Question about 2000 GMC Sierra
Location of where power pack is located of motor
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Under the truck....under the drivers feet area.
Posted on Oct 29, 2009
Testimonial: "thanks for the location.it's not my truck,I wanted to know what tools to bring."
behind the converter on the passenger side the furthest from the engine
Posted on Feb 25, 2010
Testimonial: "Thanks for the speedy response. The only think that would make it even better if you sent me a diagram of the location. This a great free service. "
The blower motor is on the passengers side under the dash.You might have to remove the a lower panel.This is the insulator panel.If the blower works at all just turn it on and follow the noise.Hope this helps.Good luck.
Posted on Apr 08, 2010
SOURCE: I need the location of
The cabin air filters are located in the heater box above the lower panel, mounted below the glove box.drop the plastic panel, 3-7mm screws, then you will see a black access panel, with 1 screw holding it up. the 2 filters are located there. Good luck...
Posted on Sep 24, 2010
well if it does have one it should be by the blower motor or behind glovebox but my best bet its ure thermistor its bad, assuming fuse and relays are fine, remotely think ure controls are bad.
Posted on Dec 30, 2012
Tips for a great answer:
Dec 30, 2010 | 1999 GMC Sierra
Oct 13, 2010 | 2003 GMC Sierra
Sep 23, 2010 | 2000 GMC Sierra
Apr 19, 2010 | 2000 GMC Sierra
Apr 08, 2010 | 2004 GMC Sierra 1500 Crew Cab
Sep 01, 2009 | 2003 GMC Sierra 2500HD
Apr 15, 2009 | 1999 GMC Sierra
50 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: