jun 10, 2009 | 2002 Pontiac Bonneville

1 Answer

Left flasher dead, right on works


double check your bulbs again, if still good
check your flasher

G

May 09, 2009 | 2005 Jeep Wrangler

1 Answer

91 toyota corolla left turn signal stays lit up al the time. Right turn signal working okay. Bulbs for left ok. where is the turn signal flasher located for this model or is it not the flasher,s problem....


If the right side signals are working properly and you can hear the signal flasher clicking when the right side signals are selected, the flasher is not the problem. Its more likely you have a short to ground in the left side wiring somewhere.

Feb 21, 2009 | 1990 Toyota Tercel

Not finding what you are looking for?
2003 Chevrolet Tahoe Logo

228 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...