Question about Suzuki Cars & Trucks

Open Question

Head torque settings g16a 16v - Suzuki Cars & Trucks

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 397 Answers

SOURCE: Motor g16A 16V, Borken cam belt, has it bent the valves ?

Do not attempt to start the engine under any circumstances until you have carried out a few tests. IF you dont have valve damage replacing the belt and trying to start the engine could cause serious further damage.
Replace the belt and make sure the timing is perfect, you might need to rock the pistons back and forth via the crank pulley in order to fit the belt if the pistons come into contact with a valve or two. Once you have the belt fitted and the timing right remove the spark plugs and slowly turn the engine over by hand, not with the starter motor. With the valve cover removed and with someone turning the engine by hand you should be able to see any valves that are not operating correctly. If any thing doesn't look right then you will have to investigate further by removing the cylinder head.

Posted on Aug 24, 2008

Ad
TDISLine
  • 1874 Answers

SOURCE: need torque settings for cylinder

Torque settings for cylinder head bolts for Skoda Fabia 1.4 16v

Cylinder head bolts tightening order:

tdisline_116.jpg

IMPORTANT NOTE: RENEW BOLTS!

Stage 1: Tightening torque = 30 Nm
Stage 1: Tightening torque = 90 Degrees
Stage 1: Tightening torque = 90 Degrees

Please do rate my response. Thanks!

Posted on Dec 18, 2010

TDISLine
  • 1874 Answers

SOURCE: what is the cyl head

Cylinder head instructions

tdisline_358.jpg
Cylinder head torque setting for 2005 VW Golf 1.4 FSI
Renew bolts
Stage 1 = 30 Nm
Stage 2 = 90 degrees
Stage 3 = 90 degrees

Posted on Mar 24, 2011

TDISLine
  • 1874 Answers

SOURCE: TORQUE SETTINGS FOR 1.4 16V

Cylinder head instructions

Tightening sequence
tdisline_536.jpg
Cylinder head torque setting for 2004 VW 1.4L 16V fitted in Seat Leon
Renew bolts

Stage 1 = 30 Nm
Stage 2 = 90 degrees
Stage 3 = 90 degrees

Posted on May 17, 2011

emissionwiz
  • 76164 Answers

SOURCE: cylinder head tightening sequence for ford mondeo 1.8i zetec petrol

Go to this LINK for the info in pdf format, the sequence is on page 16 of the pdf file.

Posted on Feb 16, 2012

Testimonial: "Great help...just the info I needed to do job. Thankyou very much."

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need the torque setting for my citreon 1.8 16v cylinder head petrol


If you buy head gasket the setting will be included. I believe you will torque to a given torque then tighten a further angle (probably 120degrees.)

Jan 26, 2015 | 2004 Citroen Xsara Picasso

1 Answer

How do I replace the head gasket on a 1992 tracker


new head , page
fsm covers it
alldata.com covers it
as does free fsm
and here.
best.
http://www.fixkick.com/engine/head-pull/head-pull.html

which engine, the 8v and 16v have different theds.
G16a is 8v , G16B is 16valve MPI engine.

hint do not lose the head locking pins, in corners. or the belt
will never ever run true after.
done many

May 05, 2014 | Geo Tracker Cars & Trucks

1 Answer

How to replace suzuki g16b head on g16a block


the mounts are the same.
Is this a EFI car or CARB , you never said.
IF EFI"
but your 8v ECU will never run any 16v HEAD
the G16B ,means 16v in non USA countries, (only clue yet)
and has a unique ECU, and all harness in dash and motor.
the head is unique, 8 more valves, and 4 injectors not 1.
and has unique intake and exhaust header.
the 16v block has unique pistons with 4 cuts on top. 8v blocks
dont work with 8v heads and reverse. short of fly cutting.

the block casings are the same. and crank, and bearings.

no year stated or county but in Europe they have up to 8 engine types and many with carbs up until 2001 or even later..

the old mounts bolt to the block perfect due to blocks is same.

Jun 28, 2013 | Suzuki Cars & Trucks

1 Answer

TORQUE SETTINGS FOR 1.4 16V 04 VAG ENGINE THEY USED IN SEAT LEON 04 16V 1.4.


Cylinder head instructions

Tightening sequence
tdisline_536.jpg
Cylinder head torque setting for 2004 VW 1.4L 16V fitted in Seat Leon
Renew bolts

Stage 1 = 30 Nm
Stage 2 = 90 degrees
Stage 3 = 90 degrees

May 17, 2011 | 2000 Volkswagen Golf

1 Answer

What is the cyl head torque setting for 05 vw golf 1.4 fsi 16v


Cylinder head instructions

tdisline_358.jpg
Cylinder head torque setting for 2005 VW Golf 1.4 FSI
Renew bolts
Stage 1 = 30 Nm
Stage 2 = 90 degrees
Stage 3 = 90 degrees

Mar 23, 2011 | Volkswagen Golf Cars & Trucks

1 Answer

Need torque settings for cylinder head bolts on a 52 reg skoda fabia 1.4 16v any help much appreciated thanks


Torque settings for cylinder head bolts for Skoda Fabia 1.4 16v

Cylinder head bolts tightening order:

tdisline_116.jpg

IMPORTANT NOTE: RENEW BOLTS!

Stage 1: Tightening torque = 30 Nm
Stage 1: Tightening torque = 90 Degrees
Stage 1: Tightening torque = 90 Degrees

Please do rate my response. Thanks!

Dec 17, 2010 | Volkswagen Polo Cars & Trucks

2 Answers

Angle Torque settings head bolts


Use new bolts, tighten in the following stages 1. 20Nm 2. 100Nm 3. wait 3 mins 4. slacken bolts 1&2 retighten to 20Nm +110 degrees 5. carry out stage 4 for bolts 3,4,5 & 6 then bolts 7,8,9 &10 Sequence, 8 4 1 5 9 7 3 2 6 10 Bolts 9 & 10 are flywheel side of the engine.

Jan 28, 2009 | 2000 Renault Sportwagon

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

116 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Boyet Soriano
Boyet Soriano

Level 2 Expert

293 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...