Question about 2008 Chevrolet Malibu

Open Question

How to change license plate bulb on a 1999 chevy cavalier

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1027 Answers

SOURCE: license plate light replacement

The license plate lights are in the ledge above the license plate. 2 screws keep the lens cover in place. Remove the screws, and the cover comes off. Just pull the lamp out (wedge base) and replace.

Posted on Apr 18, 2009

  • 1 Answer

SOURCE: replacing license plate lights on Chevy Trailblazer

I just had the same problem. I took the cover off, saw the white bulb base, twisted it to take it out, but it popped back inside the door. I got it out, but it wouldn't pull through, so I twisted it back in place and went to Autozone to get new bulb. Once I saw the new bulb, it was obvious, just the bulb itself pulls out. There's so little room to work, I couldn't get it with just my fingers - - maybe rubber gloves would have worked, but I used pliers, lightly, wiggled it a little and it popped right out. I had a similar issue once with the taillight bulb and had to break the bulb and then grip the remaining filament wires with pliers to get it out, so that was my backup plan, just in case.

Hope this helps others.

Posted on Apr 19, 2009

  • 25 Answers

SOURCE: license plate lights not working.

check and see if u have power at socket

Posted on Jun 25, 2009

  • 69 Answers

SOURCE: license plate light do not work changed fuses and

check ground wire and clean bulb socket and contact points well with a high # grit sand paper

Posted on Dec 07, 2009

  • 1 Answer

SOURCE: license plate bulb needs replacing

Remove license plate. Unscrew the screws on the underside of the bumper. Slide the lights back toward the trunk and then down through the opening. Unscrew bulb and replace with a new one.

Reverse steps to reinstall the lights.

Posted on Feb 08, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I change my rear License plate light bulb on my 1999 Plymouth Voyager minivan.


If it is not possible to take the lens off from the outside. (this is the normal way on most cars) Open the tailgate and remove the whole interior panel. Its not as hard as it sounds. This should allow access.

Sep 03, 2015 | Plymouth Cars & Trucks

1 Answer

Cannot access rear license plate bulbs


access them from behind rear bumper cover John

Jan 17, 2014 | 1992 Chevrolet Cavalier

1 Answer

How to change license plate bulb in chevy tracker ?


The light socket goes in from the back it's rubber and only truns a quarter of a turn and pull out. the bulb is a 194 and most all dept stores and auto parts stores will have them they are a very common bulb. a 168 will also fit.

Aug 22, 2011 | 1999 Chevrolet Tracker

1 Answer

Replace license plate bulb.


You need to pull the cover of the bulb off, There may be a clip it may need help from a screwdriver. Replace the bulb and replace the cover

Jul 05, 2010 | 1999 Chevrolet Silverado 1500

1 Answer

Bulb on license plate is out and cruise control. 2004 cavalier


The two problems should not be related to one another. The the fuses for the park lights and the cruise control. The license plate bulb is wired along with the rest of your park lights. If the rest of the park lights are working then check for power and ground at the bulb holder. If you have both there, check the bulb and the fit again. If no power or ground is there you will have to trace the wires. If the fuse is not blown to the cruise control, more information is required to trouble shoot any further.

Apr 21, 2010 | 2004 Chevrolet Cavalier

1 Answer

How to change a license plate bulb on a 98 cavalier? I have pulled the wire out but the bulb would not turn or come out.


You must push in, turn, and then pull out. Many get stuck or rusted and you will need pliers or needle nose to remove

Nov 20, 2009 | 1996 Chevrolet Cavalier

1 Answer

1999 Dodge Neon rear license Plate bulb


LICENSE PLATE LAMP BULB
REMOVAL
  1. Remove screws attaching license plate lamp to rear bumper
  2. Remove lamp from bumper.
  3. Remove bulb socket from lamp.
  4. Pull bulb from socket.

INSTALLATION
  1. Install bulb into socket.
  2. Install bulb socket into lamp.
  3. Place lamp in position.
  4. Install screws attaching license plate lamp to rear bumper.

Oct 08, 2009 | 1999 Dodge Neon

1 Answer

Bulb # for 2004 astro van license plate bulb


Sylvania bulbs:

License plate
194
194LL Long Life Upgrade: Up to twice the life of the standard lamp

Jul 10, 2009 | 2004 Chevrolet Cavalier

2 Answers

License plate bulb


how to replace the Dodge durango 2004 number plate light

Jan 20, 2009 | 1999 Dodge Durango

Not finding what you are looking for?
2008 Chevrolet Malibu Logo

Related Topics:

42 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...