Question about 2006 Peugeot 207 1.4

Open Question

Cylinder head bolt torque for 1.4, 8 valve peugeot 207(2008)

Torque for cyl head bolts

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 2 Answers

SOURCE: Head bolt torque settings for peugeot 206 1100cc

haynes manual

Posted on Jun 16, 2009

Ad
  • 127 Answers

SOURCE: Torque setting for peugeot 206

hallo
If you have normal 1.6 liter 206:
max bolt lenght:176,5mm
20Nm and aditional 240°

1,6 liter 16valve engine
max bolt lenght:122,6mm
20Nm and aditional 260°

Marko

Posted on Sep 26, 2009

  • 205 Answers

SOURCE: cylinder head bolts torque settings for 1.9 diesel

I need to know the engine code: but check this manual may be it can help you:
http://www.gigasize.com/get.php?d=dqhcy07n46b

Posted on Oct 18, 2009

  • 4 Answers

SOURCE: cylinder head bolt torqe settings on peugeot 206

bolt length 147mm. stage 1, 15nm, stage 2,50nm, 3 slacken off 360 degree, 4 tighten 20nm,5,285 nm, hope this helps, ive checked this on auto data so settings are correct, do it in 5 stages starting from centre and working in a clockwize direction.

Posted on Dec 14, 2009

  • 15 Answers

SOURCE: what is the size of socket i need for the hub bolt peugeot 407

36mm

Posted on Apr 19, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How much torque for each head bolt in a 2004 Dodge ram 1500 3.7 liter


Install the cylinder heads. Use new gaskets and tighten the bolts, in sequence, as follows:
  1. Step 1: Bolts 1-8 to 20 ft. lbs. (27 Nm)
  2. Step 2: Bolts 1-10 verify torque without loosening
  3. Step 3: Bolts 9-12 to 10 ft. lbs. (14 Nm)
  4. Step 4: Bolts 1-8 plus 1 / 4 (90 degree) turn
  5. Step 5: Bolts 9-12 to 19 ft. lbs. (26 Nm)


26002143-2qxw3km0vcnqu3setvnduoab-2-1.gif

Dec 10, 2015 | Dodge Cars & Trucks

1 Answer

4 cylinder D C head bolt pattern


Head bolts 4cyl size type 2.5? I see oil! - JeepsUnlimited

www.jeepsunlimited.com/forums/showthread.php?...Head-bolts-4cyl...
Mar 7, 2005 - 9 posts - ‎4 authors Could someone tell me the size and type of the cyl. head bolts on a ... So I'm thinkingDC didn't torque the cyl head bolts right and I'll have to check them. .... my 4 banger a couple of years ago after I had the head off to replace ...

Sep 19, 2015 | Cars & Trucks

1 Answer

What is the valve clearance and head bolt torque on a nissan td27 engine 1996 model


valve clearance is .014 inch for intake and exhaust with engine warm.
head torque it 21 ftlbs, then 44 ftlbs, then loosen all, torque to 89 inchlbs, then to 21ftlbs, then mark and turn the bolts an additional 60 to 65 degrees.
cyl head sub bolts torque 80 to 100 inchlbs.
thanks.

Jan 13, 2011 | 1990 Nissan Hardbody King Cab

1 Answer

Cylinder head bolt torque specs for 2000 Cadillac catera 3.0L 6 cyl


YOU NEED NEW HEAD BOLTS OLD HEAD BOLTS BEEN STRETCHED. YOU HAVE TORQUE HEAD BOLTS IN FIVE PASSES. FIRST PASS TORQUE HEAD BOLTS 18 FT LBS. SECOND PASS ADD ADDITIONAL 90 DEGREES.THIRD PASS ADD ADDITIONAL 90 DEGREES.FOURTH PASS ADD ADDITIONAL 90 DEGREES.FIFTH PASS ADD 15 DEGREES.

