Question about 2005 Chevrolet Equinox
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
With all due respect for the opinion - I suggest you will do it better working from the underside for the 3 on the rear of engine.
Four points in your story motivated me to try from the underside (and I just finished the job without any hicups):
- mechanics suggested from the underside
- 130 lb sitting in the engine compartment will likely damage or crack something
- removing the distributor should not be needed
I drove the car with the front wheels on a pair of inclines to get more clearance underneath, secured it, then squezed from the front between the wheels. A good thin flurescent light can fit from the bottom up to help you see what you're doing.
The boots from the spark plugs I removed without much effort, then with fingertips I felt the exact place of the plugs. I fit a short 3" extension over the socket, then squeezed the handle and started turning. All theree came out without problems (before removing completely I also squeezed the extension pipe of a can of compressed air and blew air to clean around the plugs).
You need to "see" with your fingers and remember how the plugs are inclined to fit the new ones, but otherwise is just a little exhausting that you have to be a contortionist and find a good position (something to raise your head while working underneath, like a cardboard box would be useful).
So the bottom line is that it works as well from the bottom and don't have to remove anything else.
Posted on Mar 01, 2009
SOURCE: 2005 equinox with P0405 code.
Do you have an odd smell in the interior compartment? This could be due to the egr being damaged from debris from the road. Hire a professional to do it or go to a car parts store and get the motors repair manual or similar.
Posted on Mar 12, 2009
open the hood and find the dipstick for the tranny, passenger side up by the firewall, there are instructions most of the time on the dip stick.
have the car running and in park, on the dipstick there will be a cold mark for if the tranny is not warmed up, and a hot mark for if the tranny is at running temp. mark sure the fluid is in the checkered lines if not add fluid
Posted on Sep 27, 2009
SOURCE: 2005 chevrolet equinox with rear
ive got a 07 equinox and the rear hatch wont open as of yesterday. on the inside of the hatch there is an access plug you can pop off and inside you'll see a metal switch with a hole in it. if you push it away from yourself, it will unlatch it. i dont know why the hatch wont open as ive checked the fuse and its ok.
Posted on Mar 13, 2010
Tips for a great answer:
Feb 09, 2016 | 2005 Chevrolet Equinox LS
Aug 06, 2014 | 2005 Chevrolet Equinox
Feb 10, 2014 | 2005 Chevrolet Equinox
Apr 23, 2017 | Chevrolet Equinox Cars & Trucks
Jan 11, 2012 | 2005 Chevrolet Equinox
Feb 08, 2011 | 2005 Chevrolet Equinox
Dec 26, 2010 | 2005 Chevrolet Equinox
Dec 17, 2010 | 2005 Chevrolet Equinox
Mar 20, 2009 | 2005 Chevrolet Equinox
Mar 12, 2009 | 2005 Chevrolet Equinox
48 people viewed this question
Usually answered in minutes!