Question about 1997 Suzuki Baleno

Open Question

Pin out ecu baleno wiring diagram - 1997 Suzuki Baleno

Posted by Anonymous on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 198 Answers

SOURCE: Engine pinning when accelerating only on cold Suzuki Baleno

Carbon build up on pistons raises engine compression.This is normal.Go up one grade on gas and/or put some fuel additive.If this doesnt solve it,have timing belt/chain inspected may need replaced

Posted on Sep 15, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What's the correct way to put on a plug wires an a 1998 suzuki baleno


Dwayne, Check the attached link. Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
1998 suzuki baleno spark plug wire diagram Google Search

May 31, 2016 | Suzuki Cars & Trucks

1 Answer

Ecu pin out 2mz-fe auto...toyota windom...


[PDF]WIRING DIAGRAM BY MODEL - Apexi

www.apexi-usa.com/manuals/electronics/neo_diagram.pdf
TOYOTA. Table of Applicable Models. ..... The orientation of the ECU depends on the vehicle with ECU pins. Install the ECU fully checking the .... 2MZ?FE. '97.5?'02.1. VEROSSA. JZX110. 1JZ?GTE. '01.8?'04.4. L. T10?b. HW?23.

1997 Camry V6 ECU Pinout - Toyota Nation Forum : Toyota Car and ...

www.toyotanation.com/.../97568-1997-camry-v6-ecu-pinout.html

Sep 19, 2005 - 10 posts - ‎3 authors
So as the title says, Anyone know the pinout to help with a SAFC install? ... look in the apexi install manual, it is t8-f. the same as the 2mz-fe ... Perkins 99 Camry 1mz Build
15 posts
Nov 28, 2012
1mz-fe to 2mz-fe
15 posts
Feb 25, 2010
SAFC Wiring Pin-Out for 94 1MZ-FE - Toyota Nation ...
8 posts
Feb 8, 2008
1996 1mz ecu pinout needed and question
10 posts
Feb 18, 2006
More results from www.toyotanation.com

Dec 03, 2015 | Cars & Trucks

1 Answer

Ecu location in 1997 Suzuki baleno


what country?
some countries use this name for other bodies
which engine?
or usa car (this is a USA forum) is an Esteem for that body
so.... here is that answer.
as seen in the fsm book (factory service manual)
G16 or J18? engine, ill toss dices land on G16B engine.
our ECU is totally diffferent in usa, so hope it is in same spot
or cars are LHD, left hand drive, is yours?
so these words might be wrong, on LHD car.
The Engine Control Module (ECM) is located in the right side of the instrument panel behind the glove box.

so post country next time so we dont have to guess.
cars, engines, smog laws, brakes , lights and vast things vary
by , COUNTRY.

Feb 24, 2015 | 1997 Suzuki Baleno

1 Answer

Pcm wiring diagram


There isn't much to the wiring diagram There is only two wires to the N75 turbo control solenoid.Pin 2 on solenoid green and brown comes from the ECU pin 64 and Pin 1 Green and white wire goes to a 10 pin connector in the plastic channel on the left side of the engine bay pin 6 and then that then goes on to connection 2 (87) in dash panel wiring harness.

Jul 11, 2014 | 2000 Volkswagen Golf

1 Answer

No spark from 1 ign coil on suzuki baleno 1.6


wow , no year, but did show G16 engines.
Grand, is a clue. but is not.
wiki facts: so what country is your car, we are USA here,
and we have not one Baleno here.
the Suzuki Baleno throughout Asia, Australasia, and Europe. In India where it was manufactured by Maruti Suzuki, the Cultus Crescent was sold as the Maruti Baleno

Ive not seen Every version of every G16 engine suzuki made
world wide, only OURS.

1995 to 2007
my wild guess, is your ECU is OBD1 ecu, (do you know?)
and as such, there are no scan tools so only the CEL blink codes
work.
No spark 5 places, 4 sparks dead and coil HV tower term dead.
here is the checks. for all early G16
  1. fuses good, IG-coil and "FI"????
  2. key on head lights work, good turn them off.
  3. keyon CEL glows, (not blinks) if dead fuse blown, if flashing Immobilizer is UNHAPPY.
  4. CEL glows you crank, its lost spark and all ecu cut fuel no spark.
  5. So you insert the diagnostic jumper wire. in the the DLC connnecter under hood and CEL flashes 41 or 42 DTC or?
  6. bingo? code 12 is happy code.
  7. crank for 5 full seconds to see the cause code.
here is the OBD1 year, way to get flash codes
USA until 1995
and outside USA up to 2001 or more.

http://www.fixkick.com/CEL/CEL.html#OBD1codes

no year, makes this very hard,
and no country x10 that. (fueling and spark system vary by COUNTRY !

Jul 08, 2014 | Suzuki Grand Vitara Cars & Trucks

1 Answer

I have a 87 Nissan 300 zx that every time I turn-on the key the fuse for the ecu blows. can any one help?


