Hold light flashing on mazda familia 323 1999

SOURCE: ABS, Traction control and handbrake

I have a Mazda Capella (626) 1998 and had similar problem other than it was running on 4 cylinders and the hand brake light was not on but speedometer was not functioning and the ABS light was on. The rear ABS senssor was the problem.
SDM

SOURCE: mazda 323 familia automatic is not changing gears only 1,2 and R

hi

it seems that the gear bushings have worn out. you need to take your car to a mechanic to have the bushings changed. Also, please check it your car has enough Automatic Transmission Fluid.

i am always here
kind Regards
RAhUL_hunk

SOURCE: Mazda Millenia 1997...flashing hold light when

you mean check engine light flashing??? if so then the engine is skipping and the lack of power putput will cause the trans to change gears constantly. is this the issue you describe?

Testimonial: "Thankyou for taking the time to answer my questions....cheers"

SOURCE: 1989 mazda familia interplay, park light fuse 10

check the earth on ur headunit it may be earthd to the rong thing

SOURCE: 1997 Mazda 323 Familia a/t wont run immediately

Sorry buddy, but the selunoids valves are not good, when you remove the trans filter you will find. A good mechanic could do the job because if you do not install the wires properly it will be a mess.