Question about 1999 Dodge Ram 2500 4WD

Open Question

2001 dodge ram 2500 oil pressure sending unit fuse location

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
michigan man
  • 3533 Answers

SOURCE: Where is the oil sending unit on a 2002 dodge ram 1500 4.7 L?

it normally is located near the oil filter it looks like a little plug with a wire on it

Posted on Apr 04, 2009

Ad
motor1258
  • 6674 Answers

SOURCE: Oil pressure sending unit.

Back of engine, passenger side of distributor, in engine block.

Posted on Apr 19, 2009

  • 701 Answers

SOURCE: where is oil pressure sensor located on 2001 dodge 2500 cummins?

Hello mhak330: My name is Roger and I can give you the answer to your question. Locate the ECM on the drivers side of the engine.look for the bottom bolt holding the ECM. To the right of the bolt you should see the oil pressure sender unit. Should you need further help please just ask. Please rate the quality of your answer. This way we know you received helpful information. Thank You for using Fix Ya. Roger

Posted on Jul 07, 2009

  • 1 Answer

SOURCE: oil pressure sending unit location

oil pressure sending unit show location on 2000 dodge caravan V-6

Posted on Nov 28, 2009

  • 1348 Answers

SOURCE: 2001 dodge ram 2500 v10 oil pressure drops to 0 then back up

you need to put an oil pressure gauge on it and see what happens.what you will find is that the sender unit is no good.

Posted on May 18, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Oil pressure light comes on every now and again 1995 dodge ram van b2500 5.9l non turbo


The only way to know if you need engine repair or you have a bad sender is to hook up an oil pressure test gage to the sender port and manually check the pressure. You will need the deep oil pressure sending unit removal tool to get the sender out (I did this).

Nov 09, 2016 | 1995 Dodge Ram 2500

1 Answer

Oil pressure gauge in my 2001 2500 dodge ram diesel is at 0. the check gauge light came on. Plenty of oil. what could it be


Any number of things but do not drive the truck. Possible sheared oil pump drive. Possible electrical fault in oil pressure sense and warning system. If it is an emergency you can loosen the oil filter a little to allow it to leak, start the truck briefly and see if oil is pushed out under pressure. This tells you if the oil pump is OK. Personally I would have the truck towed to a garage or dealer.

Mar 05, 2011 | 2001 Dodge Ram 2500 Truck

1 Answer

Where is the filter located on a 2001 dodge ram


2001 Dodge Truck RAM 2500 3/4 ton 4WD 5.9L Turbo Diesel 6cyl the Fuel Filter is located under hood, passenger side, lower engine area, mounted above starter.

2001 Dodge Truck RAM 2500 3/4 ton 4WD 5.9L SFI 8cyl the Fuel Filter is located under vehicle, center, below seating area, mounted on top of fuel tank, in fuel pump module.

Hope helps with this (remember rated the help).

Jun 01, 2010 | 2001 Dodge Ram 2500 Truck

1 Answer

2001 dodge ram 2500 v10 oil pressure drops to 0 then back up


you need to put an oil pressure gauge on it and see what happens.what you will find is that the sender unit is no good.

May 18, 2010 | 2001 Dodge Ram 2500 Truck

1 Answer

Where is oil pressure sensor located on 2001 dodge 2500 cummins?


Hello mhak330: My name is Roger and I can give you the answer to your question. Locate the ECM on the drivers side of the engine.look for the bottom bolt holding the ECM. To the right of the bolt you should see the oil pressure sender unit. Should you need further help please just ask. Please rate the quality of your answer. This way we know you received helpful information. Thank You for using Fix Ya. Roger

Jul 07, 2009 | 2006 Dodge Ram 2500

2 Answers

I have a 1996 dodge ram 2500, 5.2L, the oil light comes on and the oil gauge fluxuates, but there is plenty of oil in it. There in no apparent issues with the oil pump (no grinding/squeeling) I am...


Just to add, hope this helps with sensor location. The spec I saw was 30--80 psi oil pressure at 3000 rpms. In the old days they used to say for generic spec, 10 psi for every 1000 rpms. Always use the proper spec. You might be able to use analog pressure gage to screw in to replace sending unit to double check oil pressure. Just my opinion.
oil pressure sensor-4huwoipbrym33jqugcbdeycf-5-0.jpg

Nov 26, 2017 | 1996 Dodge Ram 2500 Club Cab

1 Answer

Oil pressure sending unit.


Back of engine, passenger side of distributor, in engine block.

Apr 18, 2009 | 2001 Dodge Ram 1500 Truck 2WD

1 Answer

Where is the oil sending unit on a 2002 dodge ram 1500 4.7 L?


it normally is located near the oil filter it looks like a little plug with a wire on it

Mar 31, 2009 | 2001 Dodge Ram 1500 Truck 2WD

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

51 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...