Question about Chevrolet Cavalier
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: gmc sierra turn flasher location
The flasher on this vehicle looks nothing like the flasher's of yesteryear. It will be located behind the drivers side knee bolster(under the steering wheel). It will be a small black box that is about 3 inches wide, 2 inches deep, and 1 inch thick. It may be somewhat difficult to locate because on some of the GM trucks they actually hide it behind the guage cluster bezel but to the left of the guages. Let me know if I can help you any further.
Posted on Aug 21, 2008
SOURCE: Turn signal light flasher unit
Remove the dash cover that has the fuse cover dorr on it (2 screws). Then remove the metal bracket ubder this panel (4 screws). Look up on the side next to center console.Next to a blue box is the flasher. Know if someone can figure out how to remove flasher let me know.
Posted on Jan 18, 2009
It is located on the brake pedal braket. The flasher module wuill have a connector going to it that has 5 wires in it...pink, orange, brown, purple and black.
Posted on Dec 05, 2009
On the 1993 Sedan de Ville, The hazard flasher is easy to locate, under the dash between the steering column and the radio. Looking up, you will see the smooth round side of the flasher and the wires will be attached to the top.
The turn signal flasher is more difficult to get to, but readily accessed with a T-15 torx driver and a little patience. It is located to the left of the steering column, but is most easily accessed through the dash panel instead of from underneath.
1. remove the T-15 screw from above the headlight switch, above the fuel data center, and above the small panel similar to the one around headlight switch. All of these are somewhat hidden, and you'll need to feel for them or get low and look up at them.
2. Using a bent piece of wire or an allen wrench, or anything else handy, pull off the small trim piece that is directly below the steering column. On my car, this is wood-grained plastic. This will expose two more screws that need to be removed.
3. Now, you should be able to remove the large dash trim panel that goes around the fuel data center.
4. Unscrew the two T-15 screws that hold the fuel data center into the dash, and it should pull straight forward. There should be plenty of wire to move it out of the way.
5. The turn signal flasher is the silver can that you see to the right in the opening you just created by removing the fuel data center module. It has a single plug with two conductors on the back. I had to use a small screwdriver to pry it off.
It is a different part number, so I don't know if you can just swap it for the hazard flasher to test it like you can on many cars. I just replaced mine with a Wagner 323, which is what came out of mine.
Posted on Apr 30, 2010
Tips for a great answer:
Aug 16, 2014 | 2001 Chevrolet Cavalier
Feb 17, 2011 | 2001 Chevrolet Cavalier
Jan 14, 2011 | 1995 Chevrolet Cavalier
Dec 17, 2010 | 2001 Chevrolet Cavalier
Oct 09, 2010 | 1994 Chevrolet Cavalier
Jan 28, 2010 | 2001 Chevrolet Cavalier
Feb 28, 2009 | 2001 Chevrolet Cavalier
77 people viewed this question
Usually answered in minutes!