Dec 22, 2010 | 2000 Cadillac Catera

1 Answer

I AM DOING THE HEAD GASKET ON 1999 SAAB 95 4 CYL I NEED THE TORQUE SPEC ON CYL. HEAD


Torque spec

Step 1- 44 Ft.Lbs.
Step 2- 59 Ft.Lbs.
Step 3- Tighten bolts an additional 90 degrees.

Here the head bolt's tightening sequence.

bcas1298_1.gif

Nov 11, 2010 | Saab 9 5 Cars & Trucks

1 Answer

Whats the torque for the head bolts for a 1987 chvey s10


It depends on what engine you have....if its a 4 cyl.2.5L start from the centre and work your way out in a clockwise position...first torque pass all bolts to18 ft/lbs second pass 27 ft/lbs then the 3rd pass all bolts to 90 degrees...or 1/4 turn.
If its a 6 cyl 2.8 engine all head bolts same way clocwise from the centre..to 70 ft/lbs have fun..

Nov 26, 2009 | 1985 Chevrolet Chevy

1 Answer

1986 Mustang 3.8L cyl. head torque.


The aluminum heads on a cast iron block require some gentle torque procedures.... It may not be necessary - but I suggest that you start near the center of the head and work out with each tightening step. This will ensure that you don't put too much pressure on a single portion of the head. The standard proceedure for the 3.8 V6 up until 1994 is as follows:
You will have some long and some shorter head bolts. Place a small mark on the long bolts to identify them during the final torque proceedure.

Step 1: 15 (on all bolts)
Step 2: 29 (on all bolts)
Step 3: 37 (on all bolts)
Step 4: Now, starting near the center of the head, loosen a single head bolt about 2 turns. Now, torque it down to about 15 (+/- 3 lbs) IF A LONG BOLT.
OR 11 (+/- 3 lbs) IF A SHORT BOLT.
Step 5:
After all bolts are set as described above, ....go over them 1 more time, starting near the center of the head and pull each bolt down another 1/4 turn (90 degrees).
You are done!!

Oct 10, 2009 | 1986 Ford Mustang

1 Answer

Torque setting for intake manifold, head bolt and exhaust manifold1992 ford explorer


what engine do you have? the 4.0l push rod engine = in/manifold 15-18ft-lb, cyl.head bolts=stp1:44ft-lb stp2: 59ft-lb,stp3: + 90 degrees, ex/manifold = 15-18 ft-lb. the 4.0l sohc.engine = in/manifold107-123 in-lb,cyl.head bolt 8mm=23-25ft-lb,12mm=26 ft-lb+90 degrees+90 degrees,ex/manifold= 15-18 ft-lb. and the 5.0l =in/manifold=24ft-lb,cyl.head=stp1:30ft-lb stp2: 50ftlb,stp3: +90 degrees, ex/manifold=30 ft-lb

Oct 09, 2009 | 1992 Ford Explorer

2 Answers

Head bolt torque spec


Always use new head bolts.
1)tighten to 40ft/lbs
2)back off 1/2 turn
3)tighten back to 40ft/lbs
4)tighten an additional 90 degrees
5)tighten an additional 90 degrees.

Aug 16, 2009 | 1999 Ford Escort

4 Answers

Head bolts torque settings


According to my haynes manual for G-S reg, 1989-1998 it goes as follows,
Stage 1:- Tighten all bolts by hand until bolt heads just contact cyl. head.
Stage 2:-Tighten all bolts to 40Nm or 30lb ft.
Stage 3:-Angle tighten all bolts a further 60 degrees.
Stage 4:-Angle tighten all bolts again a further 60 degrees.
Stage 5:- M12 x 140mm bolts ONLY angle tighten a further 20 degrees.
Hope this helps everyone, sorry it seems longwinded but that is how it's written in the manual.

Oct 26, 2008 | 1995 Land Rover Discovery

Not finding what you are looking for?
2006 Peugeot 207 1.4 Logo

Related Topics:

312 people viewed this question

Ask a Question

Usually answered in minutes!

Top Peugeot Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

mike hayward

Level 2 Expert

279 Answers

lloyd cole

Level 2 Expert

250 Answers

Are you a Peugeot Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...