Question about Cars & Trucks

Open Question

1978 FOED F150 TORQUE SPECS STEERING SPECS - Cars & Trucks

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

chuck943
  • 783 Answers

SOURCE: torque specs foe 4.9 ford f150 flywheel

75-85 ft lbs

Posted on Mar 04, 2009

sirgabe51
  • 66 Answers

SOURCE: I have 4.9L6 need torque specs for cylinder head

for cylinder head the torque is : step 1 55 ft-lb, step 2 65 ft-lb, step 3 85 ft-lb. Rocker arm stud nut or bolt is 17 to 23 ft-lb. and valve cover bolt 72 to 108 in-lb.


e023442.jpg

Posted on Dec 05, 2009

tneubauer
  • 437 Answers

SOURCE: need torque spec for 2003 F150 9.75 differential

77 ftlbs

I am assuming you have the run out and backlash all ready set.

Posted on Jan 17, 2010

emissionwiz
  • 75108 Answers

SOURCE: WAT IS THE TORQUE SPECS ON THE FRONT SPINDLE NUT

U DON'T TOQUE A SPINDLE NUT!!! JUST TIGHTEN WITH PLIERS AND INSTALL COTTER PIN.

Posted on Mar 09, 2010

jturcotte
  • 7772 Answers

SOURCE: 1997 ford f150 4.6 4 wheel drive torque spec for

from autozone.com:

  1. Tighten the cylinder head bolts in the sequence shown in three steps, as follows:
    1. Step 1-27-31 ft. lbs. (37-43 Nm).
    2. Step 2-tighten an additional 85-95 degrees.
    3. Step 3-tighten another 85-95 degrees.

Fig. Fig. 9 Tighten the cylinder head bolts in three steps using the sequence shown-4.6L and 5.4L engines

30f15b8.gif

Posted on Sep 21, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1978 Chevy pickup wheel alignment specs


That needs to be done on a machine and all the components of the front end checked for wear, also tweets to the specs may be needed to attain the desired results of a straight steering vehicle.

Aug 03, 2016 | Cars & Trucks

1 Answer

What is the torque spec for a 1978 Ford pinto differential pinion nut?


170 ft.lbs is the minimum; be aware that this differential uses a crush sleeve to set the backlash and the pinion torque is what crushes the crush sleeve. If you don't set the backlash correctly you can grind up your differential gears.
8 Inch Ford Rear End Torque Specifications eHow

Feb 02, 2015 | Ford Cars & Trucks

1 Answer

I need the head bolt torque specs for a 1978 honda cb400tii motorcycle


You may have this posted in the wrong product category. Please select another category appropriate to the problem and re-post the problem so the correct expert will see and respond to the question..

Sep 07, 2012 | Cars & Trucks

1 Answer

2000 f150 5.4 triton rod caps and main cap torque spec


Well I did what the book said and I couldn't turn the crank at all

Apr 06, 2012 | 1995 Ford F150 Styleside Regular Cab

1 Answer

Torque specs for rod & main brgs for 1994 ford f150, 300 6 cyl fuel inj engine


Main Bearing Cap Torque:
Torque in 2 steps: Step 1: torque to 35 Ft/Lbs Step 2: torque to 70 Ft/Lbs

The Rod Bearing Cap Torque: 45 Foot pounds (Final torque)

Was this what you needed...let me know by your rating of me...thanks!

Sep 17, 2011 | 1994 Ford F150 Styleside Supercab

1 Answer

Need exploded view of power steering gearbox for 1975 ford f-150


REMOVAL & INSTALLATION Fig. 1: Power steering gear installation1980 and Later 85768076.gif
Fig. 2: Intermediate shaft-to-steering column upper joint connection. Remove the pinchbolt shown to disconnect. 1978 Bronco w/power steering shown 85768077.jpg
Fig. 3: Intermediate shaft-to-steering gear joint connection. Remove the pinchbolt shown to disconnect. 1978 Bronco w/power steering shown 85768078.jpg
  1. Raise and support the front end on jackstands.
  2. Place the wheels in the straight-ahead position.
  3. Place a drain pan under the gear and disconnect the pressure and return lines. Cap the openings.
  4. Remove the splash shield from the flex coupling.
  5. Disconnect the flex coupling at the gear.
  6. Matchmark and remove the pitman arm from the sector shaft.
  7. Support the steering gear and remove the mounting bolts.
  8. Remove the steering gear. It may be necessary to work it free of the flex coupling. To install:
  9. Place the splash shield on the steering gear lugs.
  10. Slide the flex coupling into place on the steering shaft. Make sure the steering wheel spokes are still horizontal.
  11. Center the steering gear input shaft with the indexing flat facing downward.
  12. Slide the steering gear input shaft into the flex coupling and into place on the frame side rail. Install the flex coupling bolt and torque it to 30 ft. lbs.
  13. Install the gear mounting bolts and torque them to the specifications shown in the Torque Chart at the end of this Section.
  14. Make sure that the wheels are still straight ahead and install the pitman arm. Torque the nut to the specifications shown in the Torque Chart at the end of this Section.
  15. Connect the pressure, then, the return lines. Torque the pressure line to 25 ft. lbs.
  16. Snap the flex coupling shield into place.
  17. Fill the steering reservoir.
  18. Run the engine and turn the steering wheel lock-to-lock several times to expel air. Check for leaks.
prev.gif next.gif

Aug 21, 2010 | Ford F-150 Cars & Trucks

1 Answer

I need head bolt torque specs. for a 2002 ford f150 v6


Torque Specifications for Ford 4.2L-256ci-V6
These bolts are torque and turn procedure!
STEP 1: 14 FtLbs STEP 2: 29 FtLbs STEP 3: 36 FtLbs STEP 4: LONG Bolts Loosen 3 Turns - re-torque to 33FtLbs STEP 4: SHORT Bolts Loosen 3 Turns - re-torque to 19FtLbs STEP 5: ALL Bolts +180deg turn

Aug 05, 2010 | 2002 Ford F150 Regular Cab

1 Answer

Torque specs


hi,
Main Bearing Cap Bolts 75-85 56-62
Connecting Rod Cap Nuts 31-39 23-28

Jul 05, 2009 | 1997 Ford F150 Regular Cab

3 Answers

Need torque specs


Torque sequence:
Step 1: Torque 29 to 34 Ft/Lbs
Step 2: Torque an additional 90 to 120 degrees

Oct 14, 2008 | 1997 Ford F150 Regular Cab

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

27 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...