It could be a short in the wiring- a broken wire, or wire stripped of insulation, and touching metal somewhere. If you could look at a wiring diagram and find that circuit the fuse protects, you should be able to check the wiring without a lot of difficulty. The wire would enter the ecu on a certain pin number, and then you could check the resistance on the wire with a multimeter-with key off, and battery disconnected before unplugging the ecu. You will have to check the wiring all through the circuit, so you really do need a wiring diagram. If the wiring appears to be okay, then suspect a bad ecu. Used and reconditioned ecu's are all over e-bay. Pretty sure you could find one for your car. I just recently bought a used ecu from e-bay for my '87 Sentra, cost was $24.99, some place called auto computer wholesalers. And it works as good as a new one. Or as good as my old one, turns out that wasn't my problem, but I just kept it in the car.
Don't forget to disconnect the negative battery terminal. The ecu in those has constant power to the ecu, even with the key off. So never pull off the ecu connectors with the battery connected.
For a wiring diagram, buy a Haynes repair manual. Or register for free at autozone.com, giving make, model, year, and engine size if applicable. The repair guides do have some wiring diagrams, just not complete maybe. Or if interested, you can buy a subscription for $16.99 a month (or under $30 for a full year) from eautorepair.com. It is a DIY site by Mitchell, and with a very extensive amount of help and information. I had a one month subscription there, after getting very, very depressed with my Chilton manual. Couldn't even find a credible wiring diagram for my '87 from Chilton.

Aug 11, 2013 | 1987 Nissan 300ZX

1 Answer

How do I wire a remote door lock to my 1995 mitsubishi eclipse , what are the wire colors for the power door locks?


Hope this helps. It's for a 2004 eclipse remote start.

12volts white/red (40A) + ignition harness
Starter black/red + ignition harness
Second Starter N/A
Ignition green + ignition harness
Second Ignition N/A
Third Ignition N/A
Accessory blue/red + ignition harness
Second Accessory blue/black + ignition harness
Keysense blue/red ignition harness
Notes: This wire rests at ground, and goes to an open circuit when the key is inserted into the ignition cylinder.
Power Lock purple - pin 33 at ETACS ECU
Notes: The ETACS ECU is attached to the back of the fuse box.
Power Unlock lt. green/red - pin 34 at ETACS ECU
Notes: The ETACS ECU is attached to the back of the fuse box.
Lock Motor lt. green 5wi pin 19, 28 pin plug below fuses
Unlock Motor green/red 5wi pin 22 at ETACS ECU
Notes: The ETACS ECU is attached to the back of the fuse box.
Parking Lights+ green/white + pin 2, 15 pin plug above fuses
Parking Lights- N/A
Hazards green - pin 55 at ETACS ECU
Notes: The ETACS ECU is attached to the back of the fuse box.
Turn Signal(L) green/blue + pin 8, 15 pin plug above fuses
Turn Signal(R) green/yellow + pin 13, 15 pin plug above fuses
Reverse Light red/blue + pin 9, 43 pin plug in driver kick
Door Trigger see notes - see notes
Notes: The driver door trigger is lt. green, pin 6, in a 15 pin plug above the fuses. The passenger door is lt. green/black in pin 65 at the ETACS ECU. Use both wires and diode isolate each.

The ETACS ECU is attached to the back of the fuse box.
Dome Supervision green/orange - pin 1, 3 pin plug above fuses
Trunk/Hatch Pin red - pin 62 or 37 at ETACS ECU
Notes: It is in pin 62 on the coupes, and in pin 37 on the convertible spyders.

The ETACS ECU is attached to the back of the fuse box.
Hood Pin green/red - pin 24 at ETACS ECU
Notes: The ETACS ECU is attached to the back of the fuse box.
Trunk/Hatch Release green/white 5wi pin 32 at ETACS ECU
Notes: The ETACS ECU is attached to the back of the fuse box.
Power Sliding Door N/A
Factory Alarm Arm lt. green/black - pin 42 at ETACS ECU
Notes: Meter this wire while turning the key in the driver door key cylinder.

The ETACS ECU is attached to the back of the fuse box.
Factory Alarm Disarm orange - pin 25 at ETACS ECU
Notes: Meter this wire while turning the key in the driver door key cylinder.

The ETACS ECU is attached to the back of the fuse box.
Disarm No Unlock blue/red - pin 27 at ETACS ECU
Notes: Meter this wire while turning the key in the hatch/trunk key cylinder.

The ETACS ECU is attached to the back of the fuse box.
Tachometer white or black/white ac engine speed detection connector
Notes: The engine speed detection connector is a single pin connector in the fuse/relay box under the hood.

Can also go to one of the ignition coils or the distributor assembly and use the black/blue or white/green wire.
Wait to start N/A
Brake Wire green/orange + brake pedal switch
Parking Brake yellow/green - parking brake switch
Horn Trigger lt. green/black - pin 44 at ETACS ECU
Notes: The ETACS ECU is attached to the back of the fuse box.
Memory Seat 1 N/A
Memory Seat 2 N/A
Memory Seat 3 N/A
Interface Module: Category:
Immobilizer Bypass Required:
Yes Type:
Transponder
Part #: 556UW
Alternate Part1 #: DesignTech 20402
Alternate Part2 #: DesignTech 29402
Notes: Standard on all models.

Good luck.

Mar 02, 2010 | 1995 Mitsubishi Eclipse

1 Answer

Engine pinning when accelerating only on cold Suzuki Baleno


Carbon build up on pistons raises engine compression.This is normal.Go up one grade on gas and/or put some fuel additive.If this doesnt solve it,have timing belt/chain inspected may need replaced

Sep 15, 2009 | 1999 Suzuki Esteem

2 Answers

Electrical diagram


Hi,

Might this help?
They were originally posted here and here.

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards. Thank you for using FixYa.

Aug 16, 2008 | 1992 Toyota Celica

Not finding what you are looking for?
1997 Suzuki Baleno Logo

Related Topics:

276 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Boyet Soriano
Boyet Soriano

Level 2 Expert

293 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...