Question about 1993 Toyota Previa
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Yeah you can remove the hood and enginge but it's much harder that way! Just kidding the dash is notthat hard to get out one speedo cable and four screws witll get the speedo head out so you can change the bulbs, they are miniture bulbs to.
Posted on Jun 21, 2009
Removal & Installation
It may be necessary to remove the upper radiator shroud to perform this procedure.
Disconnect the coolant reservoir
4. Disconnect the coolant reservoir and power steering brackets from the side of the heating unit box.
Remove the coolant reservoir bracket from the side of the heater unit
Separate the power steering reservoir bracket from the side of the unit also
5. Remove the two bolts that attach the upper and lower portion of the heater box. 6. Disconnect the control cable on the side of the heater unit box.
Disconnect the control cable on the drivers side of the unit
7. Remove the eight nuts retaining the unit.
Remove the nuts (8) from around the heater unit
There are 4 nuts on each side of the unit
8. Disconnect the heater control valve bracket from the heater box.
9. Separate the top of the control box from the bottom.
Separate the upper case from the lower
Posted on Dec 02, 2009
I do a lot of work on Toyota Previa before; including rebuilt engine, swapping engine and transmission and lot of things in between, but never swap a normal aspirated engine to a supercharged engine or diesel. Since i have some experience in Previa, I would like to share my opinion with you regarding your plan to swapping the normal aspirated Previa engine to a Supercharged engine. When you do a swapp like that, you will not only be dealing with just swapping engine, but some wiring, computer, throttle body, air cleaner assembly, extra frame and pulley on the accessory items, transmission as well as a right rear end to get the correct gear ratio to accomodate the new engine and transmission. I can go on even more, but let me tell you this, beside less headache, it would definitely cheaper if you were to find a Supercharged Previa and fix it up. However, if you are totally motivated to do this project, keep in mind, this engine swap will be a long term and time consuming project.l I wish you best of luck and have fun!
Posted on Jan 17, 2010
Directly above the radio at the top of the dash. Release lever at top of & center of heater controls will release cover. The cover is about 8 inchs square.
Posted on Feb 06, 2010
Testimonial: "When you buy a used car the first thing you look for is service areas. Knowing where they are located is not always easy on imports with out a manual"
pop fuse cover, remove vent housing, remove speedo upper cover, remove 4 bolts holding speedo remove speedo, change bulb
Posted on Aug 17, 2010
Tips for a great answer:
Dec 19, 2013 | 1995 Toyota Previa
Feb 13, 2012 | 1991 Toyota Previa
Jan 09, 2011 | 1991 Toyota Previa
Dec 30, 2010 | 1991 Toyota Previa
Oct 18, 2010 | 1991 Toyota Previa
Mar 31, 2010 | 1991 Toyota Previa
Feb 06, 2010 | 1991 Toyota Previa
Dec 06, 2009 | 1992 Toyota Previa
Aug 25, 2009 | 1991 Toyota Previa
74 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: