Question about 1999 Lexus ES 300

Open Question

Cruise Control won't engage, light flashes

If I try to engage my cruise control, it doesn't work and the cruise control green light begins to blink. Please help! Thanks in advance!

Posted by on

  • flyboyj Jan 31, 2009

    Folks, I fixed it myself - adjusted the tension on the cable that went to the unit, and it also helped to plug the connector to it as well!

  • flyboyj Feb 13, 2009

    Fixed it!

×

2 Suggested Answers

emissionwiz
  • 61168 Answers

SOURCE: Lexus RX300 cruise control

I would take it into the dealer and have them check it out, but it sounds like a defective cruise control transducer, that is the part that actually holds the speed.

Posted on Mar 19, 2009

  • 147 Answers

SOURCE: Cruise control does not work, and message "check

cruise control connect with accelerator and engine throttle valve . try to make sure all button +/- is not press continuously press many time make sure not stuck . then off and On.

Posted on Jun 20, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cruise control won't turn off


by cruise control being PCM control have dealership code scan see what causing cruise control turn itself on.

Apr 18, 2013 | Infiniti Cars & Trucks

1 Answer

Cruise control lights go on but cruise won't engage


Is you brake light working properly?

Feb 04, 2013 | Cars & Trucks

1 Answer

Why does my Cruise Control light flash when engaging?


Its the brake system.
The flashing light tells you something is wrong with the cruise components. Could be the brake light switch, or the ABS if equipped.

Jul 19, 2012 | 1997 Nissan Sentra

1 Answer

I engage cruise control, green light turns on in panel but cruise control doesn't hold speed.


2 things u have to chk First chk with crouise cantrol thier well be on small vacume pipe that would be out Or crouise control machine had jamed

Jul 01, 2011 | Ford Explorer Cars & Trucks

1 Answer

Taurus 2000 cruise control


i've been told it's speed sensors. I have the same on my 1999, but my light flashes when i try to engage. And 1 out of 10 times, it engages and I can cruise. Just not worth it to me to fix. Ford never claimed there was a problem.

Apr 01, 2010 | 1999 Ford Taurus

1 Answer

2003 Ford Explorer Cruise Control


Check the speed control deactivation switch on the master cylinder. disconnect and use a jumper wire to connect the wires together. If the cruise works it's the switch.

May 27, 2009 | 2003 Ford Explorer

1 Answer

Cruise control indicater lights are on but will not engage


Check the cruise control module connector, see if it looks good and there is power to the module over one of the white wires in the 10 pin connector.
There are two white wires going to the module which is located at pins "G" and "J". There should be no voltage at pin "G" until the brake switch is applied. This switch is also used to operate the brake lights. The two wire colors on this switch are white and orange. At pin "J", this signal goes to the PCM to tell it that the cruise control module is engaged. Here is the info on the cruise control connector:

Pin A: gray - cruise control on switch signal: 12VDC with cruise switch on
Pin B: dark blue - cruise control set/coast switch signal: 12VDC with switch pressed
Pin C: gray/black - cruise control resume/accel switch signal: 12VDC with switch pressed
Pin D: brown - cruise control release signal: 12VDC with brake pedal not pressed: 0V when pressed
Pin E: black/white - ground
Pin F: brown - ignition 3 voltage: 12VDC with ignition on
Pin G: white - stop lamp switch signal: 0V with brake pedal not pressed: 12VDC when pressed
Pin H: dark green - cruise control inhibit signal: 0V if PCM detects an inhibit condition
Pin J: white - cruise control engaged signal: voltage (unsure of value, either 12VDC or 5VDC) when signal engaged
Pin K: dark green - vehicle speed signal: 1 to 5 volts depending on speed

This view of connector is facing it after it is separated.

Trying to post the connector view, the lines may not quite line up, but at least it should show you the pin positions.

| F  G H J K |

| E D C B A | 

May 09, 2009 | 2002 Chevrolet Impala

2 Answers

Cruise control will not stay engaged


When I try to engage the cruise control, the dash light flashes, but it doesn't stay on.

Mar 28, 2009 | 2003 Ford Explorer Sport Trac

2 Answers

Abs light is on and cruise control does not engage


it sounds like the speed sensor in the rear differential is faulty

Mar 28, 2009 | 2003 Ford Explorer

Not finding what you are looking for?
1999 Lexus ES 300 Logo

Related Topics:

68 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexus Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Lexus Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...