Question about 2003 Pontiac Grand Am

Open Question

1225 1226 CODE ON 2003 GRAND AM SERVICE LIGHT AND ABS LIGHT

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

csmock132
  • 4669 Answers

SOURCE: abs light, trac light, service engine soon light 2001 Pontiac Grand Am

Sounds like you have a bad wheel speed sensor. You need to have it scanned. Since it's been sitting, it might just be a bad connection to one of the speed sensors.

Posted on Jun 02, 2009

honeymokey
  • 3113 Answers

SOURCE: Grand Am 2003 "service engine soon" light

The service light means something is wrong with the car and it needs attention now. Get the codes checked and that will tell you what is wrong with it.

Posted on Jun 17, 2009

  • 23 Answers

SOURCE: service engine light and abs and ets lights on

take it in to do a code search

Posted on Nov 10, 2009

  • 61 Answers

SOURCE: 2003 Grand AM Service engine soon light is on, ABS

There is a variety of things that could cause the light to come on, you will need to have the car scanned for codes to verify what is causing the MIL, ABS, and TRAC lights to come on. No way to determine this until you have it scanned.

Posted on Nov 16, 2009

  • 1 Answer

SOURCE: abs light and brake light are on. also service

abs an trac control light on replaced abs wheel sensor lights still on

Posted on Aug 29, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2003 grand am, abs, trac and service light come on. vibrates going down road approximatly going 55-60 mph, but not on braking.


sounds like you may have a bad wheel bearing. The first thing to do is find out what code is in the abs computer. You will need a higher end scan tool to do this. Once you know what sensor is causing the light to come on you can focus on that wheel.

I suspect the bearing is probably bad enough that you could spin each wheel by hand and hear it growl. It also may be sloppy if you push/pull each wheel at the 12 and 6 o'clock position.

Jul 23, 2012 | 2003 Pontiac Grand Am

1 Answer

Service engine, abs, trac off


The service engine light does not affect the abs.You most likely have a broken wire in your abs system which is affected by suspension movement.A code reader which does abs codes will tell you which wheel circuit is turning on the abs light.When there is no abs available the track will turn off.

Jul 03, 2017 | 2000 Pontiac Grand Am GT

1 Answer

Why do the Trac off light, ABS light and Service Engine soon light stay on


you have a fault code in one of the modules
you need to have it scanned and get a code before i can help you

Dec 19, 2009 | 2003 Pontiac Grand Am

2 Answers

2003 Grand AM Service engine soon light is on, ABS light is on and Traction control light is on. I suspect it is one of the wheel sensors? And if so which one?


You would need a scaner to pull data out of your computer, go into the A.B.S. mode scroll to wheel speed sensor, while some one drives the car for you, check MPH on front and rear wheels sensor, the one that show 0 MPH is the bad sensor. Replace and recheck, Also check harnness first.

Nov 16, 2009 | 2003 Pontiac Grand Am

2 Answers

Abs light and brake light are on. also service


You can test the wheel speed sensors by unhooking the connectors and put ohmeter test leads on the sensor terminals should read around 1100-1600 ohms also the connectors themselves were bad for wires breaking inside the insulation at the connectors from flexing when the wheel is turned back and forth..Note excessive wheel bearing noise from bad bearings have also been known for interferring with clean abs signal also causing abs codes good luck

Nov 06, 2009 | 2004 Pontiac Grand Am

1 Answer

When I start my car the ABS, trac control and service engine light come on. It strated to happen every once in a while, now all the time. Any ideas?


all three lights are on because of an abs problem,have the abs system scanned for codes and that should point you in the right direction,usually a front abs sensor problem,hope this helps

Oct 21, 2009 | 2003 Pontiac Grand Am

1 Answer

Check engine light, ETS light and ABS Lights all on


You would need to get the codes read from the computer as these may all be related. A check engine light can cause an ETS, which inturn can cause an ABS, or vice-versa.

May 05, 2009 | 2003 Pontiac Grand Am

Not finding what you are looking for?
2003 Pontiac Grand Am Logo

Related Topics:

29 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...