Question about 1997 Jeep Grand Cherokee
When it is 50 degrees outside or above no problem
This is normal, the oil is cold and thick. wait a few minutes for the transmission to warm up of a morning, also consider servicing the transmission and replacing the oil.
Posted on Jan 18, 2013
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
get a couple bottles of gas line antifreeze .. if you don't already use it and add it to the gas.
P.S. in minus 40 i don't even get out of bed... minus 23 here last nite... isn't winter grand
Posted on Jan 21, 2009
Calvin...... You need to treat your Jeep to a new THERMOSTAT. The Overdrive is connected to the engine coolant temperature and if the engine is n ot warmed up properly, the Overdrive will not engage. Try to get a thermostat from the Jeep dealer so you will have exactly the right one, some of the cheapoie ones will not work right. Dave in Iowa
Posted on Jan 29, 2009
There are two parts to it, a voltage resistor, and the EL panel itself.
You need to remove the console first. There are 2 screws under the front rubber pad, two under the cup holder, two in the bin. Remove those six first, take the storage bin out, then slide the rear cupholder out, remove the two screws under the cup holder, and one in front of it.
There are a total of 6 flat screws, and 3 self tapping screws you have removed.
Put the parking brake on, shift the tranny to N, and the transfer case to the middle position if equipped.
Remove the entire console. Slide the shifter beezel as far up vertically as you can. There are 4 clips you ned to remove to do it.
You will see a blue and black wire running into the back. Follow those wires to the resistor. You will see a transparent EL panel attatched to the resistor by two clips.
Usually, one or both of these clips has come loose, causing the light to work intermittantly. Clip them back on, and turn on the headlights to confirm that the light works correctly now.
Re-install everything in the opposite order.
Posted on Oct 11, 2009
Tips for a great answer:
Aug 26, 2011 | 1997 Jeep Grand Cherokee
Jul 11, 2011 | 2000 Pontiac Grand Prix
Oct 06, 2017 | 2002 Chevrolet TrailBlazer
Apr 08, 2010 | 1997 Jeep Grand Cherokee
Feb 13, 2010 | 1995 Jeep Grand Cherokee
Feb 11, 2010 | 2006 Jeep Grand Cherokee
Nov 09, 2009 | 2003 Jeep Grand Cherokee
Apr 24, 2009 | 1999 Jeep Grand Cherokee
Jan 29, 2009 | 1997 Jeep Grand Cherokee
Jan 21, 2009 | 1995 Jeep Grand Cherokee
97 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: