Question about Cars & Trucks

Open Question

Head torque setting for Nissan Sentra 1992,1600,16v

Posted by Anonymous on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

NismoMaster
  • 146 Answers

SOURCE: torque settings for cylinder head nissan sentra

Tighten in sequence to 29ft.lbs then tighten in sequence to 58ft lbs. then loosen all bolts. Then tighten in sequence to 33ft lbs. then tighten each bolt in sequence 90 degrees then tighten each bolt again 90 degrees

Posted on Jul 26, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

WHAT IS THE TORQUE SETTING FOR A 1997 NISSAN SENTRA 160SE, FUEL INJECTED, NOT THE FACE LIFT


for the head or what , be a little more specific on your question everything gets torqued on a motor

Aug 15, 2014 | 1997 Nissan Sentra

1 Answer

Cylinder head torque settings


Here's a link to your cylinder head torque sittings Pieter.

Dec 07, 2013 | 1989 Nissan Sentra 4 Door

1 Answer

Need engine head torque settings for 2005 nissan sentra 2.5


Can be found in the Haynes repair manual, available at an auto parts store for appx $25.00.

Jun 07, 2012 | 2004 Nissan Sentra

1 Answer

I am putting a head gasket on my 2005 nissan sentra 1.8 needing all the torqe settings for the head and cam pretty much all the torque settings that has to do wwith replacing the head gasket would help me...


you can go to any auto parts store and buy a haynes manual for your car. they are based on a complete teardown of vehicle, this manual will tell the torque ratings. for about 25.00 dollars.and much more. have a good day !

Jun 22, 2011 | 2005 Nissan Sentra

3 Answers

Torque settings for cylinder head nissan sentra


Tighten in sequence to 29ft.lbs then tighten in sequence to 58ft lbs. then loosen all bolts. Then tighten in sequence to 33ft lbs. then tighten each bolt in sequence 90 degrees then tighten each bolt again 90 degrees

Jul 18, 2009 | 1999 Nissan Sentra

1 Answer

Engine head torque settings for 2005 nissan sentra 1.8


email me ill send you it via email cant post here too bigg!!

May 29, 2009 | 2005 Nissan Sentra

1 Answer

Need engine head torque settings for 2005 nissan sentra 1.8


this is a 6 step procedure first tighten to 37 ft pounds all bolts step 2 turn all bolts 60 degrees step 3 loosen all bolts step 4 retighten to 30 ft pounds step 5 turn bolts 75 degrees and step 6 turn all bolt another 75 degrees

May 29, 2009 | 2005 Nissan Sentra

1 Answer

Need 1990 nissan sentra torque settings and valve clearence


heinrichkemp: The engine in your car is a GA16i
I venture you are asking about the head bolts when you refer to torque settings. The head bolts used on this motor are torque to yield (streach bolts) If you are reusing them, you need to check them to insure they are not stretched beyond limits.
The way you measure the bolt is with a micrometer.
Measuring close to the end where the bolt starts to thread in, about 10-12 threads up, take a reading. Now, go to the other end of the bolt where the threads end and measure about 10 threads in.
There should not be more than a .009 inch difference (.228mm). If there is, discard the bold and get a new one.

You must use a sequence to tighten the bolts, below is the sequence.
11
13 9 3 1 6 8

14 7 5 2 4 10
12 15

torque 11,12,13,14 & 15 to 8.3 Nm (6.1 ft lbs)
Torque the main head bolts by the numbered sequence to
29Nm (22 ft lbs) first pull
64Nm (47 ft lbs) second pull
Loosten all the bolts completely
Tighten the to 29Nm (22 ft lbs) first pull
Tighten bolt # 1 clockwise 85 degrees
Tighten bolts #2- 10 65 degrees
Nissan noted that if you do not have a torque angel meter, you can use a regular torque wrench and torque all the bolts to 69Nm (51 ft lbs)
The valves on this engine have hydraulic lifters, consequently require no adjustment.

Apr 11, 2009 | 1990 Nissan Sentra

1 Answer

Hi I ned to know about head bolt torque nissan sentra 1997


hi.im a mechanic from the philippines.the torque of all your cylinder head for your nissan sentra 1997 is 60 nm.apply 30 nm of torque first on all the cylinderhead bolts then torque it agian directly to 60 nm. i also drive and repair nissan cars.

Aug 07, 2008 | 1989 Nissan Sentra 4 Door

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

74 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...